From: Prithvi Tambewagh <activprithvi@gmail.com>
To: gregkh@linuxfoundation.org, abrahamadekunle50@gmail.com,
b9788213@gmail.com, straube.linux@gmail.com,
ethantidmore06@gmail.com, andriy.shevchenko@linux.intel.com,
dan.carpenter@linaro.org, weibu@redadmin.org,
knavaneeth786@gmail.com, ignacio.pena87@gmail.com,
dharanitharan725@gmail.com, samasth.norway.ananda@oracle.com,
lukagejak5@gmail.com, karanja99erick@gmail.com,
s9430939@naver.com, suunj1331@gmail.com, ysinghcin@gmail.com
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-kernel-mentees@lists.linux.dev, skhan@linuxfoundation.org,
david.hunter.linux@gmail.com, khalid@kernel.org,
Prithvi Tambewagh <activprithvi@gmail.com>
Subject: [RFT PATCH v3 1/5] staging: rtl8723bs: move constant to right side of test in comparison
Date: Sun, 5 Apr 2026 17:11:28 +0530 [thread overview]
Message-ID: <20260405114132.310774-2-activprithvi@gmail.com> (raw)
In-Reply-To: <20260405114132.310774-1-activprithvi@gmail.com>
Move constant from the left side to the right side of the test in a
comparison, where ==, !=, <=, >=, <, > operators are used, fixing the
checkpatch warning: Comparisons should place the constant on the right
side of the test.
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
---
.../staging/rtl8723bs/hal/HalBtc8723b2Ant.c | 4 ++--
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c | 2 +-
drivers/staging/rtl8723bs/hal/hal_com.c | 2 +-
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 4 ++--
.../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 18 +++++++++---------
drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c | 2 +-
drivers/staging/rtl8723bs/include/ieee80211.h | 4 ++--
7 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c b/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
index d32dbf94858f..58f6cf063498 100644
--- a/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
+++ b/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
@@ -2211,7 +2211,7 @@ static void halbtc8723b2ant_RunCoexistMechanism(struct btc_coexist *pBtCoexist)
}
algorithm = halbtc8723b2ant_ActionAlgorithm(pBtCoexist);
- if (pCoexSta->bC2hBtInquiryPage && (BT_8723B_2ANT_COEX_ALGO_PANHS != algorithm)) {
+ if (pCoexSta->bC2hBtInquiryPage && (algorithm != BT_8723B_2ANT_COEX_ALGO_PANHS)) {
halbtc8723b2ant_ActionBtInquiry(pBtCoexist);
return;
} else {
@@ -2490,7 +2490,7 @@ void EXhalbtc8723b2ant_BtInfoNotify(
return;
}
- if (BT_INFO_SRC_8723B_2ANT_WIFI_FW != rspSource) {
+ if (rspSource != BT_INFO_SRC_8723B_2ANT_WIFI_FW) {
pCoexSta->btRetryCnt = pCoexSta->btInfoC2h[rspSource][2] & 0xf; /* [3:0] */
pCoexSta->btRssi = pCoexSta->btInfoC2h[rspSource][3] * 2 + 10;
diff --git a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
index 9df3274c1048..9e7eebfc02a9 100644
--- a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
+++ b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
@@ -313,7 +313,7 @@ static void GetDeltaSwingTable_8723B(
u16 rate = *(pDM_Odm->pForcedDataRate);
u8 channel = pHalData->CurrentChannel;
- if (1 <= channel && channel <= 14) {
+ if (channel >= 1 && channel <= 14) {
if (IS_CCK_RATE(rate)) {
*TemperatureUP_A = pRFCalibrateInfo->DeltaSwingTableIdx_2GCCKA_P;
*TemperatureDOWN_A = pRFCalibrateInfo->DeltaSwingTableIdx_2GCCKA_N;
diff --git a/drivers/staging/rtl8723bs/hal/hal_com.c b/drivers/staging/rtl8723bs/hal/hal_com.c
index 31b3e880ae6a..597ba3d283c1 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com.c
@@ -107,7 +107,7 @@ u8 hal_com_config_channel_plan(
pHalData->bDisableSWChannelPlan = false;
chnlPlan = def_channel_plan;
- if (0xFF == hw_channel_plan)
+ if (hw_channel_plan == 0xFF)
AutoLoadFail = true;
if (!AutoLoadFail) {
diff --git a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
index dc2da49e6738..9e523491a008 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
@@ -462,11 +462,11 @@ u8 PHY_GetTxPowerIndexBase(
if (IS_CCK_RATE(Rate))
txPower = pHalData->Index24G_CCK_Base[RFPath][chnlIdx];
- else if (MGN_6M <= Rate)
+ else if (Rate >= MGN_6M)
txPower = pHalData->Index24G_BW40_Base[RFPath][chnlIdx];
/* OFDM-1T */
- if ((MGN_6M <= Rate && Rate <= MGN_54M) && !IS_CCK_RATE(Rate))
+ if ((Rate >= MGN_6M && Rate <= MGN_54M) && !IS_CCK_RATE(Rate))
txPower += pHalData->OFDM_24G_Diff[RFPath][TX_1S];
if (BandWidth == CHANNEL_WIDTH_20) { /* BW20-1S, BW20-2S */
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 8d259820f103..02c3f4229e74 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -405,11 +405,11 @@ s32 rtl8723b_FirmwareDownload(struct adapter *padapter, bool bUsedWoWLANFw)
break;
}
_FWDownloadEnable(padapter, false);
- if (_SUCCESS != rtStatus)
+ if (rtStatus != _SUCCESS)
goto fwdl_stat;
rtStatus = _FWFreeToGo(padapter, 10, 200);
- if (_SUCCESS != rtStatus)
+ if (rtStatus != _SUCCESS)
goto fwdl_stat;
fwdl_stat:
@@ -1165,15 +1165,15 @@ s32 rtl8723b_InitLLTTable(struct adapter *padapter)
static void hal_get_chnl_group_8723b(u8 channel, u8 *group)
{
- if (1 <= channel && channel <= 2)
+ if (channel >= 1 && channel <= 2)
*group = 0;
- else if (3 <= channel && channel <= 5)
+ else if (channel >= 3 && channel <= 5)
*group = 1;
- else if (6 <= channel && channel <= 8)
+ else if (channel >= 6 && channel <= 8)
*group = 2;
- else if (9 <= channel && channel <= 11)
+ else if (channel >= 9 && channel <= 11)
*group = 3;
- else if (12 <= channel && channel <= 14)
+ else if (channel >= 12 && channel <= 14)
*group = 4;
}
@@ -1221,7 +1221,7 @@ static void Hal_ReadPowerValueFromPROM_8723B(
memset(pwrInfo24G, 0, sizeof(struct TxPowerInfo24G));
- if (0xFF == PROMContent[eeAddr+1])
+ if (PROMContent[eeAddr+1] == 0xFF)
AutoLoadFail = true;
if (AutoLoadFail) {
@@ -2035,7 +2035,7 @@ static void hw_var_set_bcn_func(struct adapter *padapter, u8 variable, u8 *val)
val8 &= ~(EN_BCN_FUNCTION | EN_TXBCN_RPT);
/* Always enable port0 beacon function for PSTDMA */
- if (REG_BCN_CTRL == bcn_ctrl_reg)
+ if (bcn_ctrl_reg == REG_BCN_CTRL)
val8 |= EN_BCN_FUNCTION;
rtw_write8(padapter, bcn_ctrl_reg, val8);
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
index a1f2cbf2cf55..9f6503ac2234 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
@@ -413,7 +413,7 @@ int rtl8723bs_xmit_thread(void *context)
if (signal_pending(current)) {
flush_signals(current);
}
- } while (_SUCCESS == ret);
+ } while (ret == _SUCCESS);
complete(&pxmitpriv->SdioXmitTerminate);
diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index 0f28c904a714..0f378830462f 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -395,8 +395,8 @@ enum {
};
#define IS_HT_RATE(_rate) (_rate >= MGN_MCS0 && _rate <= MGN_MCS31)
-#define IS_CCK_RATE(_rate) (MGN_1M == _rate || _rate == MGN_2M || _rate == MGN_5_5M || _rate == MGN_11M)
-#define IS_OFDM_RATE(_rate) (MGN_6M <= _rate && _rate <= MGN_54M && _rate != MGN_11M)
+#define IS_CCK_RATE(_rate) (_rate == MGN_1M || _rate == MGN_2M || _rate == MGN_5_5M || _rate == MGN_11M)
+#define IS_OFDM_RATE(_rate) (_rate >= MGN_6M && _rate <= MGN_54M && _rate != MGN_11M)
/* NOTE: This data is for statistical purposes; not all hardware provides this
--
2.34.1
next prev parent reply other threads:[~2026-04-05 11:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-05 11:41 [RFT PATCH v3 0/5] staging: rtl8723bs: Code cleanup in drivers/staging/rtl8723bs Prithvi Tambewagh
2026-04-05 11:41 ` Prithvi Tambewagh [this message]
2026-04-05 12:49 ` [RFT PATCH v3 1/5] staging: rtl8723bs: move constant to right side of test in comparison Luka Gejak
2026-04-05 12:51 ` Luka Gejak
2026-04-06 20:45 ` Ethan Tidmore
2026-04-07 4:34 ` Luka Gejak
2026-04-07 4:37 ` Luka Gejak
2026-04-05 11:41 ` [RFT PATCH v3 2/5] staging: rtl8723bs: remove empty if statement block Prithvi Tambewagh
2026-04-05 12:53 ` Luka Gejak
2026-04-05 11:41 ` [RFT PATCH v3 3/5] staging: rtl8723bs: simplify boolean return in IsFrameTypeCtrl() Prithvi Tambewagh
2026-04-05 12:54 ` Luka Gejak
2026-04-05 11:41 ` [RFT PATCH v3 4/5] staging: rtl8723bs: use read_poll_timeout_atomic in _is_fw_read_cmd_down Prithvi Tambewagh
2026-04-05 12:55 ` Luka Gejak
2026-04-05 11:41 ` [RFT PATCH v3 5/5] staging: rtl8723bs: remove duplicate rate checks in PHY_GetTxPowerIndexBase() Prithvi Tambewagh
2026-04-05 12:57 ` Luka Gejak
2026-04-06 20:47 ` Ethan Tidmore
2026-04-05 13:01 ` [RFT PATCH v3 0/5] staging: rtl8723bs: Code cleanup in drivers/staging/rtl8723bs Luka Gejak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260405114132.310774-2-activprithvi@gmail.com \
--to=activprithvi@gmail.com \
--cc=abrahamadekunle50@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=b9788213@gmail.com \
--cc=dan.carpenter@linaro.org \
--cc=david.hunter.linux@gmail.com \
--cc=dharanitharan725@gmail.com \
--cc=ethantidmore06@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=ignacio.pena87@gmail.com \
--cc=karanja99erick@gmail.com \
--cc=khalid@kernel.org \
--cc=knavaneeth786@gmail.com \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=lukagejak5@gmail.com \
--cc=s9430939@naver.com \
--cc=samasth.norway.ananda@oracle.com \
--cc=skhan@linuxfoundation.org \
--cc=straube.linux@gmail.com \
--cc=suunj1331@gmail.com \
--cc=weibu@redadmin.org \
--cc=ysinghcin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox