From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pz2-f42.google.com (mail-pz2-f42.google.com [74.125.228.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BFF4138E5DF for ; Thu, 1 Oct 2026 02:24:55 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.228.42 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790821497; cv=none; b=MnBS1esWxPkh6IBP/08jomiEyDZ6MbPTcGHDEhRTz7rGFJel88UfA4vsUnjSFRhAYIctb65NeVL0bTdRzJTxPgBA42n4Rbbq6RAs8R2giHKtY52cBxg7SO/ye9+mfo6LvV7Fxbt07gCKtZNjHt6IJUNrlsh9IALILn/rZfIYV2w= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790821497; c=relaxed/simple; bh=iu0X4mDo4HWEYn0iToi6ZMNOaxHbVyJejjaCuucm7rc=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ImnTm6hvvoHgPlkvoaNhWj99aoavMPIK6HAVVaTKJ8HdeA+wNDWjeDDMLjSfs50b1w9Zk7hKxYE4TF4K8w1nyrfjR/kiZ17JIC6eo24T7L9gcvGNmmbNtOudXeua85IMqJNyBmbohC0821yN5OYwT1DgBTld0SFt/HresgoStEU= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=lcTtxfFb; arc=none smtp.client-ip=74.125.228.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="lcTtxfFb" Received: by mail-pz2-f42.google.com with SMTP id 41be03b00d2f7-cc4d04d740cso2296692a12.0 for ; Wed, 30 Sep 2026 19:24:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1790821495; x=1791426295; darn=lists.linux.dev; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=zxg0mQeibUEA7aHAxfrcW/DbAaTwXdm7MXT8cX4qy1Y=; b=lcTtxfFboO2soz7gArb9G9CCgA5tNsfp8t8JP8BmnMNqh71m9Gy2btgRmcxu7dq0wE CB/EX9y/OA3h9p/jDSpUj89iVMDSictYerICdfJUrI2rL5DNMIAxiQiQ1qDch7ozU+dQ NcH1w5J7pKTyA3oecgBEnHTj6+zt1PAjsWSXgRWg6GYMLP2NFuxPABdN27nheHDLVrou ODy28ljNxwA9BvIEeSMH1IAfNk7qAmt+9YLPiNYg0os2SX7TXkAPg7Lbnr089giCQVta +mZSZaqUvxPBIIddYOkxHXEqf++CQVDQUvL62CTxUUcLFTKDZITViRZILGxUJEGiarQe jCaw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1790821495; x=1791426295; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=zxg0mQeibUEA7aHAxfrcW/DbAaTwXdm7MXT8cX4qy1Y=; b=RKvsIU15I8TkSShkCrp3gbNlKQQRIsYpvN5fu9fslxRvQVuNZHLgXFEnQbjhKnqIRp wv7ubfjeVIzLfhyo7RZUtU1MX688hWch4g0XMemTJoeJBngQv42dhdHWV9h4njsFKo1T g/GjVkfYhJqvFu7p4dbVLi9RMV9oWaX7Q7LsTXWI2wuFHIORrW0IRM6x4Eanm+Zu/ZXo jihGvcrWAYmqsy+zh7EVpINDwshETXFHa4Sdqs1rHmsqlvadFj7do4D4nPFNidiTlEho WLn/Zk/lYWLxB2Wop15Tfn1BlMNweyu3Bu26R24wouC6s7UM5oKOBSq4RHqKubqQPcFl XRMg== X-Forwarded-Encrypted: i=1; AKwUvBxKAhGv81j1Apoqz6gyEWKivwmvJbv3Bv9VvzdHMu6sK7a1C/DWLz+tFDe2XOm5KkjiveddgjOmCChv0g==@lists.linux.dev X-Gm-Message-State: AFq9FYIlAvfjTqf6DSXm7PSUbYk37caTpDmz22lrfVfWGgoGyPhW2RTI d2GB42N/PbDHZnyvDaLSbFhM2rWPQlHZj7/4BJET9Q3hcG0IBydXYJF5 X-Gm-Gg: AYBFou2FY3C/E73Mz8M+IEM04R4QI3I8uNYtp+yL8+tvlvGl4mGhiNUm/YQRthxRoCf CVzssjpoyFrkpmDOog+rKlKrH+9UxEnAq4YWTQsiUTcxrJFvZE1OJiTtOYC2w4w7NYuDSmM811l y0nQ1oIjLx/kccZgXwIrMgldazu3ZIyLz/vh5V8cb9Z1DLrsE7CV4j6o/I++U8iPMABvJ39l9vR PqIjjvMOb5UQnTFnKPKN6cwx/p/HT/PzmFVnbUR1beZeatWnkKFYa7tjyeQEDYcmKVkrWCePJTr H+Gahnnbv3jmXx6y/HxA9IV/8jEkouDEnaJs/gTXBxTevoIO0jjFHaKjeClAFwIj4n0rqycCgRV +8nuy/6p+yGcRsZ5gzKI8NR9YsHPTDV3qnNRgovwka8R57Z4xWCAxckrEwgtK0f7uKu5RmMk9mJ klijhxGg7NLg3mHCJ8l2Jm812GndzIxcQJMjySd0QG/w4qcsKyk2yyB3th1AMW6Q== X-Received: by 2002:a17:90b:5808:b0:39e:6c69:f470 with SMTP id 98e67ed59e1d1-3a4d18abe8bmr2771770a91.47.1790821494738; Wed, 30 Sep 2026 19:24:54 -0700 (PDT) Received: from archlinux ([212.192.12.80]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-3a4f43a12c9sm2153230a91.2.2026.09.30.19.24.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 30 Sep 2026 19:24:54 -0700 (PDT) From: Mikhail Kalashnikov To: Chen-Yu Tsai , Jernej Skrabec , Samuel Holland Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Andre Przywara Subject: [PATCH v2 4/4] arm64: dts: allwinner: add Teclast P85T tablet Date: Thu, 1 Oct 2026 10:24:15 +0800 Message-ID: <20261001022415.913959-5-iuncuim@gmail.com> X-Mailer: git-send-email 2.55.0 In-Reply-To: <20261001022415.913959-1-iuncuim@gmail.com> References: <20261001022415.913959-1-iuncuim@gmail.com> Precedence: bulk X-Mailing-List: linux-sunxi@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit The Teclast P85T is an 8-inch tablet that was announced in 2023 based on the Allwinner A523 (sun55i) SoC. Hardware summary: - Allwinner A523, 8x Cortex-A55 (2 clusters) - 4 GiB LPDDR3 DRAM - 64 GiB eMMC - microSD card slot - AXP717 and AXP323 PMICs - USB-C port wired to the USB2 OTG controller - combined WiFi and Bluetooth module based on AIC8800 (SDIO+UART) - 800x1280 MIPI-DSI panel (no mainline binding yet) - Silead GSL1680 touchscreen - MiraMEMS DA280 accelerometer - AXP717 battery/charger - USB-C OTG port (also for charging) - secure boot, but takes any key This initial submission enables only what mainline supports today: both PMICs, battery/charger, GPU (Panfrost), eMMC, SD card, SDIO WiFi (can be used with out of tree driver), USB device (without otg function), UART0 console, UART1 Bluetooth, I2C0 touchscreen, I2C1 accelerometer and the RTC with the external 32 kHz oscillator. Display (DE/TCON/DSI), PWM backlight, audio codec, camera (CSI/VIN) and LRADC keys are deliberately left out, as those blocks don't have a binding yet. The tablet uses secure boot, so it needs a signed TOC0 wrapped image to boot, but it has no key hash burnt into the efuses, so it accepts an image signed with any key. U-Boot support in progress. Later, a tablet with an Allwinner A537 processor and 3 GB of DRAM was released under the same name. This version is not supported by mainline. Assisted-by: OpenCode:DeepSeek-V4.1-Flash Signed-off-by: Mikhail Kalashnikov --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun55i-a523-teclast-p85t.dts | 386 ++++++++++++++++++ 2 files changed, 387 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index aa21f58a4..7025ba959 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a523-teclast-p85t.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts b/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts new file mode 100644 index 000000000..d144f81d8 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2026 Mikhail Kalashnikov + */ + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include +#include + +/ { + model = "Teclast P85T"; + compatible = "teclast,p85t", "allwinner,sun55i-a523"; + chassis-type = "tablet"; + + aliases { + serial0 = &uart0; + }; + + battery: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <800000>; + voltage-max-design-microvolt = <4400000>; + charge-full-design-microamp-hours = <5000000>; + energy-full-design-microwatt-hours = <19250000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the USB-C connector */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vmmc1: vmmc1 { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_aldo3>; + gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + enable-active-high; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */ + post-power-on-delay-ms = <200>; + }; +}; + +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <7 9 IRQ_TYPE_EDGE_FALLING>; /* PH9 */ + power-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + touchscreen-size-x = <1786>; + touchscreen-size-y = <1128>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + silead,max-fingers = <5>; + avdd-supply = <®_cldo2>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + accelerometer@26 { + compatible = "miramems,da280"; + reg = <0x26>; + interrupt-parent = <&pio>; + interrupts = <7 11 IRQ_TYPE_LEVEL_LOW>; /* PH11 */ + }; +}; + +&mmc0 { + vmmc-supply = <®_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vmmc1>; + vqmmc-supply = <®_bldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_cldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_cldo1>; + vcc-pf-supply = <®_cldo3>; + vcc-pg-supply = <®_bldo1>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + axp717_adc: adc { + compatible = "x-powers,axp717-adc"; + #io-channel-cells = <1>; + }; + + battery-power { + compatible = "x-powers,axp717-battery-power-supply"; + monitored-battery = <&battery>; + }; + + regulators { + /* Supplies the "little" cluster (1.0(?) GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1260000>; + regulator-max-microvolt = <1260000>; + regulator-name = "vdd-dram"; + }; + + reg_aldo1: aldo1 { + /* camera sensor AVDD */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; + }; + + reg_aldo2: aldo2 { + /* camera sensor IOVDD */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "iovdd-csi"; + }; + + reg_aldo3: aldo3 { + /* + * supplies the I2C pins for this PMIC + * and the WiFi module + */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-pm"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + /* WiFi module 1.8V */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-wifi-1v8"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1v8"; + }; + + reg_bldo3: bldo3 { + /* camera sensor DVDD/cameravdd */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-csi"; + }; + + reg_bldo4: bldo4 { + /* camera sensor DVDD */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dvdd-csi"; + }; + + reg_cldo1: cldo1 { + /* codec CPVIN, SD/eMMC 1.8V IO */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-codec-mmc"; + }; + + reg_cldo2: cldo2 { + /* touch panel supply */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ctp"; + }; + + reg_cldo3: cldo3 { + /* SD/eMMC VMMC, codec VDD, UART0, g-sensor */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc"; + }; + + reg_cldo4: cldo4 { + /* LCD panel supply */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + + usb-power { + compatible = "x-powers,axp717-usb-power-supply"; + input-current-limit-microamp = <1750000>; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* + * ALDO1 (1.8V) and DLDO1 (3.3V) have no consumers, + * although BSP enables them; the board works fine + * with both rails disabled. + */ + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* Some RISC-V management core related voltage */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <®_aldo3>; + */ + vcc-pm-supply = <®_aldo3>; +}; + +&rtc { + clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>, + <&r_ccu CLK_R_AHB>, <&ext_osc32k>; + clock-names = "bus", "hosc", "ahb", "ext-osc32k"; + assigned-clocks = <&rtc CLK_OSC32K>; + assigned-clock-rates = <32768>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + /* Bluetooth HCI, 4-wire with RTS/CTS */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&usb_otg { + /* + * The USB-C port is the primary power supply; VBUS control is not + * wired in mainline (AXP717 has no drivevbus), so the port can only + * act as a USB device powered from the host side. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb0_vbus_det-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + status = "okay"; +}; -- 2.55.0