[PATCH] staging: rtl8723bs: remove unnecessary braces in rtl8723b_hal_init.c

[Atharv Margur <atharvmargur@gmail.com>]

Remove unnecessary braces around single statement blocks
to improve readability and conform to kernel coding style.

No functional changes intended.

Signed-off-by: Atharv Margur <atharvmargur@gmail.com>
---
 .../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 22 +++++++------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index e794fe3ca..14ec258c0 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -197,9 +197,8 @@ static s32 polling_fwdl_chksum(
 		yield();
 	} while (jiffies_to_msecs(jiffies-start) < timeout_ms || cnt < min_cnt);
 
-	if (!(value32 & FWDL_ChkSum_rpt)) {
+	if (!(value32 & FWDL_ChkSum_rpt))
 		goto exit;
-	}
 
 	if (g_fwdl_chksum_fail) {
 		g_fwdl_chksum_fail--;
@@ -238,9 +237,8 @@ static s32 _FWFreeToGo(struct adapter *adapter, u32 min_cnt, u32 timeout_ms)
 		yield();
 	} while (jiffies_to_msecs(jiffies - start) < timeout_ms || cnt < min_cnt);
 
-	if (!(value32 & WINTINI_RDY)) {
+	if (!(value32 & WINTINI_RDY))
 		goto exit;
-	}
 
 	if (g_fwdl_wintint_rdy_fail) {
 		g_fwdl_wintint_rdy_fail--;
@@ -1048,9 +1046,8 @@ void UpdateHalRAMask8723B(struct adapter *padapter, u32 mac_id, u8 rssi_level)
 	rate_bitmap = hal_btcoex_GetRaMask(padapter);
 	mask &= ~rate_bitmap;
 
-	if (pHalData->fw_ractrl) {
+	if (pHalData->fw_ractrl)
 		rtl8723b_set_FwMacIdConfig_cmd(padapter, mac_id, psta->raid, psta->bw_mode, short_gi_rate, mask);
-	}
 
 	/* set correct initial date rate for each mac_id */
 	pdmpriv->INIDATA_RATE[mac_id] = psta->init_rate;
@@ -1621,9 +1618,8 @@ static void rtl8723b_cal_txdesc_chksum(struct tx_desc *ptxdesc)
 	/*  Thomas, Lucas@SD4, 20130515 */
 	count = 16;
 
-	for (index = 0; index < count; index++) {
+	for (index = 0; index < count; index++)
 		checksum |= le16_to_cpu(*(__le16 *)(usPtr + index));
-	}
 
 	ptxdesc->txdw7 |= cpu_to_le32(checksum & 0x0000ffff);
 }
@@ -1892,9 +1888,8 @@ void rtl8723b_fill_fake_txdesc(
 		SET_TX_DESC_HWSEQ_SEL_8723B(pDesc, 0);
 	}
 
-	if (IsBTQosNull) {
+	if (IsBTQosNull)
 		SET_TX_DESC_BT_INT_8723B(pDesc, 1);
-	}
 
 	SET_TX_DESC_USE_RATE_8723B(pDesc, 1); /*  use data rate which is set by Sw */
 	SET_TX_DESC_OWN_8723B((u8 *)pDesc, 1);
@@ -2211,9 +2206,9 @@ void CCX_FwC2HTxRpt_8723b(struct adapter *padapter, u8 *pdata, u8 len)
 #define	GET_8723B_C2H_TX_RPT_LIFE_TIME_OVER(_Header)	LE_BITS_TO_1BYTE((_Header + 0), 6, 1)
 #define	GET_8723B_C2H_TX_RPT_RETRY_OVER(_Header)	LE_BITS_TO_1BYTE((_Header + 0), 7, 1)
 
-	if (GET_8723B_C2H_TX_RPT_RETRY_OVER(pdata) | GET_8723B_C2H_TX_RPT_LIFE_TIME_OVER(pdata)) {
+	if (GET_8723B_C2H_TX_RPT_RETRY_OVER(pdata) | GET_8723B_C2H_TX_RPT_LIFE_TIME_OVER(pdata))
 		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
-	}
+
 /*
 	else if (seq_no != padapter->xmitpriv.seq_no) {
 		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
@@ -2583,9 +2578,8 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
 
 			/*  Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */
 			/*  saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */
-			if (psmode != PS_MODE_ACTIVE) {
+			if (psmode != PS_MODE_ACTIVE)
 				ODM_RF_Saving(&pHalData->odmpriv, true);
-			}
 
 			/* if (psmode != PS_MODE_ACTIVE)	{ */
 			/* 	rtl8723b_set_lowpwr_lps_cmd(padapter, true); */
-- 
2.53.0