From: Andre Przywara <andre.przywara@arm.com>
To: Tom Rini <trini@konsulko.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Samuel Holland <samuel@sholland.org>,
Maksim Kiselev <bigunclemax@gmail.com>,
Nick Alilovic <nickalilovic@gmail.com>,
Chuanhong Guo <gch981213@gmail.com>,
linux-sunxi@lists.linux.dev, u-boot@lists.denx.de
Subject: Re: Pull request: u-boot-sunxi/master for v2024.04
Date: Mon, 29 Jan 2024 17:24:49 +0000 [thread overview]
Message-ID: <20240129172449.0b9ebc9f@donnerap.manchester.arm.com> (raw)
In-Reply-To: <20240129155543.2439451-1-andre.przywara@arm.com>
On Mon, 29 Jan 2024 15:55:43 +0000
Andre Przywara <andre.przywara@arm.com> wrote:
Hi Tom,
> please pull the sunxi/master branch, containing the first part of the
I just saw that the CI pipeline failed on missing maintainer entries for
the two new boards. Is that a showstopper for you? Shall I update the
branch, or would a follow-up patch be sufficient?
Cheers,
Andre
> 2024.04 changes. I had some more (USB regulator) changes queued, but
> found regressions during the final testing, so had to drop some. If I
> can find reasons and simple fixes for those, I would send them later.
>
> So for now these are some rather easy changes:
> - Some cleanups in header files: those do not affect the generated
> binaries at all.
> - The usual update of DT files from the kernel repo, mostly adding new
> board files this time. On the wake of this there is one defconfig to
> enable a new board, some H618 TV box branded as "Transpeed".
> - Samuel's series to support SPL FIT image loading for 32-bit SoCs as
> well, so far this was restricted to ARM64 boards. I refrained from
> automatically enabling this everywhere, instead this requires user
> intervention during board configuration. This allows to ship the "crust"
> management processor firmware on H3 boards, which enables better power
> saving.
> - One defconfig for an older H3 board. There was a close-by defconfig for
> a related board, but there are some differences which deserve a separate
> file.
> - Support for the EMAC driver to work with fixed-link PHYs, which allows
> to directly wire the MAC to a switch IC.
>
> The branch survived build testing for all 167 sunxi boards, and Linux
> boot testing on some selected boards.
>
> Please pull!
>
> Cheers,
> Andre
>
> ==================
> The following changes since commit 526a865fe4fea59fb2638726c26e39557eb97fdd:
>
> Merge branch 'master-cleanup' of https://source.denx.de/u-boot/custodians/u-boot-sh (2024-01-27 20:43:20 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master
>
> for you to fetch changes up to 539612e27690a8df7f197cd1e9f4c2cf6ee1ac64:
>
> sunxi: Consider SPL size limitations for FIT loading (2024-01-29 14:31:00 +0000)
>
> ----------------------------------------------------------------
> Andre Przywara (7):
> sunxi: cleanup sunxi-common.h
> sunxi: sun50i-h6: remove unneeded base addresses from header
> sunxi: sun4i: remove unneeded base addresses from header
> sunxi: sun9i: remove unneeded base addresses from header
> sunxi: remove common.h inclusion
> sunxi: simplify U-Boot proper only builds
> sunxi: dts: update devicetree files from Linux-v6.8-rc1
>
> Chuanhong Guo (1):
> sunxi: add defconfig for nanopi_duo2
>
> Maksim Kiselev (1):
> net: sun8i-emac: Add support for fixed-link phy
>
> Nick Alilovic (1):
> sunxi: add Transpeed 8K618-T board support
>
> Samuel Holland (4):
> sunxi: spl: Disable padding from SPL_PAD_TO
> sunxi: binman: Move BL31 and SCP firmware addresses to Kconfig
> sunxi: binman: Support FIT generation for 32-bit SoCs
> sunxi: Consider SPL size limitations for FIT loading
>
> arch/arm/Kconfig | 4 +-
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts | 35 +++
> arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 138 +++++++++++
> arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 63 +++++
> arch/arm/dts/sun50i-h616.dtsi | 7 +
> arch/arm/dts/sun50i-h618-orangepi-zero2w.dts | 176 +++++++++++++
> arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts | 161 ++++++++++++
> arch/arm/dts/sun8i-r40.dtsi | 2 +
> arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts | 276 +++++++++++++++++++++
> arch/arm/dts/sun8i-v3s.dtsi | 35 +++
> arch/arm/dts/sunxi-u-boot.dtsi | 41 +--
> arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 47 ----
> arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 21 --
> arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 41 ---
> arch/arm/mach-sunxi/Kconfig | 33 ++-
> arch/arm/mach-sunxi/board.c | 1 -
> arch/arm/mach-sunxi/clock.c | 1 -
> arch/arm/mach-sunxi/clock_sun4i.c | 1 -
> arch/arm/mach-sunxi/clock_sun50i_h6.c | 1 -
> arch/arm/mach-sunxi/clock_sun6i.c | 1 -
> arch/arm/mach-sunxi/clock_sun8i_a83t.c | 1 -
> arch/arm/mach-sunxi/clock_sun9i.c | 1 -
> arch/arm/mach-sunxi/cpu_info.c | 1 -
> arch/arm/mach-sunxi/dram_helpers.c | 3 +-
> arch/arm/mach-sunxi/dram_sun4i.c | 1 -
> arch/arm/mach-sunxi/dram_sun50i_h6.c | 1 -
> arch/arm/mach-sunxi/dram_sun50i_h616.c | 1 -
> arch/arm/mach-sunxi/dram_sun6i.c | 1 -
> arch/arm/mach-sunxi/dram_sun8i_a23.c | 1 -
> arch/arm/mach-sunxi/dram_sun8i_a33.c | 1 -
> arch/arm/mach-sunxi/dram_sun8i_a83t.c | 1 -
> arch/arm/mach-sunxi/dram_sun9i.c | 1 -
> arch/arm/mach-sunxi/dram_suniv.c | 2 +-
> arch/arm/mach-sunxi/dram_sunxi_dw.c | 1 -
> arch/arm/mach-sunxi/gtbus_sun9i.c | 1 -
> arch/arm/mach-sunxi/pmic_bus.c | 1 -
> arch/arm/mach-sunxi/prcm.c | 1 -
> arch/arm/mach-sunxi/spl_spi_sunxi.c | 1 -
> arch/arm/mach-sunxi/timer.c | 1 -
> common/spl/Kconfig | 6 +-
> configs/nanopi_duo2_defconfig | 12 +
> configs/transpeed-8k618-t_defconfig | 27 ++
> drivers/net/sun8i_emac.c | 7 +-
> include/configs/sunxi-common.h | 56 +----
> 45 files changed, 1002 insertions(+), 214 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts
> create mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi
> create mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-pi.dts
> create mode 100644 arch/arm/dts/sun50i-h618-orangepi-zero2w.dts
> create mode 100644 arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
> create mode 100644 arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts
> create mode 100644 configs/nanopi_duo2_defconfig
> create mode 100644 configs/transpeed-8k618-t_defconfig
>
next prev parent reply other threads:[~2024-01-29 17:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-29 15:55 Pull request: u-boot-sunxi/master for v2024.04 Andre Przywara
2024-01-29 17:24 ` Andre Przywara [this message]
2024-01-29 17:34 ` Tom Rini
2024-01-29 17:50 ` Andre Przywara
2024-01-29 17:55 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2024-03-05 11:15 Andre Przywara
2024-03-05 13:27 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240129172449.0b9ebc9f@donnerap.manchester.arm.com \
--to=andre.przywara@arm.com \
--cc=bigunclemax@gmail.com \
--cc=gch981213@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=nickalilovic@gmail.com \
--cc=samuel@sholland.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox