Re: [PATCH] arm64: dts: sun50i-a64-pinephone: Add mount matrix for accelerometer

[Andrey Skvortsov <andrej.skvortzov@gmail.com>]

Hi Dragan,


On 24-09-18 16:41, Andrey Skvortsov wrote:
> On 24-09-18 13:27, Dragan Simic wrote:

> > > In device tree mount-matrix documentation [3] there is
> > > 
> > >  users would likely expect a value of 9.81 m/s^2 upwards along the (z)
> > >  axis, i.e. out of the screen when the device is held with its screen
> > >  flat on the planets surface.
> > > 
> 
> how I read kernel documentation.

Hm, I think I misunderstand this part in kernel
documentation and you were correct.

> Picture 2.
> 
> up
> 
>      +--------+ 
>      !        ! 
>      ++++++++++ 
>          !      
>          !      
>          v      
>        gravity, Z
> 
> down
> 
> Screen (drawn as ++++++++++) is looking downwards ("its screen flat on
> the planets surface"). Gravity and Z axis point into the same
> direction and it's expected to read positive value.


Sorry, for the noise.


> Actually, unless my analysis is proven wrong, perhaps it would
> be better if I'd submit this patch in its final form, because it
> has diverged a lot from the original patch.  IIUC, Ondrej only
> imported the original patch from somewhere, without some kind of
> proper attribution. [4]

please, submit your version of this patch. I'd be glad to review it (I
think, I've already did)

>> [1] https://rimgo.reallyaweso.me/vrBXQPq.png
>> [2] https://rimgo.reallyaweso.me/uTmT1pr.png
>> [3] https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/mount-matrix.txt

> [4] https://xff.cz/kernels/6.9/patches/0221-arm64-dts-sun50i-a64-pinephone-Add-mount-matrix-for-.patch


-- 
Best regards,
Andrey Skvortsov