From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ryan Walklin <ryan@testtoast.com>,
Chris Morgan <macromorgan@hotmail.com>,
Philippe Simons <simons.philippe@gmail.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
wens@csie.org, jernej.skrabec@gmail.com, samuel@sholland.org,
csokas.bence@prolan.hu, mesihkilinc@gmail.com,
andre.przywara@arm.com, codekipper@gmail.com,
jbrunet@baylibre.com, linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH AUTOSEL 6.12 123/486] ASoC: sun4i-codec: support hp-det-gpios property
Date: Mon, 5 May 2025 18:33:19 -0400 [thread overview]
Message-ID: <20250505223922.2682012-123-sashal@kernel.org> (raw)
In-Reply-To: <20250505223922.2682012-1-sashal@kernel.org>
From: Ryan Walklin <ryan@testtoast.com>
[ Upstream commit a149377c033afe6557c50892ebbfc0e8b7e2e253 ]
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/sunxi/sun4i-codec.c | 53 +++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 330bc0c09f56b..93dd88fb805dd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -21,6 +21,7 @@
#include <linux/gpio/consumer.h>
#include <sound/core.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -235,6 +236,7 @@ struct sun4i_codec {
struct clk *clk_module;
struct reset_control *rst;
struct gpio_desc *gpio_pa;
+ struct gpio_desc *gpio_hp;
/* ADC_FIFOC register is at different offset on different SoCs */
struct regmap_field *reg_adc_fifoc;
@@ -1263,6 +1265,49 @@ static struct snd_soc_dai_driver dummy_cpu_dai = {
.ops = &dummy_dai_ops,
};
+static struct snd_soc_jack sun4i_headphone_jack;
+
+static struct snd_soc_jack_pin sun4i_headphone_jack_pins[] = {
+ { .pin = "Headphone", .mask = SND_JACK_HEADPHONE },
+};
+
+static struct snd_soc_jack_gpio sun4i_headphone_jack_gpio = {
+ .name = "hp-det",
+ .report = SND_JACK_HEADPHONE,
+ .debounce_time = 150,
+};
+
+static int sun4i_codec_machine_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct sun4i_codec *scodec = snd_soc_card_get_drvdata(card);
+ int ret;
+
+ if (scodec->gpio_hp) {
+ ret = snd_soc_card_jack_new_pins(card, "Headphone Jack",
+ SND_JACK_HEADPHONE,
+ &sun4i_headphone_jack,
+ sun4i_headphone_jack_pins,
+ ARRAY_SIZE(sun4i_headphone_jack_pins));
+ if (ret) {
+ dev_err(rtd->dev,
+ "Headphone jack creation failed: %d\n", ret);
+ return ret;
+ }
+
+ sun4i_headphone_jack_gpio.desc = scodec->gpio_hp;
+ ret = snd_soc_jack_add_gpios(&sun4i_headphone_jack, 1,
+ &sun4i_headphone_jack_gpio);
+
+ if (ret) {
+ dev_err(rtd->dev, "Headphone GPIO not added: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev,
int *num_links)
{
@@ -1288,6 +1333,7 @@ static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev,
link->codecs->name = dev_name(dev);
link->platforms->name = dev_name(dev);
link->dai_fmt = SND_SOC_DAIFMT_I2S;
+ link->init = sun4i_codec_machine_init;
*num_links = 1;
@@ -1728,6 +1774,13 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return ret;
}
+ scodec->gpio_hp = devm_gpiod_get_optional(&pdev->dev, "hp-det", GPIOD_IN);
+ if (IS_ERR(scodec->gpio_hp)) {
+ ret = PTR_ERR(scodec->gpio_hp);
+ dev_err_probe(&pdev->dev, ret, "Failed to get hp-det gpio\n");
+ return ret;
+ }
+
/* reg_field setup */
scodec->reg_adc_fifoc = devm_regmap_field_alloc(&pdev->dev,
scodec->regmap,
--
2.39.5
parent reply other threads:[~2025-05-05 22:43 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20250505223922.2682012-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250505223922.2682012-123-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andre.przywara@arm.com \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=csokas.bence@prolan.hu \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=mesihkilinc@gmail.com \
--cc=perex@perex.cz \
--cc=ryan@testtoast.com \
--cc=samuel@sholland.org \
--cc=simons.philippe@gmail.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox