Re: [PATCH v2 02/10] sunxi: spl: a733: config text and stack address

[Andre Przywara <andre.przywara@arm.com>]

On Sun, 30 Nov 2025 21:45:11 +0000
Yixun Lan <dlan@gentoo.org> wrote:

> Add some ciritial SPL settings for A733 SoC
> 
> - Set SPL MAX SIZE to 180KB, 0x47000 - 0x74000
> - Set SPL running address to 0x47000, with a header padded before
>   the image, so the final SPL text address need to shift 0x60 bytes.
> - Set Stack address

The patch separation for those addresses looks a bit arbitrary, since
there are other SPL specific addresses in patch 01/10, and we don't
really support an SPL anyway.
So either drop this patch, or merge it into the previous one.

Cheers,
Andre

> 
> Signed-off-by: Yixun Lan <dlan@gentoo.org>
> ---
>  common/spl/Kconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 24d6ce5d739..ba98b76bbc6 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -81,6 +81,7 @@ config SPL_MAX_SIZE
>  	default 0xec00 if OMAP34XX
>  	default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB
>  	default 0xbfa0 if MACH_SUN50I_H616 || MACH_SUN50I_A133 || MACH_SUN55I_A523
> +	default 0x2d000 if MACH_SUN60I_A733
>  	default 0x7000 if RCAR_GEN3
>  	default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0
>  	default 0x7fa0 if ARCH_SUNXI
> @@ -279,6 +280,7 @@ config SPL_TEXT_BASE
>  	default 0x40301350 if OMAP54XX
>  	default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I
>  	default 0x44060 if MACH_SUN55I_A523
> +	default 0x47060 if MACH_SUN60I_A733
>  	default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
>  	default 0x00060 if ARCH_SUNXI
>  	default 0xfffc0000 if ARCH_ZYNQMP
> @@ -434,6 +436,7 @@ config SPL_STACK
>  	default 0x52a00 if MACH_SUN50I_H616
>  	default 0x40000 if MACH_SUN8I_R528 || MACH_SUN50I_A133
>  	default 0x44000 if MACH_SUN55I_A523
> +	default 0x5A000 if MACH_SUN60I_A733
>  	default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5
>  	default 0x18000 if MACH_SUN9I
>  	default 0x8000 if ARCH_SUNXI
>