From: Andre Przywara <andre.przywara@arm.com>
To: Tom Rini <trini@konsulko.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>,
Chris Morgan <macromorgan@hotmail.com>,
u-boot@lists.denx.de, linux-sunxi@lists.linux.dev
Subject: Pull request: u-boot-sunxi/master for 2025.01
Date: Mon, 14 Oct 2024 00:45:31 +0100 [thread overview]
Message-ID: <20241013234531.9990-1-andre.przywara@arm.com> (raw)
Hi Tom,
please pull the first sunxi changes for this cycle:
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
Thanks,
Andre
===========================================================
The following changes since commit f8efc68b30e29360f7a419fe4968432179d7368b:
Merge patch series "spi-nor: Add parallel and stacked memories support" (2024-10-09 09:02:22 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master
for you to fetch changes up to 2f7ab49644ed38b6e3fe5eb6cd3f7e3f683fc6a7:
sunxi: Add support for Anbernic RG35XX-2024 (2024-10-10 00:43:51 +0100)
----------------------------------------------------------------
Andre Przywara (3):
sunxi: H616: switch to OF_UPSTREAM
clk: sunxi: a80: Fix reset description
sunxi: power: axp809: Fix DCDC4 programming
Chris Morgan (4):
sunxi: H616: DRAM: Add alternative pin mapping
arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
sunxi: Add support for Anbernic RG35XX-2024
Jernej Skrabec (4):
sunxi: H616: dram: LPDDR4: adjust settings
sunxi: H616: DRAM: Adjust configuration procedure
sunxi: H616: DRAM: Adjust size scan procedure
sunxi: H616: dram: Update mbus priorities
arch/arm/dts/Makefile | 7 -
arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 ----
arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts | 35 -
arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 143 ----
arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 63 --
arch/arm/dts/sun50i-h616-cpu-opp.dtsi | 115 ---
arch/arm/dts/sun50i-h616-orangepi-zero.dtsi | 131 ---
arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 145 ----
arch/arm/dts/sun50i-h616-x96-mate.dts | 207 -----
arch/arm/dts/sun50i-h616.dtsi | 930 ---------------------
arch/arm/dts/sun50i-h618-longan-module-3h.dtsi | 80 --
arch/arm/dts/sun50i-h618-longanpi-3h.dts | 144 ----
arch/arm/dts/sun50i-h618-orangepi-zero2w.dts | 181 ----
arch/arm/dts/sun50i-h618-orangepi-zero3.dts | 101 ---
arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts | 189 -----
arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts | 327 --------
arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts | 36 -
arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts | 53 --
arch/arm/mach-sunxi/Kconfig | 18 +
arch/arm/mach-sunxi/dram_sun50i_h616.c | 137 ++-
.../arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c | 2 +-
board/sunxi/MAINTAINERS | 5 +
configs/anbernic_rg35xx_h700_defconfig | 27 +
configs/orangepi_zero2_defconfig | 2 +-
configs/orangepi_zero2w_defconfig | 2 +-
configs/orangepi_zero3_defconfig | 2 +-
configs/tanix_tx1_defconfig | 2 +-
configs/transpeed-8k618-t_defconfig | 2 +-
configs/x96_mate_defconfig | 2 +-
drivers/clk/sunxi/clk_a80.c | 8 +-
drivers/power/axp809.c | 2 +-
dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi | 2 +
.../allwinner/sun50i-h700-anbernic-rg35xx-2024.dts | 6 +-
include/dt-bindings/clock/sun50i-h616-ccu.h | 116 ---
include/dt-bindings/reset/sun50i-h616-ccu.h | 70 --
35 files changed, 159 insertions(+), 3316 deletions(-)
delete mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts
delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts
delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi
delete mode 100644 arch/arm/dts/sun50i-h616-bigtreetech-pi.dts
delete mode 100644 arch/arm/dts/sun50i-h616-cpu-opp.dtsi
delete mode 100644 arch/arm/dts/sun50i-h616-orangepi-zero.dtsi
delete mode 100644 arch/arm/dts/sun50i-h616-orangepi-zero2.dts
delete mode 100644 arch/arm/dts/sun50i-h616-x96-mate.dts
delete mode 100644 arch/arm/dts/sun50i-h616.dtsi
delete mode 100644 arch/arm/dts/sun50i-h618-longan-module-3h.dtsi
delete mode 100644 arch/arm/dts/sun50i-h618-longanpi-3h.dts
delete mode 100644 arch/arm/dts/sun50i-h618-orangepi-zero2w.dts
delete mode 100644 arch/arm/dts/sun50i-h618-orangepi-zero3.dts
delete mode 100644 arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts
delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts
delete mode 100644 arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts
create mode 100644 configs/anbernic_rg35xx_h700_defconfig
delete mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
delete mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
next reply other threads:[~2024-10-13 23:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-13 23:45 Andre Przywara [this message]
2024-10-14 14:02 ` Pull request: u-boot-sunxi/master for 2025.01 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241013234531.9990-1-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox