Re: [PATCH v3 0/2] arm: dts: sunxi: Add ICnova A20 ADB4006 board support

[Ludwig Kormann <ludwig.kormann@in-circuit.de>]

Hello,

thanks for the reviews so far!

Is there anything I can do / need to do for my patch series for it to 
get merged before -rc1?

The patch series was based on the "for-next" branch in jernej's tree, 
but it seems that it was too late for the "dt-for-6.4" merge.

So I'm just trying to understand in general what the best way in this 
situation would be:
- wait if someone else takes the patch series before -rc1
- wait for -rc1 and rebase, rework, send a new version of the patch 
series (because of the planned restructuring of the ARM dts directory)
- wait for -rc3 (?) and rebase & rework the patch series for jernej's 
tree for the "dt-for-6.5" branch

Thanks for your help.

kind regards
Ludwig Kormann


Am 20.04.23 um 12:24 schrieb Ludwig Kormann:
> Add board support for ICnova A20 SomPi compute module on
> ICnova ADB4006 development board.
>
> v3:
> - drop stray blank lines at end of files
> - separate patch for bindings
> - update licensing to "GPL-2.0 OR MIT"
> - fix typo: ICNova -> ICnova
>
> v2:
> - use short licensing header
> - remove deprecated elements from led nodes
> - disable csi power supply
> - add missing pins in usbphy node
> - split dts into SoM dtsi and carrier board dts
>
> v1 of this patch was sent to the uboot mailing list [1].
>
> [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html
>
> Ludwig Kormann (2):
>    dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding
>    arm: dts: sunxi: Add ICnova A20 ADB4006 board
>
>   .../devicetree/bindings/arm/sunxi.yaml        |   6 +
>   arch/arm/boot/dts/Makefile                    |   1 +
>   .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++
>   arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi   |  62 ++++++++
>   4 files changed, 206 insertions(+)
>   create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>   create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>