From: Nikolay Kulikov <nikolayof23@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev, Nikolay Kulikov <nikolayof23@gmail.com>
Subject: [PATCH RFC 08/11] staging: rtl8723bs: inline sdio_write32() into rtw_write32()
Date: Fri, 8 May 2026 22:38:37 +0300 [thread overview]
Message-ID: <20260508193909.16015-9-nikolayof23@gmail.com> (raw)
In-Reply-To: <20260508193909.16015-1-nikolayof23@gmail.com>
rtw_write32() is a wrapper around sdio_write32(), combining them will
simplify the code and reduce the number of indirect calls.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
---
The call sites of rtw_write32() also require _SUCCESS/_FAIL, so we need
to use RTW_STATUS_CODE().
drivers/staging/rtl8723bs/core/rtw_io.c | 32 ++++++++++++++----
drivers/staging/rtl8723bs/hal/sdio_ops.c | 39 ----------------------
drivers/staging/rtl8723bs/include/rtw_io.h | 2 --
3 files changed, 25 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_io.c b/drivers/staging/rtl8723bs/core/rtw_io.c
index 38c4bdd918b8..f1f3ca46bd15 100644
--- a/drivers/staging/rtl8723bs/core/rtw_io.c
+++ b/drivers/staging/rtl8723bs/core/rtw_io.c
@@ -141,16 +141,34 @@ int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
- int ret;
+ struct intf_hdl *intfhdl = &adapter->iopriv.intf;
+ u8 mac_pwr_ctrl_on, device_id, shift;
+ __le32 le_tmp;
+ s32 err = 0;
+ u16 offset;
+ u32 ftaddr;
- _write32 = pintfhdl->io_ops._write32;
+ ftaddr = _cvrt2ftaddr(addr, &device_id, &offset);
- ret = _write32(pintfhdl, addr, val);
+ rtw_hal_get_hwreg(adapter, HW_VAR_APFM_ON_MAC, &mac_pwr_ctrl_on);
+ if (((device_id == WLAN_IOREG_DEVICE_ID) && (offset < 0x100)) ||
+ (!mac_pwr_ctrl_on) ||
+ (adapter_to_pwrctl(adapter)->fw_current_in_ps_mode)) {
+ le_tmp = cpu_to_le32(val);
+ err = sd_cmd52_write(intfhdl, ftaddr, 4, (u8 *)&le_tmp);
+ return RTW_STATUS_CODE(err);
+ }
- return RTW_STATUS_CODE(ret);
+ /* 4 bytes alignment */
+ shift = ftaddr & 0x3;
+ if (shift == 0) {
+ sd_write32(intfhdl, ftaddr, val, &err);
+ } else {
+ le_tmp = cpu_to_le32(val);
+ err = sd_cmd52_write(intfhdl, ftaddr, 4, (u8 *)&le_tmp);
+ }
+
+ return RTW_STATUS_CODE(err);
}
u32 rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
diff --git a/drivers/staging/rtl8723bs/hal/sdio_ops.c b/drivers/staging/rtl8723bs/hal/sdio_ops.c
index b6d0774652dc..a162815e24a4 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_ops.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_ops.c
@@ -124,44 +124,6 @@ u32 _cvrt2ftaddr(const u32 addr, u8 *pdevice_id, u16 *poffset)
return ftaddr;
}
-static s32 sdio_write32(struct intf_hdl *intfhdl, u32 addr, u32 val)
-{
- struct adapter *adapter;
- u8 mac_pwr_ctrl_on;
- u8 device_id;
- u16 offset;
- u32 ftaddr;
- u8 shift;
- s32 err;
- __le32 le_tmp;
-
- adapter = intfhdl->padapter;
- err = 0;
-
- ftaddr = _cvrt2ftaddr(addr, &device_id, &offset);
-
- rtw_hal_get_hwreg(adapter, HW_VAR_APFM_ON_MAC, &mac_pwr_ctrl_on);
- if (
- ((device_id == WLAN_IOREG_DEVICE_ID) && (offset < 0x100)) ||
- (!mac_pwr_ctrl_on) ||
- (adapter_to_pwrctl(adapter)->fw_current_in_ps_mode)
- ) {
- le_tmp = cpu_to_le32(val);
-
- return sd_cmd52_write(intfhdl, ftaddr, 4, (u8 *)&le_tmp);
- }
-
- /* 4 bytes alignment */
- shift = ftaddr & 0x3;
- if (shift == 0) {
- sd_write32(intfhdl, ftaddr, val, &err);
- } else {
- le_tmp = cpu_to_le32(val);
- err = sd_cmd52_write(intfhdl, ftaddr, 4, (u8 *)&le_tmp);
- }
- return err;
-}
-
/*
* Description:
*Read from RX FIFO
@@ -260,7 +222,6 @@ static u32 sdio_write_port(
void sdio_set_intf_ops(struct adapter *adapter, struct _io_ops *ops)
{
- ops->_write32 = &sdio_write32;
ops->_write_port = &sdio_write_port;
}
diff --git a/drivers/staging/rtl8723bs/include/rtw_io.h b/drivers/staging/rtl8723bs/include/rtw_io.h
index db2e00554aff..9fc2f7413543 100644
--- a/drivers/staging/rtl8723bs/include/rtw_io.h
+++ b/drivers/staging/rtl8723bs/include/rtw_io.h
@@ -11,8 +11,6 @@
struct intf_hdl;
struct _io_ops {
- int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
-
u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
};
--
2.54.0
next prev parent reply other threads:[~2026-05-08 19:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 19:38 [PATCH RFC 00/11] staging: rtl8723bs: remove struct _io_ops Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 01/11] staging: rtl8723bs: remove unused sdio_local_read() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 02/11] staging: rtl8723bs: declare helper sdio functions in .h files Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 03/11] staging: rtl8723bs: inline sd_read8() and sdio_read8() into rtw_read8() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 04/11] staging: rtl8723bs: inline sdio_read16() into rtw_read16() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 05/11] staging: rtl8723bs: inline sdio_read32() into rtw_read32() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 06/11] staging: rtl8723bs: inline sd_write8() and sdio_write8() in rtw_write8() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 07/11] staging: rtl8723bs: inline sdio_write16() into rtw_write16() Nikolay Kulikov
2026-05-08 19:38 ` Nikolay Kulikov [this message]
2026-05-08 19:38 ` [PATCH RFC 09/11] staging: rtl8723bs: inline sdio_write_port() into rtw_write_port() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 10/11] staging: rtl8723bs: remove the empty function set_intf_ops() Nikolay Kulikov
2026-05-08 19:38 ` [PATCH RFC 11/11] staging: rtl8723bs: remove empty struct _io_ops Nikolay Kulikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260508193909.16015-9-nikolayof23@gmail.com \
--to=nikolayof23@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox