public inbox for linux-sunxi@lists.linux.dev
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: u-boot@lists.denx.de
Cc: Chen-Yu Tsai <wens@kernel.org>,
	Andre Przywara <andre.przywara@arm.com>,
	linux-sunxi@lists.linux.dev
Subject: [PATCH] sunxi: a523: Add OrangePi 4A defconfig
Date: Tue, 21 Oct 2025 00:19:30 +0800	[thread overview]
Message-ID: <20251020161930.2761929-1-wens@kernel.org> (raw)

The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.

The board has the following features:
- Allwinner T527 SoC
- AXP717B + AXP323 PMICs
- Up to 4GB LPDDR4 DRAM
- micro SD slot
- optional eMMC module
- M.2 slot for PCIe 2.0 x1
- 16 MB SPI-NOR flash
- 4x USB 2.0 type-A ports (one can be used in gadget mode)
- 1x Gigabit ethernet w/ Motorcomm PHY (through yet to be supported GMAC200)
- 3.5mm audio jack via internal audio codec
- HDMI 2.0 output
- eDP, MIPI CSI (2-lane and 4-lane) and MIPI DSI (4-lane) connectors
- USB type-C port purely for power
- AP6256 (Broadcom BCM4345) WiFi 5.0 + BT 5.0
- unsoldered headers for ADC and an additional USB 2.0 host port
- 40-pin GPIO header

Add defconfig for it.

Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
---
 board/sunxi/MAINTAINERS       |  5 +++++
 configs/orangepi_4a_defconfig | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)
 create mode 100644 configs/orangepi_4a_defconfig

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index e00b54f45356..897f4009b29d 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -435,6 +435,11 @@ M:	Andre Heider <a.heider@gmail.com>
 S:	Maintained
 F:	configs/orangepi_3_defconfig
 
+ORANGEPI 4A BOARD
+M:	Chen-Yu Tsai <wens@kernel.org>
+S:	Maintained
+F:	configs/orangepi_4a_defconfig
+
 ORANGEPI LITE2 BOARD
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/orangepi_4a_defconfig b/configs/orangepi_4a_defconfig
new file mode 100644
index 000000000000..6a44dd979590
--- /dev/null
+++ b/configs/orangepi_4a_defconfig
@@ -0,0 +1,32 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun55i-t527-orangepi-4a"
+CONFIG_SPL=y
+CONFIG_DRAM_SUNXI_DX_ODT=0x07070707
+CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d
+CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e
+CONFIG_DRAM_SUNXI_ODT_EN=0x84848484
+CONFIG_DRAM_SUNXI_TPR0=0x80808080
+CONFIG_DRAM_SUNXI_TPR1=0x06060606
+CONFIG_DRAM_SUNXI_TPR2=0x5f090503
+CONFIG_DRAM_SUNXI_TPR6=0x38000000
+CONFIG_DRAM_SUNXI_TPR10=0x802f3333
+CONFIG_DRAM_SUNXI_TPR11=0xc6c4c2c0
+CONFIG_DRAM_SUNXI_TPR12=0x3a373233
+CONFIG_MACH_SUN55I_A523=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_REGULATOR_AXP=y
+CONFIG_AXP717_POWER=y
+CONFIG_AXP_I2C_ADDRESS=0x35
+CONFIG_AXP_DCDC2_VOLT=920
+CONFIG_AXP_DCDC3_VOLT=1160
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
-- 
2.47.3


             reply	other threads:[~2025-10-20 16:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-20 16:19 Chen-Yu Tsai [this message]
2025-10-26 23:06 ` [PATCH] sunxi: a523: Add OrangePi 4A defconfig Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251020161930.2761929-1-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=andre.przywara@arm.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox