From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by smtp.subspace.kernel.org (Postfix) with ESMTP id EF3D0363 for ; Wed, 24 Apr 2024 00:18:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.140.110.172 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713917912; cv=none; b=PPztJNZ7jxe1TjrrCymXb1YA0k1YMataxGMoGkRFrRwZ/CQCvzN8GAXfud5HAs78A4j1iP45F9VC/5Mh82JbTuX09dj5uJHPDFbOwGlUfK7IV1SoixEk2OG63ieZIr1M/xaSbhVcKIPM9JRfkGc3lhXkA9JKkAeOjS1TtQzwPOI= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713917912; c=relaxed/simple; bh=ezxTi02RpRBlBLhU/2oK82P3H5JuqqHHAAjW01ZW7m8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=IfMj8fvEfDG9W/qANti6EBTJP7bWi6WqxY96OmGS4sLAMI43smEHmLiZjDDLELaZj0eQfqPph+g3ksC9qCoDdJSIcS1C6A0O83L4ZA/OfkrhPu+w8d1nqoEpmON/0Anjm2Z3YI1en1wRLeKEu1iOnQpjsR+Xt76eOgpghH3H/VM= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=arm.com; spf=pass smtp.mailfrom=arm.com; arc=none smtp.client-ip=217.140.110.172 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=arm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=arm.com Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id D70541063; Tue, 23 Apr 2024 17:18:57 -0700 (PDT) Received: from localhost.localdomain (usa-sjc-mx-foss1.foss.arm.com [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 64D423F7BD; Tue, 23 Apr 2024 17:18:29 -0700 (PDT) From: Andre Przywara To: Jagan Teki Cc: u-boot@lists.denx.de, linux-sunxi@lists.linux.dev, Piotr Oniszczuk Subject: [PATCH 3/4] [DO NOT MERGE] sunxi: dts: arm64: add Tanix TX1 DT from Linux Date: Wed, 24 Apr 2024 01:18:07 +0100 Message-Id: <20240424001808.14388-4-andre.przywara@arm.com> X-Mailer: git-send-email 2.35.8 In-Reply-To: <20240424001808.14388-1-andre.przywara@arm.com> References: <20240424001808.14388-1-andre.przywara@arm.com> Precedence: bulk X-Mailing-List: linux-sunxi@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add the board DT file for the Tanix TX1 TV box, with the H313 SoC. This has been taken from the sunxi/for-next tree, though it has not been merged into any other tree yet. So this is a placeholder for now, to enable the board support, and will be superseded by the regular sync of the DT files later. Signed-off-by: Andre Przywara --- arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 +++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts diff --git a/arch/arm/dts/sun50i-h313-tanix-tx1.dts b/arch/arm/dts/sun50i-h313-tanix-tx1.dts new file mode 100644 index 00000000000..bb2cde59bd0 --- /dev/null +++ b/arch/arm/dts/sun50i-h313-tanix-tx1.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include +#include +#include +#include + +/ { + model = "Tanix TX1"; + compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + ethernet0 = &sdio_wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "hidden"; + linux,code = ; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + default-state = "on"; + }; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + max-frequency = <100000000>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_dldo1>; + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* Supplies VCC-PLL, so needs to be always on. */ + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Supplies VCC-IO, so needs to be always on. */ + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1120000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- 2.35.8