From: iuncuim <iuncuim@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Subject: [PATCH 5/6] arm64: dts: allwinner: A523: Add thermal sensors and zones
Date: Fri, 11 Apr 2025 08:38:25 +0800 [thread overview]
Message-ID: <20250411003827.782544-6-iuncuim@gmail.com> (raw)
In-Reply-To: <20250411003827.782544-1-iuncuim@gmail.com>
From: Mikhail Kalashnikov <iuncuim@gmail.com>
The A523 processor has two temperature controllers, THS0 and THS1.
THS0 has only one temperature sensor, which is located in the DRAM.
THS1 does have 3 sensors:
ths1_0 - "big" cores
ths1_1 - "little" cores
ths1_2 - gpu
Add the thermal sensor configuration and the thermal zones
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
---
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 138 ++++++++++++++++++
1 file changed, 138 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index d626612bb..4f36032b2 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
#include <dt-bindings/reset/sun55i-a523-ccu.h>
#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -22,6 +23,7 @@ cpu0: cpu@0 {
device_type = "cpu";
reg = <0x000>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu1: cpu@100 {
@@ -29,6 +31,7 @@ cpu1: cpu@100 {
device_type = "cpu";
reg = <0x100>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu2: cpu@200 {
@@ -36,6 +39,7 @@ cpu2: cpu@200 {
device_type = "cpu";
reg = <0x200>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu3: cpu@300 {
@@ -43,6 +47,7 @@ cpu3: cpu@300 {
device_type = "cpu";
reg = <0x300>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu4: cpu@400 {
@@ -50,6 +55,7 @@ cpu4: cpu@400 {
device_type = "cpu";
reg = <0x400>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu5: cpu@500 {
@@ -57,6 +63,7 @@ cpu5: cpu@500 {
device_type = "cpu";
reg = <0x500>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu6: cpu@600 {
@@ -64,6 +71,7 @@ cpu6: cpu@600 {
device_type = "cpu";
reg = <0x600>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu7: cpu@700 {
@@ -71,6 +79,7 @@ cpu7: cpu@700 {
device_type = "cpu";
reg = <0x700>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
};
@@ -171,11 +180,39 @@ ccu: clock-controller@2001000 {
#reset-cells = <1>;
};
+ ths1: thermal-sensor@2009400 {
+ compatible = "allwinner,sun55i-a523-ths1";
+ reg = <0x02009400 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+ clock-names = "bus", "gpadc";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
+ ths0: thermal-sensor@200a000 {
+ compatible = "allwinner,sun55i-a523-ths0";
+ reg = <0x0200a000 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC0>;
+ clock-names = "bus", "gpadc";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <0>;
+ };
+
sid: efuse@3006000 {
compatible = "allwinner,sun50i-a523-sid", "allwinner,sun50i-a64-sid";
reg = <0x03006000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@38 {
+ reg = <0x38 0x14>;
+ };
};
mmc0: mmc@4020000 {
@@ -602,4 +639,105 @@ rtc: rtc@7090000 {
#clock-cells = <1>;
};
};
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths1 1>;
+ sustainable-power = <1200>;
+
+ trips {
+ cpu0_threshold: cpu-trip-0 {
+ temperature = <70000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu0_target: cpu-trip-1 {
+ temperature = <90000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu0_critical: cpu-trip-2 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4_thermal: cpu4-thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths1 0>;
+ sustainable-power = <1600>;
+
+ trips {
+ cpu4_threshold: cpu-trip-0 {
+ temperature = <70000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu4_target: cpu-trip-1 {
+ temperature = <90000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu4_critical: cpu-trip-2 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_target>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths1 2>;
+ sustainable-power = <2400>;
+
+ trips {
+ gpu_temp_critical: gpu-trip-0 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths0>;
+
+ trips {
+ ddr_temp_critical: ddr-trip-0 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+ };
};
--
2.49.0
next prev parent reply other threads:[~2025-04-11 0:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-11 0:38 [PATCH 0/6] Add support for A523 Thermal system iuncuim
2025-04-11 0:38 ` [PATCH 1/6] thermal/drivers/sun8i: add gpadc clock iuncuim
2025-04-18 8:37 ` Daniel Lezcano
2025-04-11 0:38 ` [PATCH 2/6] thermal/drivers/sun8i: replace devm_reset_control_get to shared iuncuim
2025-06-30 4:53 ` Chen-Yu Tsai
2025-04-11 0:38 ` [PATCH 3/6] thermal/drivers/sun8i: Add support for A523 THS0/1 controllers iuncuim
2025-04-18 8:41 ` Daniel Lezcano
2025-04-11 0:38 ` [PATCH 4/6] arm64: dts: allwinner: A523: Add SID controller node iuncuim
2025-06-30 4:32 ` Chen-Yu Tsai
2025-04-11 0:38 ` iuncuim [this message]
2025-06-30 4:45 ` [PATCH 5/6] arm64: dts: allwinner: A523: Add thermal sensors and zones Chen-Yu Tsai
2025-04-11 0:38 ` [PATCH 6/6] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers iuncuim
2025-04-11 1:21 ` Rob Herring (Arm)
2025-04-12 0:50 ` Mikhail Kalashnikov
2025-04-11 13:43 ` Rob Herring
2025-04-11 13:11 ` [PATCH 0/6] Add support for A523 Thermal system Rob Herring (Arm)
2025-04-12 0:53 ` Mikhail Kalashnikov
2025-04-13 22:11 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250411003827.782544-6-iuncuim@gmail.com \
--to=iuncuim@gmail.com \
--cc=anarsoul@gmail.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=piotr.oniszczuk@gmail.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=samuel@sholland.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox