From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@csie.org>, Lee Jones <lee@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@lists.linux.dev,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Ryan Walklin <ryan@testtoast.com>,
Chris Morgan <macroalpha82@gmail.com>
Subject: [PATCH 1/4] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
Date: Fri, 29 Mar 2024 23:50:30 +0000 [thread overview]
Message-ID: <20240329235033.25309-2-andre.przywara@arm.com> (raw)
In-Reply-To: <20240329235033.25309-1-andre.przywara@arm.com>
The X-Powers AXP717 PMIC has separate input supply pins for each group
of LDOs, so they are not all using the same DCDC1 input, as described
currently.
Replace the "supply" member of each LDO description with the respective
group supply name, so that the supply dependencies can be correctly
described in the devicetree.
Also fix two off-by-ones in the regulator macros, after some double
checking the numbers against the datasheet.
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/regulator/axp20x-regulator.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 34fcdd82b2eaa..3907606b091f6 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -140,7 +140,7 @@
#define AXP717_DCDC1_NUM_VOLTAGES 88
#define AXP717_DCDC2_NUM_VOLTAGES 107
-#define AXP717_DCDC3_NUM_VOLTAGES 104
+#define AXP717_DCDC3_NUM_VOLTAGES 103
#define AXP717_DCDC_V_OUT_MASK GENMASK(6, 0)
#define AXP717_LDO_V_OUT_MASK GENMASK(4, 0)
@@ -766,7 +766,7 @@ static const struct linear_range axp717_dcdc1_ranges[] = {
static const struct linear_range axp717_dcdc2_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
- REGULATOR_LINEAR_RANGE(1600000, 88, 107, 100000),
+ REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
};
static const struct linear_range axp717_dcdc3_ranges[] = {
@@ -790,40 +790,40 @@ static const struct regulator_desc axp717_regulators[] = {
AXP_DESC(AXP717, DCDC4, "dcdc4", "vin4", 1000, 3700, 100,
AXP717_DCDC4_CONTROL, AXP717_DCDC_V_OUT_MASK,
AXP717_DCDC_OUTPUT_CONTROL, BIT(3)),
- AXP_DESC(AXP717, ALDO1, "aldo1", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, ALDO1, "aldo1", "aldoin", 500, 3500, 100,
AXP717_ALDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(0)),
- AXP_DESC(AXP717, ALDO2, "aldo2", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, ALDO2, "aldo2", "aldoin", 500, 3500, 100,
AXP717_ALDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(1)),
- AXP_DESC(AXP717, ALDO3, "aldo3", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, ALDO3, "aldo3", "aldoin", 500, 3500, 100,
AXP717_ALDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(2)),
- AXP_DESC(AXP717, ALDO4, "aldo4", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, ALDO4, "aldo4", "aldoin", 500, 3500, 100,
AXP717_ALDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(3)),
- AXP_DESC(AXP717, BLDO1, "bldo1", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, BLDO1, "bldo1", "bldoin", 500, 3500, 100,
AXP717_BLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(4)),
- AXP_DESC(AXP717, BLDO2, "bldo2", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, BLDO2, "bldo2", "bldoin", 500, 3500, 100,
AXP717_BLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(5)),
- AXP_DESC(AXP717, BLDO3, "bldo3", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, BLDO3, "bldo3", "bldoin", 500, 3500, 100,
AXP717_BLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(6)),
- AXP_DESC(AXP717, BLDO4, "bldo4", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, BLDO4, "bldo4", "bldoin", 500, 3500, 100,
AXP717_BLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO0_OUTPUT_CONTROL, BIT(7)),
- AXP_DESC(AXP717, CLDO1, "cldo1", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, CLDO1, "cldo1", "cldoin", 500, 3500, 100,
AXP717_CLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO1_OUTPUT_CONTROL, BIT(0)),
- AXP_DESC(AXP717, CLDO2, "cldo2", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, CLDO2, "cldo2", "cldoin", 500, 3500, 100,
AXP717_CLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO1_OUTPUT_CONTROL, BIT(1)),
- AXP_DESC(AXP717, CLDO3, "cldo3", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, CLDO3, "cldo3", "cldoin", 500, 3500, 100,
AXP717_CLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO1_OUTPUT_CONTROL, BIT(2)),
- AXP_DESC(AXP717, CLDO4, "cldo4", "vin1", 500, 3500, 100,
+ AXP_DESC(AXP717, CLDO4, "cldo4", "cldoin", 500, 3500, 100,
AXP717_CLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
AXP717_LDO1_OUTPUT_CONTROL, BIT(3)),
AXP_DESC(AXP717, CPUSLDO, "cpusldo", "vin1", 500, 1400, 50,
--
2.35.8
next prev parent reply other threads:[~2024-03-29 23:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-29 23:50 [PATCH 0/4] regulator: Fix AXP717 PMIC support Andre Przywara
2024-03-29 23:50 ` Andre Przywara [this message]
2024-04-14 8:00 ` [PATCH 1/4] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones John Watts
2024-04-16 11:23 ` Andre Przywara
2024-04-16 13:30 ` John Watts
2024-03-29 23:50 ` [PATCH 2/4] dt-bindings: mfd: x-powers,axp152: add boost regulator Andre Przywara
2024-03-30 9:30 ` Krzysztof Kozlowski
2024-03-30 21:40 ` Andre Przywara
2024-03-30 21:40 ` Andre Przywara
2024-03-29 23:50 ` [PATCH 3/4] mfd: axp20x: AXP717: Add support for " Andre Przywara
2024-04-14 7:47 ` John Watts
2024-03-29 23:50 ` [PATCH 4/4] regulator: axp20x: AXP717: Add " Andre Przywara
2024-04-14 7:47 ` John Watts
2024-04-11 11:22 ` [PATCH 0/4] regulator: Fix AXP717 PMIC support Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240329235033.25309-2-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macroalpha82@gmail.com \
--cc=robh@kernel.org \
--cc=ryan@testtoast.com \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox