From: Dmitry Osipenko <dmitry.osipenko@collabora.com>
To: Maxime Ripard <mripard@kernel.org>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>
Cc: linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
kernel@collabora.com
Subject: [PATCH v1] media: cedrus: Propagate error code from cedrus_h265_skip_bits()
Date: Wed, 14 Sep 2022 18:01:05 +0300 [thread overview]
Message-ID: <20220914150105.209484-1-dmitry.osipenko@collabora.com> (raw)
The cedrus_h265_skip_bits() may get into infinite loop if decoding
parameters are incorrect. In this case we detect the loop and print
a error message, continuing the decoding that is fated to fail.
Will be cleaner to abort the decoding early. Propagate the error code
to cedrus_device_run() and reset hardware on the cedrus_h265_skip_bits()
failure.
Suggested-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
---
drivers/staging/media/sunxi/cedrus/cedrus_dec.c | 2 ++
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 15 ++++++++++++---
drivers/staging/media/sunxi/cedrus/cedrus_hw.c | 7 ++++++-
drivers/staging/media/sunxi/cedrus/cedrus_hw.h | 2 ++
4 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
index e7f7602a5ab4..ae5df3dc01c0 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
@@ -112,6 +112,8 @@ void cedrus_device_run(void *priv)
dev->dec_ops[ctx->current_codec]->trigger(ctx);
} else {
+ cedrus_hw_reset(dev);
+
v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev,
ctx->fh.m2m_ctx,
VB2_BUF_STATE_ERROR);
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index 4952fc17f3e6..f409f59452d8 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -224,9 +224,10 @@ static void cedrus_h265_pred_weight_write(struct cedrus_dev *dev,
}
}
-static void cedrus_h265_skip_bits(struct cedrus_dev *dev, int num)
+static int cedrus_h265_skip_bits(struct cedrus_dev *dev, int num)
{
int count = 0;
+ int err;
while (count < num) {
int tmp = min(num - count, 32);
@@ -235,11 +236,16 @@ static void cedrus_h265_skip_bits(struct cedrus_dev *dev, int num)
VE_DEC_H265_TRIGGER_FLUSH_BITS |
VE_DEC_H265_TRIGGER_TYPE_N_BITS(tmp));
- if (cedrus_wait_for(dev, VE_DEC_H265_STATUS, VE_DEC_H265_STATUS_VLD_BUSY))
+ err = cedrus_wait_for(dev, VE_DEC_H265_STATUS, VE_DEC_H265_STATUS_VLD_BUSY);
+ if (err) {
dev_err_ratelimited(dev->dev, "timed out waiting to skip bits\n");
+ return err;
+ }
count += tmp;
}
+
+ return 0;
}
static void cedrus_h265_write_scaling_list(struct cedrus_ctx *ctx,
@@ -408,6 +414,7 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
u32 pic_order_cnt[2];
u8 *padding;
int count;
+ int err;
u32 reg;
sps = run->h265.sps;
@@ -534,7 +541,9 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
/* Include the one bit. */
count++;
- cedrus_h265_skip_bits(dev, slice_params->data_byte_offset * 8 - count);
+ err = cedrus_h265_skip_bits(dev, slice_params->data_byte_offset * 8 - count);
+ if (err)
+ return err;
/* Bitstream parameters. */
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c
index a6470a89851e..e9ceca332062 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c
@@ -168,11 +168,16 @@ void cedrus_watchdog(struct work_struct *work)
VB2_BUF_STATE_ERROR);
}
+void cedrus_hw_reset(struct cedrus_dev *dev)
+{
+ reset_control_reset(dev->rstc);
+}
+
int cedrus_hw_suspend(struct device *device)
{
struct cedrus_dev *dev = dev_get_drvdata(device);
- reset_control_assert(dev->rstc);
+ cedrus_hw_reset(dev);
clk_disable_unprepare(dev->ram_clk);
clk_disable_unprepare(dev->mod_clk);
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_hw.h b/drivers/staging/media/sunxi/cedrus/cedrus_hw.h
index 7c92f00e36da..919c4475f0d7 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_hw.h
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_hw.h
@@ -30,4 +30,6 @@ void cedrus_hw_remove(struct cedrus_dev *dev);
void cedrus_watchdog(struct work_struct *work);
+void cedrus_hw_reset(struct cedrus_dev *dev);
+
#endif
--
2.37.3
next reply other threads:[~2022-09-14 15:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 15:01 Dmitry Osipenko [this message]
2022-10-24 11:38 ` [PATCH v1] media: cedrus: Propagate error code from cedrus_h265_skip_bits() Hans Verkuil
2022-10-25 4:59 ` Jernej Škrabec
2022-10-25 9:34 ` Dmitry Osipenko
2022-10-25 10:23 ` Hans Verkuil
2022-10-25 10:36 ` Dmitry Osipenko
2022-10-25 10:41 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914150105.209484-1-dmitry.osipenko@collabora.com \
--to=dmitry.osipenko@collabora.com \
--cc=jernej.skrabec@gmail.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=paul.kocialkowski@bootlin.com \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox