From: Frank Oltmanns <frank@oltmanns.dev>
To: "Jernej Škrabec" <jernej.skrabec@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>,
Roman Beranek <me@crly.cz>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 02/11] clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
Date: Sun, 06 Aug 2023 15:57:00 +0200 [thread overview]
Message-ID: <87h6pc9sur.fsf@oltmanns.dev> (raw)
In-Reply-To: <3752134.kQq0lBPeGt@jernej-laptop>
On 2023-08-06 at 15:32:29 +0200, Jernej Škrabec <jernej.skrabec@gmail.com> wrote:
> Dne nedelja, 06. avgust 2023 ob 15:06:47 CEST je Frank Oltmanns napisal(a):
>> In case the CLK_SET_RATE_PARENT flag is set, consider using a different
>> parent rate when determining a new rate.
>>
>> To find the best match for the requested rate, perform the following
>> steps for each NKM combination:
>> - calculate the optimal parent rate,
>> - find the best parent rate that the parent clock actually supports
>> - use that parent rate to calculate the effective rate.
>>
>> In case the clk does not support setting the parent rate, use the same
>> algorithm as before.
>>
>> Acked-by: Maxime Ripard <mripard@kernel.org>
>> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
>> ---
>> drivers/clk/sunxi-ng/ccu_nkm.c | 45
>> +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 44
>> insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
>> index f267142e58b3..ea1b77e9b57f 100644
>> --- a/drivers/clk/sunxi-ng/ccu_nkm.c
>> +++ b/drivers/clk/sunxi-ng/ccu_nkm.c
>> @@ -6,6 +6,7 @@
>>
>> #include <linux/clk-provider.h>
>> #include <linux/io.h>
>> +#include <linux/math.h>
>
> Why do you need above include?
It's not needed. It's a leftover from an earlier version. I'll remove it
in v6.
Thank you for your review,
Frank
>
> Best regards,
> Jernej
>
>>
>> #include "ccu_gate.h"
>> #include "ccu_nkm.h"
>> @@ -16,6 +17,45 @@ struct _ccu_nkm {
>> unsigned long m, min_m, max_m;
>> };
>>
>> +static unsigned long ccu_nkm_find_best_with_parent_adj(struct clk_hw
>> *parent_hw, +
> unsigned long *parent, unsigned long rate,
>> +
> struct _ccu_nkm *nkm)
>> +{
>> + unsigned long best_rate = 0, best_parent_rate = *parent, tmp_parent
> =
>> *parent; + unsigned long best_n = 0, best_k = 0, best_m = 0;
>> + unsigned long _n, _k, _m;
>> +
>> + for (_k = nkm->min_k; _k <= nkm->max_k; _k++) {
>> + for (_n = nkm->min_n; _n <= nkm->max_n; _n++) {
>> + for (_m = nkm->min_m; _m <= nkm->max_m; _m++)
> {
>> + unsigned long tmp_rate;
>> +
>> + tmp_parent =
> clk_hw_round_rate(parent_hw, rate * _m / (_n * _k));
>> +
>> + tmp_rate = tmp_parent * _n * _k /
> _m;
>> + if (tmp_rate > rate)
>> + continue;
>> +
>> + if ((rate - tmp_rate) < (rate -
> best_rate)) {
>> + best_rate = tmp_rate;
>> + best_parent_rate =
> tmp_parent;
>> + best_n = _n;
>> + best_k = _k;
>> + best_m = _m;
>> + }
>> + }
>> + }
>> + }
>> +
>> + nkm->n = best_n;
>> + nkm->k = best_k;
>> + nkm->m = best_m;
>> +
>> + *parent = best_parent_rate;
>> +
>> + return best_rate;
>> +}
>> +
>> static unsigned long ccu_nkm_find_best(unsigned long parent, unsigned long
>> rate, struct _ccu_nkm *nkm)
>> {
>> @@ -124,7 +164,10 @@ static unsigned long ccu_nkm_round_rate(struct
>> ccu_mux_internal *mux, if (nkm->common.features &
>> CCU_FEATURE_FIXED_POSTDIV)
>> rate *= nkm->fixed_post_div;
>>
>> - rate = ccu_nkm_find_best(*parent_rate, rate, &_nkm);
>> + if (!clk_hw_can_set_rate_parent(&nkm->common.hw))
>> + rate = ccu_nkm_find_best(*parent_rate, rate, &_nkm);
>> + else
>> + rate = ccu_nkm_find_best_with_parent_adj(parent_hw,
> parent_rate, rate,
>> &_nkm);
>>
>> if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>> rate /= nkm->fixed_post_div;
next prev parent reply other threads:[~2023-08-06 13:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-06 13:06 [PATCH v5 00/11] clk: sunxi-ng: Consider alternative parent rates when determining NKM clock rate Frank Oltmanns
2023-08-06 13:06 ` [PATCH v5 01/11] clk: sunxi-ng: nkm: Use correct parameter name for parent HW Frank Oltmanns
2023-08-06 13:31 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 02/11] clk: sunxi-ng: nkm: consider alternative parent rates when determining rate Frank Oltmanns
2023-08-06 13:32 ` Jernej Škrabec
2023-08-06 13:57 ` Frank Oltmanns [this message]
2023-08-06 13:06 ` [PATCH v5 03/11] clk: sunxi-ng: a64: allow pll-mipi to set parent's rate Frank Oltmanns
2023-08-06 13:32 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 04/11] clk: sunxi-ng: Add feature to find closest rate Frank Oltmanns
2023-08-06 13:33 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 05/11] clk: sunxi-ng: Add helper function " Frank Oltmanns
2023-08-06 13:41 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 06/11] clk: sunxi-ng: nm: Support finding " Frank Oltmanns
2023-08-06 13:42 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 07/11] clk: sunxi-ng: nkm: " Frank Oltmanns
2023-08-06 13:42 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 08/11] clk: sunxi-ng: mux: " Frank Oltmanns
2023-08-06 13:42 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 09/11] clk: sunxi-ng: div: " Frank Oltmanns
2023-08-06 13:42 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 10/11] clk: sunxi-ng: a64: select closest rate for pll-video0 Frank Oltmanns
2023-08-06 13:48 ` Jernej Škrabec
2023-08-06 13:06 ` [PATCH v5 11/11] clk: sunxi-ng: nkm: Prefer current parent rate Frank Oltmanns
2023-08-06 13:43 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h6pc9sur.fsf@oltmanns.dev \
--to=frank@oltmanns.dev \
--cc=andre.przywara@arm.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=me@crly.cz \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).