From: Michael Straube <straube.linux@gmail.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
martin@kaiser.cx, fmdefrancesco@gmail.com,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] staging: r8188eu: remove unused defines from odm_RegDefine11N.h
Date: Sat, 18 Sep 2021 16:42:48 +0200 [thread overview]
Message-ID: <7907c680-e3fd-3dd9-983b-dcd2275cdedb@gmail.com> (raw)
In-Reply-To: <YUX2mNXLzqJXmer4@kroah.com>
On 9/18/21 16:24, Greg KH wrote:
> On Sat, Sep 18, 2021 at 10:11:19AM +0200, Michael Straube wrote:
>> Remove unused defines from odm_RegDefine11N.h.
>>
>> Signed-off-by: Michael Straube <straube.linux@gmail.com>
>> ---
>> .../r8188eu/include/odm_RegDefine11N.h | 96 -------------------
>> 1 file changed, 96 deletions(-)
>>
>> diff --git a/drivers/staging/r8188eu/include/odm_RegDefine11N.h b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
>> index 5d1d73490c1c..3e2fd6b1c793 100644
>> --- a/drivers/staging/r8188eu/include/odm_RegDefine11N.h
>> +++ b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
>> @@ -4,56 +4,20 @@
>> #ifndef __ODM_REGDEFINE11N_H__
>> #define __ODM_REGDEFINE11N_H__
>>
>> -/* 2 RF REG LIST */
>> -#define ODM_REG_RF_MODE_11N 0x00
>> -#define ODM_REG_RF_0B_11N 0x0B
>> -#define ODM_REG_CHNBW_11N 0x18
>> -#define ODM_REG_T_METER_11N 0x24
>> -#define ODM_REG_RF_25_11N 0x25
>> -#define ODM_REG_RF_26_11N 0x26
>> -#define ODM_REG_RF_27_11N 0x27
>> -#define ODM_REG_RF_2B_11N 0x2B
>> -#define ODM_REG_RF_2C_11N 0x2C
>> -#define ODM_REG_RXRF_A3_11N 0x3C
>> -#define ODM_REG_T_METER_92D_11N 0x42
>> -#define ODM_REG_T_METER_88E_11N 0x42
>> -
>> /* 2 BB REG LIST */
>> /* PAGE 8 */
>> -#define ODM_REG_BB_CTRL_11N 0x800
>> -#define ODM_REG_RF_PIN_11N 0x804
>> -#define ODM_REG_PSD_CTRL_11N 0x808
>> #define ODM_REG_TX_ANT_CTRL_11N 0x80C
>> -#define ODM_REG_BB_PWR_SAV5_11N 0x818
>> -#define ODM_REG_CCK_RPT_FORMAT_11N 0x824
>> #define ODM_REG_RX_DEFUALT_A_11N 0x858
>> -#define ODM_REG_RX_DEFUALT_B_11N 0x85A
>> -#define ODM_REG_BB_PWR_SAV3_11N 0x85C
>> #define ODM_REG_ANTSEL_CTRL_11N 0x860
>> #define ODM_REG_RX_ANT_CTRL_11N 0x864
>> #define ODM_REG_PIN_CTRL_11N 0x870
>> -#define ODM_REG_BB_PWR_SAV1_11N 0x874
>> -#define ODM_REG_ANTSEL_PATH_11N 0x878
>> -#define ODM_REG_BB_3WIRE_11N 0x88C
>> #define ODM_REG_SC_CNT_11N 0x8C4
>> -#define ODM_REG_PSD_DATA_11N 0x8B4
>> /* PAGE 9 */
>> #define ODM_REG_ANT_MAPPING1_11N 0x914
>> -#define ODM_REG_ANT_MAPPING2_11N 0x918
>> /* PAGE A */
>> #define ODM_REG_CCK_ANTDIV_PARA1_11N 0xA00
>> #define ODM_REG_CCK_CCA_11N 0xA0A
>> #define ODM_REG_CCK_ANTDIV_PARA2_11N 0xA0C
>> -#define ODM_REG_CCK_ANTDIV_PARA3_11N 0xA10
>> -#define ODM_REG_CCK_ANTDIV_PARA4_11N 0xA14
>> -#define ODM_REG_CCK_FILTER_PARA1_11N 0xA22
>> -#define ODM_REG_CCK_FILTER_PARA2_11N 0xA23
>> -#define ODM_REG_CCK_FILTER_PARA3_11N 0xA24
>> -#define ODM_REG_CCK_FILTER_PARA4_11N 0xA25
>> -#define ODM_REG_CCK_FILTER_PARA5_11N 0xA26
>> -#define ODM_REG_CCK_FILTER_PARA6_11N 0xA27
>> -#define ODM_REG_CCK_FILTER_PARA7_11N 0xA28
>> -#define ODM_REG_CCK_FILTER_PARA8_11N 0xA29
>> #define ODM_REG_CCK_FA_RST_11N 0xA2C
>> #define ODM_REG_CCK_FA_MSB_11N 0xA58
>> #define ODM_REG_CCK_FA_LSB_11N 0xA5C
>> @@ -61,28 +25,10 @@
>> #define ODM_REG_BB_PWR_SAV4_11N 0xA74
>> /* PAGE B */
>> #define ODM_REG_LNA_SWITCH_11N 0xB2C
>> -#define ODM_REG_PATH_SWITCH_11N 0xB30
>> -#define ODM_REG_RSSI_CTRL_11N 0xB38
>> -#define ODM_REG_CONFIG_ANTA_11N 0xB68
>> -#define ODM_REG_RSSI_BT_11N 0xB9C
>> /* PAGE C */
>> #define ODM_REG_OFDM_FA_HOLDC_11N 0xC00
>> -#define ODM_REG_RX_PATH_11N 0xC04
>> -#define ODM_REG_TRMUX_11N 0xC08
>> #define ODM_REG_OFDM_FA_RSTC_11N 0xC0C
>> -#define ODM_REG_RXIQI_MATRIX_11N 0xC14
>> -#define ODM_REG_TXIQK_MATRIX_LSB1_11N 0xC4C
>> #define ODM_REG_IGI_A_11N 0xC50
>> -#define ODM_REG_ANTDIV_PARA2_11N 0xC54
>> -#define ODM_REG_IGI_B_11N 0xC58
>> -#define ODM_REG_ANTDIV_PARA3_11N 0xC5C
>> -#define ODM_REG_BB_PWR_SAV2_11N 0xC70
>> -#define ODM_REG_RX_OFF_11N 0xC7C
>> -#define ODM_REG_TXIQK_MATRIXA_11N 0xC80
>> -#define ODM_REG_TXIQK_MATRIXB_11N 0xC88
>> -#define ODM_REG_TXIQK_MATRIXA_LSB2_11N 0xC94
>> -#define ODM_REG_TXIQK_MATRIXB_LSB2_11N 0xC9C
>> -#define ODM_REG_RXIQK_MATRIX_LSB_11N 0xCA0
>> #define ODM_REG_ANTDIV_PARA1_11N 0xCA4
>> #define ODM_REG_OFDM_FA_TYPE1_11N 0xCF0
>> /* PAGE D */
>> @@ -90,52 +36,10 @@
>> #define ODM_REG_OFDM_FA_TYPE2_11N 0xDA0
>> #define ODM_REG_OFDM_FA_TYPE3_11N 0xDA4
>> #define ODM_REG_OFDM_FA_TYPE4_11N 0xDA8
>> -/* PAGE E */
>> -#define ODM_REG_TXAGC_A_6_18_11N 0xE00
>> -#define ODM_REG_TXAGC_A_24_54_11N 0xE04
>> -#define ODM_REG_TXAGC_A_1_MCS32_11N 0xE08
>> -#define ODM_REG_TXAGC_A_MCS0_3_11N 0xE10
>> -#define ODM_REG_TXAGC_A_MCS4_7_11N 0xE14
>> -#define ODM_REG_TXAGC_A_MCS8_11_11N 0xE18
>> -#define ODM_REG_TXAGC_A_MCS12_15_11N 0xE1C
>> -#define ODM_REG_FPGA0_IQK_11N 0xE28
>> -#define ODM_REG_TXIQK_TONE_A_11N 0xE30
>> -#define ODM_REG_RXIQK_TONE_A_11N 0xE34
>> -#define ODM_REG_TXIQK_PI_A_11N 0xE38
>> -#define ODM_REG_RXIQK_PI_A_11N 0xE3C
>> -#define ODM_REG_TXIQK_11N 0xE40
>> -#define ODM_REG_RXIQK_11N 0xE44
>> -#define ODM_REG_IQK_AGC_PTS_11N 0xE48
>> -#define ODM_REG_IQK_AGC_RSP_11N 0xE4C
>> -#define ODM_REG_BLUETOOTH_11N 0xE6C
>> -#define ODM_REG_RX_WAIT_CCA_11N 0xE70
>> -#define ODM_REG_TX_CCK_RFON_11N 0xE74
>> -#define ODM_REG_TX_CCK_BBON_11N 0xE78
>> -#define ODM_REG_OFDM_RFON_11N 0xE7C
>> -#define ODM_REG_OFDM_BBON_11N 0xE80
>> -#define ODM_REG_TX2RX_11N 0xE84
>> -#define ODM_REG_TX2TX_11N 0xE88
>> -#define ODM_REG_RX_CCK_11N 0xE8C
>> -#define ODM_REG_RX_OFDM_11N 0xED0
>> -#define ODM_REG_RX_WAIT_RIFS_11N 0xED4
>> -#define ODM_REG_RX2RX_11N 0xED8
>> -#define ODM_REG_STANDBY_11N 0xEDC
>> -#define ODM_REG_SLEEP_11N 0xEE0
>> -#define ODM_REG_PMPD_ANAEN_11N 0xEEC
>>
>> /* 2 MAC REG LIST */
>> -#define ODM_REG_BB_RST_11N 0x02
>> #define ODM_REG_ANTSEL_PIN_11N 0x4C
>> -#define ODM_REG_EARLY_MODE_11N 0x4D0
>> -#define ODM_REG_RSSI_MONITOR_11N 0x4FE
>> -#define ODM_REG_EDCA_VO_11N 0x500
>> -#define ODM_REG_EDCA_VI_11N 0x504
>> -#define ODM_REG_EDCA_BE_11N 0x508
>> -#define ODM_REG_EDCA_BK_11N 0x50C
>> -#define ODM_REG_TXPAUSE_11N 0x522
>> #define ODM_REG_RESP_TX_11N 0x6D8
>> -#define ODM_REG_ANT_TRAIN_PARA1_11N 0x7b0
>> -#define ODM_REG_ANT_TRAIN_PARA2_11N 0x7b4
>>
>> /* DIG Related */
>> #define ODM_BIT_IGI_11N 0x0000007F
>> --
>> 2.33.0
>>
>>
>
> I get the following build error after applying this series:
>
> In file included from drivers/staging/r8188eu/hal/../include/odm_precomp.h:28,
> from drivers/staging/r8188eu/hal/odm.c:6:
> drivers/staging/r8188eu/hal/odm.c: In function ‘ODM_Write_DIG’:
> drivers/staging/r8188eu/hal/../include/odm_interface.h:30:41: error: ‘ODM_REG_IGI_B_11N’ undeclared (first use in this function); did you mean ‘ODM_REG_IGI_A_11N’?
> 30 | #define _reg_11N(_name) ODM_REG_##_name##_11N
> | ^~~~~~~~
> drivers/staging/r8188eu/hal/../include/odm_interface.h:37:52: note: in expansion of macro ‘_reg_11N’
> 37 | ((_ic_type) & ODM_IC_11N_SERIES) ? _func##_11N(_name) : \
> | ^~~~~
> drivers/staging/r8188eu/hal/../include/odm_interface.h:45:34: note: in expansion of macro ‘_cat’
> 45 | #define ODM_REG(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _reg)
> | ^~~~
> drivers/staging/r8188eu/hal/odm.c:486:55: note: in expansion of macro ‘ODM_REG’
> 486 | ODM_SetBBReg(pDM_Odm, ODM_REG(IGI_B, pDM_Odm), ODM_BIT(IGI, pDM_Odm), CurrentIGI);
> | ^~~~~~~
> drivers/staging/r8188eu/hal/../include/odm_interface.h:30:41: note: each undeclared identifier is reported only once for each function it appears in
> 30 | #define _reg_11N(_name) ODM_REG_##_name##_11N
> | ^~~~~~~~
> drivers/staging/r8188eu/hal/../include/odm_interface.h:37:52: note: in expansion of macro ‘_reg_11N’
> 37 | ((_ic_type) & ODM_IC_11N_SERIES) ? _func##_11N(_name) : \
> | ^~~~~
> drivers/staging/r8188eu/hal/../include/odm_interface.h:45:34: note: in expansion of macro ‘_cat’
> 45 | #define ODM_REG(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _reg)
> | ^~~~
> drivers/staging/r8188eu/hal/odm.c:486:55: note: in expansion of macro ‘ODM_REG’
> 486 | ODM_SetBBReg(pDM_Odm, ODM_REG(IGI_B, pDM_Odm), ODM_BIT(IGI, pDM_Odm), CurrentIGI);
> | ^~~~~~~
> make[3]: *** [scripts/Makefile.build:277: drivers/staging/r8188eu/hal/odm.o] Error 1
>
>
>
> Looks like these defines are used :(
>
> How did you test this?
>
> greg k-h
>
Hi Greg.
Ah, I'm sorry, this patch (and 2/2) dependeds on the patchset
[PATCH v2 00/12] staging: r8188eu: remove odm_RegDefine11AC.h
which, I guess, is below this patch in your review list?
Somehow I did not notice this dependency. :(
Should I send a v2?
Regards,
Michael
next prev parent reply other threads:[~2021-09-18 14:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-18 8:11 [PATCH 1/2] staging: r8188eu: remove unused defines from odm_RegDefine11N.h Michael Straube
2021-09-18 8:11 ` [PATCH 2/2] staging: r8188eu: clean up indentation in odm_RegDefine11N.h Michael Straube
2021-09-18 14:24 ` [PATCH 1/2] staging: r8188eu: remove unused defines from odm_RegDefine11N.h Greg KH
2021-09-18 14:42 ` Michael Straube [this message]
2021-09-18 14:59 ` Greg KH
2021-09-18 15:05 ` Michael Straube
2021-09-18 14:49 ` Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7907c680-e3fd-3dd9-983b-dcd2275cdedb@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox