From: sashiko-bot@kernel.org
To: "Cristian Ciocaltea" <cristian.ciocaltea@collabora.com>
Cc: linux-sunxi@lists.linux.dev, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v9 25/61] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages
Date: Thu, 23 Jul 2026 01:48:36 +0000 [thread overview]
Message-ID: <20260723014836.C4D601F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260723-dw-hdmi-qp-scramb-v9-25-4fb12ea22ac9@collabora.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Dangling pointer in drvdata leads to Use-After-Free during system suspend/resume.
--
--- Patch [25]: [PATCH v9 25/61] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages ---
commit 999c1afbb80ca84beaa74359eb4e6c431826da22
Author: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages
This commit adds missing trailing newlines to a couple of dev_err_probe()
calls in dw_hdmi_qp_rockchip_bind().
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
> index 7c9d26d796642..369f1066dabe8 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
[ ... ]
> @@ -681,7 +681,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
> drm_encoder_helper_add(encoder, &dw_hdmi_qp_rockchip_encoder_helper_funcs);
> ret = drmm_encoder_init(drm, encoder, NULL, DRM_MODE_ENCODER_TMDS, NULL);
> if (ret)
> - return dev_err_probe(hdmi->dev, ret, "Failed to init encoder");
> + return dev_err_probe(hdmi->dev, ret, "Failed to init encoder\n");
>
> platform_set_drvdata(pdev, hdmi);
>
> @@ -689,8 +689,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
> if (IS_ERR(hdmi->hdmi)) {
> ret = PTR_ERR(hdmi->hdmi);
> hdmi->hdmi = NULL;
> - return dev_err_probe(hdmi->dev, ret,
> - "Failed to bind dw-hdmi-qp");
> + return dev_err_probe(hdmi->dev, ret, "Failed to bind dw-hdmi-qp\n");
> }
[Severity: High]
This isn't a bug introduced by this patch, but could this lead to a
use-after-free during system suspend?
Because hdmi is allocated with drmm_kzalloc(), if dw_hdmi_qp_bind() or
drm_bridge_connector_init() fails later in this function, the DRM framework
will automatically free the memory. However, platform_set_drvdata() has
already stored the pointer, and it is never cleared in the error paths or
in dw_hdmi_qp_rockchip_unbind().
During system suspend, dw_hdmi_qp_rockchip_suspend() fetches this pointer:
dw_hdmi_qp_rockchip_suspend() {
struct rockchip_hdmi_qp *hdmi = dev_get_drvdata(dev);
if (hdmi && hdmi->hdmi)
dw_hdmi_qp_suspend(dev, hdmi->hdmi);
return 0;
}
If the pointer was freed, does the if (hdmi && hdmi->hdmi) check operate on
freed memory?
>
> connector = drm_bridge_connector_init(drm, encoder);
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260723-dw-hdmi-qp-scramb-v9-0-4fb12ea22ac9@collabora.com?part=25
next prev parent reply other threads:[~2026-07-23 1:48 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 1:34 [PATCH v9 00/61] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 01/61] video/hdmi: Introduce HDMI version enum Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 02/61] drm/display: hdmi: Rename drmm_connector_hdmi_init() to *_ini2() Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 03/61] drm/connector: Add drmm_connector_hdmi_init() with new signature Cristian Ciocaltea
2026-07-23 1:53 ` sashiko-bot
2026-07-23 1:34 ` [PATCH v9 04/61] drm/display: bridge_connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-07-23 1:50 ` sashiko-bot
2026-07-23 1:34 ` [PATCH v9 05/61] drm/connector: Add HDMI 2.0 scrambler infrastructure Cristian Ciocaltea
2026-07-23 1:51 ` sashiko-bot
2026-07-23 1:34 ` [PATCH v9 06/61] drm/display: scdc-helper: Add macro for connector-prefixed debug messages Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 07/61] drm/display: scdc-helper: Add helper to set SCDC version information Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 08/61] drm/display: hdmi: Add HDMI 2.0 scrambling management helpers Cristian Ciocaltea
2026-07-23 1:51 ` sashiko-bot
2026-07-23 1:34 ` [PATCH v9 09/61] drm/display: hdmi: Advertise SCDC source version when scrambling Cristian Ciocaltea
2026-07-23 1:34 ` [PATCH v9 10/61] drm/bridge: Remove redundant error check in drm_bridge_helper_reset_crtc() Cristian Ciocaltea
2026-07-23 1:47 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 11/61] drm/bridge: Add bridge ops for source-side HDMI 2.0 scrambling Cristian Ciocaltea
2026-07-23 1:47 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 12/61] drm/display: bridge_connector: Use cached connector status in .get_modes() Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 13/61] drm/display: bridge_connector: Switch to .detect_ctx() connector helper Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 14/61] drm/display: bridge_connector: Wire up HDMI 2.0 scrambler callbacks Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 15/61] drm/display: hdmi-state-helper: Add source TMDS rate validation Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 16/61] drm/display: hdmi-state-helper: Pass acquire ctx to hotplug helpers Cristian Ciocaltea
2026-07-23 1:51 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 17/61] drm/display: hdmi-state-helper: Sync SCDC state on hotplug Cristian Ciocaltea
2026-07-23 1:53 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 18/61] drm/display: hdmi-state-helper: Set HDMI scrambling requirement Cristian Ciocaltea
2026-07-23 1:50 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 19/61] drm/bridge: dw-hdmi-qp: Rate limit i2c read error messages Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 20/61] drm/bridge: dw-hdmi-qp: Provide .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-07-23 1:52 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 21/61] drm/bridge: dw-hdmi-qp: Remove unused workqueue include and define Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 22/61] drm/bridge: dw-hdmi-qp: Add HDMI 2.0 scrambling support Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 23/61] drm/bridge: dw-hdmi-qp: Provide dw_hdmi_qp_hpd_notify() helper Cristian Ciocaltea
2026-07-23 1:49 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 24/61] drm/rockchip: dw_hdmi_qp: Fix NULL deref in PM ops on incomplete bind Cristian Ciocaltea
2026-07-23 1:48 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 25/61] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages Cristian Ciocaltea
2026-07-23 1:48 ` sashiko-bot [this message]
2026-07-23 1:35 ` [PATCH v9 26/61] drm/rockchip: dw_hdmi_qp: Use local dev variable consistently in bind() Cristian Ciocaltea
2026-07-23 1:49 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 27/61] drm/rockchip: dw_hdmi_qp: Avoid spurious HPD IRQ thread wakeups Cristian Ciocaltea
2026-07-23 1:51 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 28/61] drm/rockchip: dw_hdmi_qp: Mask RK3576 HPD IRQ in io_init Cristian Ciocaltea
2026-07-23 1:55 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 29/61] drm/rockchip: dw_hdmi_qp: Implement .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-07-23 1:57 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 30/61] drm/rockchip: dw_hdmi_qp: Factor out HPD interrupt (un)mask helpers Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 31/61] drm/rockchip: dw_hdmi_qp: Control the HPD IRQ line via the bridge HPD ops Cristian Ciocaltea
2026-07-23 1:59 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 32/61] drm/rockchip: dw_hdmi_qp: Use dw_hdmi_qp_hpd_notify() for HPD reports Cristian Ciocaltea
2026-07-23 1:58 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 33/61] drm/bridge: dw-hdmi-qp: Drop unused .setup_hpd() phy op Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 34/61] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 35/61] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 36/61] drm/vc4: hdmi: Propagate -EDEADLK to the top level Cristian Ciocaltea
2026-07-23 1:59 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 37/61] drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 38/61] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 39/61] drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 40/61] drm/bridge: adv7511: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 41/61] drm/bridge: inno-hdmi: " Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 42/61] drm/bridge: ite-it6263: Drop redundant .mode_valid hook Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 43/61] drm/bridge: ite-it6263: Advertise HDMI 1.3 capabilities Cristian Ciocaltea
2026-07-23 2:01 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 44/61] drm/bridge: ite-it66121: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 45/61] drm/bridge: lontium-lt9611: Advertise HDMI 1.4 capabilities Cristian Ciocaltea
2026-07-23 2:00 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 46/61] drm/rockchip: rk3066_hdmi: " Cristian Ciocaltea
2026-07-23 1:57 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 47/61] drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 48/61] drm/tests: edid: Add 4K@60Hz EDID with 600MHz TMDS Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 49/61] drm/tests: edid: Fix conformity for 1080p+4K YUV420 200MHz EDID Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 50/61] drm/tests: edid: Fix conformity for 4K RGB/YUV 340MHz EDID Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 51/61] drm/tests: bridge: Set supported HDMI version Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 52/61] drm/tests: connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 53/61] drm/tests: connector: Add HDMI max_tmds_char_rate init coverage Cristian Ciocaltea
2026-07-23 1:58 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 54/61] drm/tests: connector: Add HDMI source-side scrambler coverage Cristian Ciocaltea
2026-07-23 2:00 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 55/61] drm/tests: hdmi_state_helper: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-07-23 2:03 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 56/61] drm/tests: hdmi_state_helper: Add connector-provided max_tmds_char_rate coverage Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 57/61] drm/tests: hdmi_state_helper: Cover source-side scrambling decision Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 58/61] drm/connector: Remove drmm_connector_hdmi_ini2() Cristian Ciocaltea
2026-07-23 2:01 ` sashiko-bot
2026-07-23 1:35 ` [PATCH v9 59/61] drm/connector: Drop redundant hdmi vendor/product fields Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 60/61] drm/connector: Drop redundant hdmi supported_formats field Cristian Ciocaltea
2026-07-23 1:35 ` [PATCH v9 61/61] drm/connector: Drop redundant max_bpc field Cristian Ciocaltea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723014836.C4D601F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox