From: Chris Morgan <macroalpha82@gmail.com>
To: linux-sunxi@lists.linux.dev
Cc: devicetree@vger.kernel.org, samuel@sholland.org,
jernej.skrabec@gmail.com, wens@csie.org, conor+dt@kernel.org,
krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 1/4] arm64: dts: allwinner: h700: Add MMC2 for Anbernic RG35XX
Date: Fri, 18 Oct 2024 11:06:14 -0500 [thread overview]
Message-ID: <20241018160617.157083-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20241018160617.157083-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the second MMC slot on the Anbernic RG35XX series.
The second MMC card is connected to MMC2 (WiFi if present is MMC1).
The MMC logic is powered by cldo3 via the power domain to which
it is connected, and also has an external 3.3v GPIO controlled
regulator required for functionality.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../sun50i-h700-anbernic-rg35xx-2024.dts | 27 +++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index 80ccab7b5ba7..e2039fd76b3d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -18,6 +18,9 @@ / {
compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc2;
+ mmc2 = &mmc1;
serial0 = &uart0;
};
@@ -175,6 +178,15 @@ reg_vcc5v: regulator-vcc5v { /* USB-C power input */
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ reg_vcc3v3_mmc2: regulator-vcc3v3-mmc2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-mmc2";
+ };
};
&cpu0 {
@@ -186,10 +198,21 @@ &ehci0 {
};
&mmc0 {
- vmmc-supply = <®_cldo3>;
- disable-wp;
+ bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ no-1-8-v;
+ vmmc-supply = <®_cldo3>;
+ status = "okay";
+};
+
+&mmc2 {
bus-width = <4>;
+ cd-gpios = <&pio 4 22 GPIO_ACTIVE_LOW>; /* PE22 */
+ disable-wp;
+ no-1-8-v;
+ vmmc-supply = <®_vcc3v3_mmc2>;
+ vqmmc-supply = <®_cldo3>;
status = "okay";
};
--
2.43.0
next prev parent reply other threads:[~2024-10-18 16:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-18 16:06 [PATCH 0/4] RG35XX Add Additional Hardware Support Chris Morgan
2024-10-18 16:06 ` Chris Morgan [this message]
2025-02-22 10:44 ` [PATCH 1/4] arm64: dts: allwinner: h700: Add MMC2 for Anbernic RG35XX Jernej Škrabec
2025-02-24 18:17 ` Chris Morgan
2025-02-25 16:13 ` Jernej Škrabec
2025-02-25 16:54 ` Andre Przywara
2024-10-18 16:06 ` [PATCH 2/4] arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX Chris Morgan
2025-02-22 10:46 ` Jernej Škrabec
2024-10-18 16:06 ` [PATCH 3/4] arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX Chris Morgan
2025-02-22 10:47 ` Jernej Škrabec
2024-10-18 16:06 ` [PATCH 4/4] arm64: dts: allwinner: h700: Add USB Host for RG35XX-H Chris Morgan
2025-02-22 10:48 ` Jernej Škrabec
2025-02-22 13:25 ` (subset) [PATCH 0/4] RG35XX Add Additional Hardware Support Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241018160617.157083-2-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox