[PATCH 3/6] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL

[Ryan Walklin <ryan@testtoast.com>]

Allwinner has previously released a H616 audio driver which also
provides sigma-delta modulation for the audio PLL clocks. This approach
is used in other Allwinner SoCs, including the H3 and A64.

One change from the vendor code is made to the PLL clocks, the 
vendor-specified dividers of 4/2/1 for the 1/2/4x clocks respectively result 
in audio playback that is too slow by 50%. Therefore the dividers are simply
doubled to 8/4/2 which results in correct playback rates.

Add SDM to the H616 clock control unit driver.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 36 +++++++++++++-------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
index 84e406ddf9d12..be272947b0fee 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
@@ -215,20 +215,23 @@ static struct ccu_nkmp pll_de_clk = {
 	},
 };
 
-/*
- * TODO: Determine SDM settings for the audio PLL. The manual suggests
- * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b
- * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2,
- * pattern=0xe001288c for 22.5792 MHz.
- * This clashes with our fixed PLL_POST_DIV_P.
- */
 #define SUN50I_H616_PLL_AUDIO_REG	0x078
+
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+	{ .rate = 90316800, .pattern = 0xc001288d, .m = 3, .n = 22 },
+	{ .rate = 98304000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
+};
+
 static struct ccu_nm pll_audio_hs_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(28),
-	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
-	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.n			= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m			= _SUNXI_CCU_DIV(16, 6),
+	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table,
+				  BIT(24), 0x178, BIT(31)),
+
 	.common		= {
+		.features = CCU_FEATURE_SIGMA_DELTA_MOD,
 		.reg		= 0x078,
 		.hw.init	= CLK_HW_INIT("pll-audio-hs", "osc24M",
 					      &ccu_nm_ops,
@@ -690,13 +693,13 @@ static const struct clk_hw *clk_parent_pll_audio[] = {
  */
 static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
 			    clk_parent_pll_audio,
-			    96, 1, CLK_SET_RATE_PARENT);
+			    8, 1, CLK_SET_RATE_PARENT);
 static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
 			    clk_parent_pll_audio,
-			    48, 1, CLK_SET_RATE_PARENT);
+			    4, 1, CLK_SET_RATE_PARENT);
 static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
 			    clk_parent_pll_audio,
-			    24, 1, CLK_SET_RATE_PARENT);
+			    2, 1, CLK_SET_RATE_PARENT);
 
 static const struct clk_hw *pll_periph0_parents[] = {
 	&pll_periph0_clk.common.hw
@@ -1135,13 +1138,10 @@ static int sun50i_h616_ccu_probe(struct platform_device *pdev)
 		writel(val, reg + usb2_clk_regs[i]);
 	}
 
-	/*
-	 * Force the post-divider of pll-audio to 12 and the output divider
-	 * of it to 2, so 24576000 and 22579200 rates can be set exactly.
-	 */
 	val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
-	val &= ~(GENMASK(21, 16) | BIT(0));
-	writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG);
+	val &= ~BIT(1);
+	val |= BIT(0);
+	writel(val, reg + SUN50I_H616_PLL_AUDIO_REG);
 
 	/*
 	 * First clock parent (osc32K) is unusable for CEC. But since there
-- 
2.46.1