Re: [PATCH v4 03/11] media: rkvdec: h264: Use bytesperline and buffer height as virstride

[Nicolas Dufresne <nicolas.dufresne@collabora.com>]

Le dimanche 05 novembre 2023 à 16:55 +0000, Jonas Karlman a écrit :
> Use bytesperline and buffer height to calculate the strides configured.
> 
> This does not really change anything other than ensuring the
> bytesperline that is signaled to userspace matches what is configured
> in HW.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>

Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>

> ---
> v4:
> - No change
> 
> v3:
> - Remove unnecessary yuv_virstride +=
> 
>  drivers/staging/media/rkvdec/rkvdec-h264.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> index 4fc167b42cf0..7a1e76d423df 100644
> --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> @@ -896,9 +896,9 @@ static void config_registers(struct rkvdec_ctx *ctx,
>  	dma_addr_t rlc_addr;
>  	dma_addr_t refer_addr;
>  	u32 rlc_len;
> -	u32 hor_virstride = 0;
> -	u32 ver_virstride = 0;
> -	u32 y_virstride = 0;
> +	u32 hor_virstride;
> +	u32 ver_virstride;
> +	u32 y_virstride;
>  	u32 yuv_virstride = 0;
>  	u32 offset;
>  	dma_addr_t dst_addr;
> @@ -909,16 +909,16 @@ static void config_registers(struct rkvdec_ctx *ctx,
>  
>  	f = &ctx->decoded_fmt;
>  	dst_fmt = &f->fmt.pix_mp;
> -	hor_virstride = (sps->bit_depth_luma_minus8 + 8) * dst_fmt->width / 8;
> -	ver_virstride = round_up(dst_fmt->height, 16);
> +	hor_virstride = dst_fmt->plane_fmt[0].bytesperline;
> +	ver_virstride = dst_fmt->height;
>  	y_virstride = hor_virstride * ver_virstride;
>  
>  	if (sps->chroma_format_idc == 0)
>  		yuv_virstride = y_virstride;
>  	else if (sps->chroma_format_idc == 1)
> -		yuv_virstride += y_virstride + y_virstride / 2;
> +		yuv_virstride = y_virstride + y_virstride / 2;
>  	else if (sps->chroma_format_idc == 2)
> -		yuv_virstride += 2 * y_virstride;
> +		yuv_virstride = 2 * y_virstride;
>  
>  	reg = RKVDEC_Y_HOR_VIRSTRIDE(hor_virstride / 16) |
>  	      RKVDEC_UV_HOR_VIRSTRIDE(hor_virstride / 16) |