ARM Sunxi Platform Development
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Andre Przywara <andre.przywara@arm.com>
Cc: u-boot@lists.denx.de, Sumit Garg <sumit.garg@linaro.org>,
	linux-sunxi@lists.linux.dev, Tom Rini <trini@konsulko.com>,
	Simon Glass <sjg@chromium.org>
Subject: Re: [PATCH 1/3] suniv: switch Allwinner F1Cx00 boards to OF_UPSTREAM
Date: Mon, 20 Jan 2025 17:30:12 +0100	[thread overview]
Message-ID: <2763817.mvXUDI8C0e@jernej-laptop> (raw)
In-Reply-To: <20250119234219.1773070e@minigeek.lan>

Dne ponedeljek, 20. januar 2025 ob 00:42:19 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> On Sun, 19 Jan 2025 20:45:43 +0100
> Jernej Škrabec <jernej.skrabec@gmail.com> wrote:
> 
> Hi Jernej,
> 
> > Dne nedelja, 19. januar 2025 ob 17:41:54 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> > > In contrast to some other Allwinner SoCs, there is no difference between
> > > the DTs for the Allwinner F1C100/F1C200 SoCs (sunvi) between the U-Boot
> > > and the Linux kernel repository.
> > > 
> > > Remove the old copies of the F1Cx00 related .dts and .dtsi files, and
> > > switch the whole suniv SoC over to use OF_UPSTREAM.
> > > 
> > > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > > ---
> > >  arch/arm/dts/Makefile                        |   2 -
> > >  arch/arm/dts/suniv-f1c100s-licheepi-nano.dts |  73 ----
> > >  arch/arm/dts/suniv-f1c100s.dtsi              | 330 -------------------
> > >  arch/arm/dts/suniv-f1c200s-lctech-pi.dts     |  76 -----
> > >  arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts |  81 -----
> > >  arch/arm/mach-sunxi/Kconfig                  |   1 +
> > >  configs/lctech_pi_f1c200s_defconfig          |   2 +-
> > >  configs/licheepi_nano_defconfig              |   2 +-
> > >  8 files changed, 3 insertions(+), 564 deletions(-)
> > >  delete mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> > >  delete mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
> > >  delete mode 100644 arch/arm/dts/suniv-f1c200s-lctech-pi.dts
> > >  delete mode 100644 arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts
> > > 
> > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > > index aef0425c967..5627daa94db 100644
> > > --- a/arch/arm/dts/Makefile
> > > +++ b/arch/arm/dts/Makefile
> > > @@ -530,8 +530,6 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
> > >  	stm32h743i-eval.dtb \
> > >  	stm32h750i-art-pi.dtb
> > >  
> > > -dtb-$(CONFIG_MACH_SUNIV) += \
> > > -	suniv-f1c100s-licheepi-nano.dtb
> > >  dtb-$(CONFIG_MACH_SUN4I) += \
> > >  	sun4i-a10-a1000.dtb \
> > >  	sun4i-a10-ba10-tvbox.dtb \
> 
> 
> > > diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> > > deleted file mode 100644
> > > index 43896723a99..00000000000
> > > --- a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> > > +++ /dev/null
> 
>  ....
> 
> > > diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi
> > > deleted file mode 100644
> > > index 3c61d59ab5f..00000000000
> > > --- a/arch/arm/dts/suniv-f1c100s.dtsi
> > > +++ /dev/null
> 
> ...
> 
> > > diff --git a/arch/arm/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/dts/suniv-f1c200s-lctech-pi.dts
> > > deleted file mode 100644
> > > index 2d2a3f026df..00000000000
> > > --- a/arch/arm/dts/suniv-f1c200s-lctech-pi.dts
> > > +++ /dev/null
> 
> ...
> 
> > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > > index 8065161e61e..866b55833c0 100644
> > > --- a/arch/arm/mach-sunxi/Kconfig
> > > +++ b/arch/arm/mach-sunxi/Kconfig
> > > @@ -279,6 +279,7 @@ config MACH_SUNIV
> > >  	select SUPPORT_SPL
> > >  	select SKIP_LOWLEVEL_INIT_ONLY
> > >  	select SPL_SKIP_LOWLEVEL_INIT_ONLY
> > > +	imply OF_UPSTREAM
> > >  
> > >  config MACH_SUN4I
> > >  	bool "sun4i (Allwinner A10)"
> > > diff --git a/configs/lctech_pi_f1c200s_defconfig b/configs/lctech_pi_f1c200s_defconfig
> > > index e1e8d3aaaa3..1588b3b4955 100644
> > > --- a/configs/lctech_pi_f1c200s_defconfig
> > > +++ b/configs/lctech_pi_f1c200s_defconfig
> > > @@ -1,6 +1,6 @@
> > >  CONFIG_ARM=y
> > >  CONFIG_ARCH_SUNXI=y
> > > -CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c200s-lctech-pi"
> > > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/suniv-f1c200s-lctech-pi"  
> > 
> > What's with this board? I don't see it being removed from Makefile. If it
> > is not there, then this board has been broken all along?
> 
> No, all defconfigs build fine, that's tested with CI on every PR merged.
> 
> As it turns out, the build system builds the DTs as listed in the
> CONFIG_DEFAULT_DEVICE_TREE variable, but also in CONFIG_OF_LIST
> automatically, so those lists in the Makefile are actually somewhat
> redundant. I am not entirely sure if there are corner case when they
> are needed, though, but even removing the whole Makefile stanza for
> A64, for instance, builds those boards fine.
> 
> So the LCTech Pi build is fine, both with and without this patch.

Thanks for explanation. This is then:

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> 
> Thanks,
> Andre
> 
> > 
> > Best regards,
> > Jernej
> > 
> > >  CONFIG_SPL=y
> > >  CONFIG_MACH_SUNIV=y
> > >  CONFIG_DRAM_CLK=156
> > > diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig
> > > index d59affb0d9c..051b1901f20 100644
> > > --- a/configs/licheepi_nano_defconfig
> > > +++ b/configs/licheepi_nano_defconfig
> > > @@ -1,6 +1,6 @@
> > >  CONFIG_ARM=y
> > >  CONFIG_ARCH_SUNXI=y
> > > -CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"
> > > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/suniv-f1c100s-licheepi-nano"
> > >  CONFIG_SPL=y
> > >  CONFIG_MACH_SUNIV=y
> > >  CONFIG_DRAM_CLK=156
> > >   
> > 
> > 
> > 
> > 
> > 
> 
> 





  reply	other threads:[~2025-01-20 16:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-19 16:41 [PATCH 0/3] sunxi: switch three SoC families to OF_UPSTREAM Andre Przywara
2025-01-19 16:41 ` [PATCH 1/3] suniv: switch Allwinner F1Cx00 boards " Andre Przywara
2025-01-19 19:45   ` Jernej Škrabec
2025-01-19 23:42     ` Andre Przywara
2025-01-20 16:30       ` Jernej Škrabec [this message]
2025-01-19 16:41 ` [PATCH 2/3] sunxi: switch Allwinner A10 " Andre Przywara
2025-01-19 16:41 ` [PATCH 3/3] sunxi: switch Allwinner A10s/A13 " Andre Przywara
2025-01-19 19:55 ` [PATCH 0/3] sunxi: switch three SoC families " Jernej Škrabec
2025-01-22  6:33 ` Sumit Garg
2025-01-22 11:19   ` Andre Przywara
2025-01-22 12:29     ` Sumit Garg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2763817.mvXUDI8C0e@jernej-laptop \
    --to=jernej.skrabec@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=sjg@chromium.org \
    --cc=sumit.garg@linaro.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox