[PATCH 3/8] media: intel: ipu-bridge: Add Yoga Book camera sensors

[Maurizio Casciano <mauriziocasciano7@gmail.com>]

The Yoga Book YB1-X91 uses INT3477 for its OV8858 rear sensor and
OVTI2740 for its OV2740 front sensor. Add link frequencies consumed by
the sensor drivers when the IPU bridge constructs software endpoints.

This supplies endpoint data only; it does not establish that either
sensor can stream on the Yoga Book hardware.

Signed-off-by: Maurizio Casciano <mauriziocasciano7@gmail.com>
Assisted-by: Codex:gpt-5.6-sol sparse
---
 drivers/media/pci/intel/ipu-bridge.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 1bb3a3e98d6b..47317c423fad 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -65,6 +65,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("INT33F0", 1, 384000000),
 	/* Omnivision OV2740 */
 	IPU_SENSOR_CONFIG("INT3474", 1, 180000000),
+	/* Omnivision OV8858 */
+	IPU_SENSOR_CONFIG("INT3477", 1, 360000000),
 	/* Omnivision OV5670 */
 	IPU_SENSOR_CONFIG("INT3479", 1, 422400000),
 	/* Omnivision OV8865 */
@@ -93,6 +95,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("OVTIDB10", 1, 560000000),
 	/* Omnivision OV2680 */
 	IPU_SENSOR_CONFIG("OVTI2680", 1, 331200000),
+	/* Omnivision OV2740 */
+	IPU_SENSOR_CONFIG("OVTI2740", 1, 360000000),
 	/* Omnivision OV5675 */
 	IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
 	/* Omnivision OV8856 */
-- 
2.53.0