From: Jacob Bai <jacob.bai.au@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: pi433: change (struct pi433_tx_cfg)->bit_rate to be a u32
Date: Tue, 14 Feb 2023 17:33:46 +1100 [thread overview]
Message-ID: <Y+srSuTdGmzmXG1I@jacob-Ubuntu> (raw)
Based on the TODO file and datasheet of pi433, the maximum bit rate for
transmitter is 300kbps when modulation been set to FSK. Hence, the size
should be u32 rather than u16.
Signed-off-by: Jacob Bai <jacob.bai.au@gmail.com>
---
drivers/staging/pi433/Documentation/pi433.txt | 3 ++-
drivers/staging/pi433/pi433_if.h | 2 +-
drivers/staging/pi433/rf69.c | 4 ++--
drivers/staging/pi433/rf69.h | 2 +-
4 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/pi433/Documentation/pi433.txt b/drivers/staging/pi433/Documentation/pi433.txt
index 4a0d34b4ad37..b34d8e9f6d53 100644
--- a/drivers/staging/pi433/Documentation/pi433.txt
+++ b/drivers/staging/pi433/Documentation/pi433.txt
@@ -78,7 +78,8 @@ rf params:
Allowed values: 433050000...434790000
bit_rate
bit rate used for transmission.
- Allowed values: #####
+ Allowed values when FSK: 1200...300000
+ Allowed values when OOK: 1200...32768
dev_frequency
frequency deviation in case of FSK.
Allowed values: 600...500000
diff --git a/drivers/staging/pi433/pi433_if.h b/drivers/staging/pi433/pi433_if.h
index 25ee0b77a32c..1f8ffaf02d99 100644
--- a/drivers/staging/pi433/pi433_if.h
+++ b/drivers/staging/pi433/pi433_if.h
@@ -51,7 +51,7 @@ enum option_on_off {
#define PI433_TX_CFG_IOCTL_NR 0
struct pi433_tx_cfg {
__u32 frequency;
- __u16 bit_rate;
+ __u32 bit_rate;
__u32 dev_frequency;
enum modulation modulation;
enum mod_shaping mod_shaping;
diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
index 8c7fab6a46bb..0b90ca004dd6 100644
--- a/drivers/staging/pi433/rf69.c
+++ b/drivers/staging/pi433/rf69.c
@@ -185,7 +185,7 @@ int rf69_set_modulation_shaping(struct spi_device *spi,
}
}
-int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate)
+int rf69_set_bit_rate(struct spi_device *spi, u32 bit_rate)
{
int retval;
u32 bit_rate_reg;
@@ -201,7 +201,7 @@ int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate)
}
// check input value
- if (bit_rate < 1200 || (mod == OOK && bit_rate > 32768)) {
+ if (bit_rate < 1200 || bit_rate > 300000 || (mod == OOK && bit_rate > 32768)) {
dev_dbg(&spi->dev, "setBitRate: illegal input param\n");
return -EINVAL;
}
diff --git a/drivers/staging/pi433/rf69.h b/drivers/staging/pi433/rf69.h
index 78fa0b8bab8b..46a1fb2d5329 100644
--- a/drivers/staging/pi433/rf69.h
+++ b/drivers/staging/pi433/rf69.h
@@ -24,7 +24,7 @@ int rf69_set_data_mode(struct spi_device *spi, u8 data_mode);
int rf69_set_modulation(struct spi_device *spi, enum modulation modulation);
int rf69_set_modulation_shaping(struct spi_device *spi,
enum mod_shaping mod_shaping);
-int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate);
+int rf69_set_bit_rate(struct spi_device *spi, u32 bit_rate);
int rf69_set_deviation(struct spi_device *spi, u32 deviation);
int rf69_set_frequency(struct spi_device *spi, u32 frequency);
int rf69_enable_amplifier(struct spi_device *spi, u8 amplifier_mask);
--
2.34.1
next reply other threads:[~2023-02-14 6:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-14 6:33 Jacob Bai [this message]
2023-02-14 8:25 ` [PATCH] staging: pi433: change (struct pi433_tx_cfg)->bit_rate to be a u32 Dan Carpenter
[not found] ` <Y+s/HP+v7lx2SKRj@ubun2204.myguest.virtualbox.org>
2023-02-14 9:24 ` Jacob Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y+srSuTdGmzmXG1I@jacob-Ubuntu \
--to=jacob.bai.au@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox