[PATCH] staging: nvec: fix block comment style

[PATCH] staging: nvec: fix block comment style

[Afkari Zergaw]

Convert a block comment in nvec.c to follow the kernel block
comment style where subsequent lines start with '*'.

Signed-off-by: Afkari Zergaw <afkarizergaw12@gmail.com>
---
 drivers/staging/nvec/nvec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index e9af66a08448..0e655f79ea4a 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -660,7 +660,8 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
 			to_send = nvec->tx->data[0];
 			nvec->tx->pos = 1;
 			/* delay ACK due to AP20 HW Bug
-			   do not replace by usleep_range */
+			 * do not replace by usleep_range
+			 */
 			udelay(33);
 		} else if (status == (I2C_SL_IRQ)) {
 			nvec->rx->data[1] = received;
-- 
2.43.0

Re: [PATCH] staging: nvec: fix block comment style

[Greg KH]

On Mon, Mar 02, 2026 at 01:40:15AM +0000, Afkari Zergaw wrote:
> Convert a block comment in nvec.c to follow the kernel block
> comment style where subsequent lines start with '*'.
> 
> Signed-off-by: Afkari Zergaw <afkarizergaw12@gmail.com>
> ---
>  drivers/staging/nvec/nvec.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
> index e9af66a08448..0e655f79ea4a 100644
> --- a/drivers/staging/nvec/nvec.c
> +++ b/drivers/staging/nvec/nvec.c
> @@ -660,7 +660,8 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
>  			to_send = nvec->tx->data[0];
>  			nvec->tx->pos = 1;
>  			/* delay ACK due to AP20 HW Bug
> -			   do not replace by usleep_range */
> +			 * do not replace by usleep_range
> +			 */
>  			udelay(33);
>  		} else if (status == (I2C_SL_IRQ)) {
>  			nvec->rx->data[1] = received;
> -- 
> 2.43.0
> 
> 

Does not apply to my tree :(

[PATCH] staging: nvec: fix block comment style

[Avon-Hermit]

Convert a block comment describing the AP20 hardware bug workaround
to the preferred kernel block comment format.

This change only adjusts the comment style and does not modify the
behavior of the driver.

Signed-off-by: Avon-Hermit <avon.hermit@gmail.com>
---
 drivers/staging/nvec/nvec.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index e9af66a08448..736f11942174 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -659,8 +659,9 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
 			nvec_tx_set(nvec);
 			to_send = nvec->tx->data[0];
 			nvec->tx->pos = 1;
-			/* delay ACK due to AP20 HW Bug
-			   do not replace by usleep_range */
+			/*
+			 * Delay ACK due to AP20 HW Bug; do not replace by usleep_range.
+			 */
 			udelay(33);
 		} else if (status == (I2C_SL_IRQ)) {
 			nvec->rx->data[1] = received;
-- 
2.47.3

Re: [PATCH] staging: nvec: fix block comment style

[Avon Hermit]

Hi,

Sorry, I didn't notice the earlier patch.
Please ignore this one.

Thanks,
Avon

On Wed, Mar 04, 2026 at 01:47:20PM +0800, Avon-Hermit wrote:
> Convert a block comment describing the AP20 hardware bug workaround
> to the preferred kernel block comment format.
> 
> This change only adjusts the comment style and does not modify the
> behavior of the driver.
> 
> Signed-off-by: Avon-Hermit <avon.hermit@gmail.com>
> ---
>  drivers/staging/nvec/nvec.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
> index e9af66a08448..736f11942174 100644
> --- a/drivers/staging/nvec/nvec.c
> +++ b/drivers/staging/nvec/nvec.c
> @@ -659,8 +659,9 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
>  			nvec_tx_set(nvec);
>  			to_send = nvec->tx->data[0];
>  			nvec->tx->pos = 1;
> -			/* delay ACK due to AP20 HW Bug
> -			   do not replace by usleep_range */
> +			/*
> +			 * Delay ACK due to AP20 HW Bug; do not replace by usleep_range.
> +			 */
>  			udelay(33);
>  		} else if (status == (I2C_SL_IRQ)) {
>  			nvec->rx->data[1] = received;
> -- 
> 2.47.3
> 

[PATCH] staging: nvec: fix block comment style

[claude-bot]

Fix multi-line block comment to follow kernel coding style.
Block comments should use * on subsequent lines and have the
trailing */ on a separate line.

Signed-off-by: claude-bot <andrz2-claude@proton.me>
---
 drivers/staging/nvec/nvec.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index e9af66a08..62013019a 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -659,8 +659,10 @@ static irqreturn_t nvec_interrupt(int irq, void *dev)
 			nvec_tx_set(nvec);
 			to_send = nvec->tx->data[0];
 			nvec->tx->pos = 1;
-			/* delay ACK due to AP20 HW Bug
-			   do not replace by usleep_range */
+			/*
+			 * delay ACK due to AP20 HW Bug
+			 * do not replace by usleep_range
+			 */
 			udelay(33);
 		} else if (status == (I2C_SL_IRQ)) {
 			nvec->rx->data[1] = received;
-- 
2.53.0