[PATCH 4/5] sunxi: configs: Radxa Cubie A5E: enable SPI

[Andre Przywara <andre.przywara@arm.com>]

The Radxa Cubie A5E ships with SPI NOR flash, so enable the SPI and
flash drivers, also the SPL version, for SPI booting.

Sync the defconfig file with the version from savedefconfig on the way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/radxa-cubie-a5e_defconfig | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/configs/radxa-cubie-a5e_defconfig b/configs/radxa-cubie-a5e_defconfig
index 84bc4e3d4a9..2a66d0e0866 100644
--- a/configs/radxa-cubie-a5e_defconfig
+++ b/configs/radxa-cubie-a5e_defconfig
@@ -15,6 +15,7 @@ CONFIG_DRAM_SUNXI_TPR12=0x3533302f
 CONFIG_MACH_SUN55I_A523=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SPI_SUNXI=y
 CONFIG_SPL_SUNXI_LED_STATUS=y
 CONFIG_SPL_SUNXI_LED_STATUS_GPIO=356
 # CONFIG_SPL_SUNXI_LED_STATUS_ACTIVE_HIGH is not set
@@ -25,11 +26,14 @@ CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_PHY_REALTEK=y
+CONFIG_MTD=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_PHY_REALTEK=y
 CONFIG_REGULATOR_AXP=y
 CONFIG_AXP717_POWER=y
 CONFIG_AXP_DCDC2_VOLT=920
 CONFIG_AXP_DCDC3_VOLT=1100
+CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-- 
2.46.4