public inbox for linux-sunxi@lists.linux.dev
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>
Cc: David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Steven Price <steven.price@arm.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-pm@vger.kernel.org
Subject: [PATCH 5/5] arm64: dts: allwinner: h616: enable Mali GPU for all boards
Date: Fri, 21 Feb 2025 00:58:02 +0000	[thread overview]
Message-ID: <20250221005802.11001-6-andre.przywara@arm.com> (raw)
In-Reply-To: <20250221005802.11001-1-andre.przywara@arm.com>

All Allwinner H616/H618 SoCs contain a Mali G31 MP2 GPU.

Enable the DT nodes for that GPU, and specify the regulator providing
power to the VDD_GPU pins of the package. The rest of the DT node is set
by the SoC, so is not board specific.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts      | 5 +++++
 .../boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi      | 5 +++++
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 4 ++++
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 4 ++++
 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts       | 5 +++++
 .../boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi     | 5 +++++
 .../arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts | 5 +++++
 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
 .../boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts     | 5 +++++
 .../boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts    | 5 +++++
 .../boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts  | 5 +++++
 11 files changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
index 17e6aef67aaf9..7906b79c03898 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -79,6 +79,11 @@ &ehci0 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index d12b01c5f41b6..bebfeb2a337a3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -67,6 +67,11 @@ &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 908fa3b847a66..a8644fb52b04e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -77,6 +77,10 @@ &emac0 {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdio0 {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index a360d8567f955..f2e3300e078a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -24,6 +24,10 @@ &emac0 {
 	phy-supply = <&reg_dcdce>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 968960ebf1d18..085f3e4e8eaa8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -50,6 +50,11 @@ &ehci2 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
index e92d150aaf1c1..3f416d129b727 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -10,6 +10,11 @@ &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
index a0fe7a9afb77c..b340bbcb710de 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -69,6 +69,11 @@ &ehci1 {
 
 /* USB 2 & 3 are on the FPC connector (or the exansion board) */
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index e1cd7572a14ce..c51d4d9120dee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -27,6 +27,10 @@ &ext_rgmii_phy {
 	motorcomm,clk-out-frequency-hz = <125000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
 &mmc0 {
 	/*
 	 * The schematic shows the card detect pin wired up to PF6, via an
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
index f828ca1ce51ef..efe0faa252f5e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -69,6 +69,11 @@ &ehci1 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
index 747242becbb6e..d6768455404ee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -68,6 +68,11 @@ &ehci3 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index a231abf1684ad..4a7f382e0e722 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -191,6 +191,11 @@ &ehci0 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo3>;
 	disable-wp;
-- 
2.46.3


  parent reply	other threads:[~2025-02-21  1:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-21  0:57 [PATCH 0/5] arm64: sunxi: h616: Enable Mali GPU Andre Przywara
2025-02-21  0:57 ` [PATCH 1/5] dt-bindings: power: Add Allwinner H6/H616 PRCM PPU Andre Przywara
2025-02-21 23:43   ` Rob Herring (Arm)
2025-02-21  0:57 ` [PATCH 2/5] pmdomain: sunxi: add H6 PRCM PPU driver Andre Przywara
2025-02-21 18:10   ` Jernej Škrabec
2025-04-16 15:00     ` Andre Przywara
2025-02-27 22:43   ` Ulf Hansson
2025-04-16 15:01     ` Andre Przywara
2025-02-21  0:58 ` [PATCH 3/5] dt-bindings: gpu: mali-bifrost: Add Allwinner H616 compatible Andre Przywara
2025-02-21 18:11   ` Jernej Škrabec
2025-02-21 23:44   ` Rob Herring (Arm)
2025-02-21  0:58 ` [PATCH 4/5] arm64: dts: allwinner: h616: Add Mali GPU node Andre Przywara
2025-02-21 18:14   ` Jernej Škrabec
2025-02-21  0:58 ` Andre Przywara [this message]
2025-02-21 18:15   ` [PATCH 5/5] arm64: dts: allwinner: h616: enable Mali GPU for all boards Jernej Škrabec
2025-03-02 22:44 ` [PATCH 0/5] arm64: sunxi: h616: Enable Mali GPU Philippe Simons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250221005802.11001-6-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=airlied@gmail.com \
    --cc=boris.brezillon@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=simona@ffwll.ch \
    --cc=steven.price@arm.com \
    --cc=tzimmermann@suse.de \
    --cc=ulf.hansson@linaro.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox