public inbox for linux-staging@lists.linux.dev
 help / color / mirror / Atom feed
From: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	kernel@collabora.com,
	Sebastian Fricke <sebastian.fricke@collabora.com>,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 13/23] media: rkvdec: h264: Fix dpb_valid implementation
Date: Sat, 2 Apr 2022 08:16:43 -0300	[thread overview]
Message-ID: <YkgwmwTMa83RysKB@eze-laptop> (raw)
In-Reply-To: <20220331193726.289559-14-nicolas.dufresne@collabora.com>

On Thu, Mar 31, 2022 at 03:37:15PM -0400, Nicolas Dufresne wrote:
> The ref builder only provided references that are marked as valid in the
> dpb. Thus the current implementation of dpb_valid would always set the
> flag to 1. This is not representing missing frames (this is called
> 'non-existing' pictures in the spec). In some context, these non-existing
> pictures still need to occupy a slot in the reference list according to
> the spec.
> 

Good catch! OOC, did you find this because it was failing a test vector?

> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

Thanks,
Ezequiel

> ---
>  drivers/staging/media/rkvdec/rkvdec-h264.c | 33 ++++++++++++++++------
>  1 file changed, 24 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> index dff89732ddd0..bcde37d72244 100644
> --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> @@ -112,6 +112,7 @@ struct rkvdec_h264_run {
>  	const struct v4l2_ctrl_h264_sps *sps;
>  	const struct v4l2_ctrl_h264_pps *pps;
>  	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
> +	int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
>  };
>  
>  struct rkvdec_h264_ctx {
> @@ -725,6 +726,26 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
>  	}
>  }
>  
> +static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
> +			       struct rkvdec_h264_run *run)
> +{
> +	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
> +		struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> +		const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
> +		struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> +		int buf_idx = -1;
> +
> +		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
> +			buf_idx = vb2_find_timestamp(cap_q,
> +						     dpb[i].reference_ts, 0);
> +
> +		run->ref_buf_idx[i] = buf_idx;
> +	}
> +}
> +
>  static void assemble_hw_rps(struct rkvdec_ctx *ctx,
>  			    struct rkvdec_h264_run *run)
>  {
> @@ -762,7 +783,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
>  
>  	for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
>  		for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
> -			u8 dpb_valid = 0;
> +			bool dpb_valid = run->ref_buf_idx[i] >= 0;
>  			u8 idx = 0;
>  
>  			switch (j) {
> @@ -779,8 +800,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
>  
>  			if (idx >= ARRAY_SIZE(dec_params->dpb))
>  				continue;
> -			dpb_valid = !!(dpb[idx].flags &
> -				       V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);
>  
>  			set_ps_field(hw_rps, DPB_INFO(i, j),
>  				     idx | dpb_valid << 4);
> @@ -859,13 +878,8 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
>  	    unsigned int dpb_idx)
>  {
>  	struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> -	const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
>  	struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> -	int buf_idx = -1;
> -
> -	if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
> -		buf_idx = vb2_find_timestamp(cap_q,
> -					     dpb[dpb_idx].reference_ts, 0);
> +	int buf_idx = run->ref_buf_idx[dpb_idx];
>  
>  	/*
>  	 * If a DPB entry is unused or invalid, address of current destination
> @@ -1102,6 +1116,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
>  
>  	assemble_hw_scaling_list(ctx, &run);
>  	assemble_hw_pps(ctx, &run);
> +	lookup_ref_buf_idx(ctx, &run);
>  	assemble_hw_rps(ctx, &run);
>  	config_registers(ctx, &run);
>  
> -- 
> 2.34.1
> 

  reply	other threads:[~2022-04-02 11:16 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220331193726.289559-1-nicolas.dufresne@collabora.com>
2022-03-31 19:37 ` [PATCH v2 05/23] media: h264: Use v4l2_h264_reference for reflist Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 06/23] media: h264: Increase reference lists size to 32 Nicolas Dufresne
2022-04-02 12:03   ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 12/23] media: rkvdec: Stop overclocking the decoder Nicolas Dufresne
2022-04-02 11:05   ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 13/23] media: rkvdec: h264: Fix dpb_valid implementation Nicolas Dufresne
2022-04-02 11:16   ` Ezequiel Garcia [this message]
2022-04-05 15:10     ` Nicolas Dufresne
2022-04-05 15:34       ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 14/23] media: rkvdec: h264: Fix bit depth wrap in pps packet Nicolas Dufresne
2022-04-02 11:20   ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 15/23] media: rkvdec: h264: Validate and use pic width and height in mbs Nicolas Dufresne
2022-04-02 11:32   ` Ezequiel Garcia
2022-04-05 15:44     ` Nicolas Dufresne
2022-04-05 16:04       ` Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 16/23] media: rkvdec: h264: Fix reference frame_num wrap for second field Nicolas Dufresne
2022-04-02 11:33   ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 17/23] media: rkvdec: Enable capture buffer holding for H264 Nicolas Dufresne
2022-04-02 11:35   ` Ezequiel Garcia
2022-03-31 19:37 ` [PATCH v2 18/23] media: rkvdec: Ensure decoded resolution fit coded resolution Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 19/23] media: rkvdec-h264: Add field decoding support Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 20/23] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 21/23] media: hantro: Stop using H.264 parameter pic_num Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 22/23] media: hantro: h264: Make dpb entry management more robust Nicolas Dufresne
2022-03-31 19:37 ` [PATCH v2 23/23] media: hantro: Add H.264 field decoding support Nicolas Dufresne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YkgwmwTMa83RysKB@eze-laptop \
    --to=ezequiel@vanguardiasur.com.ar \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=sebastian.fricke@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox