[PATCH v8 00/10] Support ROHM BD79124 ADC

[PATCH v8 00/10] Support ROHM BD79124 ADC

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 5824 bytes --]

Support ROHM BD79124 ADC.

This series adds also couple of IIO ADC helper functions for parsing the
channel information from the device tree. There are also new helpers
included for iterating and counting firmware child nodes with a specific
name.

Series does also convert couple of drivers to use these helpers. The
rzg2l_adc and the sun20i-gpadc are converted to use the new ADC helper.

The gianfar driver under net and the thp7312 under media/i2c are added as
first users of the newly added "named child node" -helpers.

There has been some discussion about how useful these ADC helpers are,
and whether they should support also differential and single ended channel
configurations. This version does not include support for those - with the
benefit of reduced complexity and easier to use API.

NOTE: Patches 4,5,9 and 10 are untested as I lack of relevant HW.
They have been compile tested only.

The ROHM BD79124 ADC itself is quite usual stuff. 12-bit, 8-channel ADC
with threshold monitoring.

Except that:
 - each ADC input pin can be configured as a general purpose output.
 - manually starting an ADC conversion and reading the result would
   require the I2C _master_ to do clock stretching(!) for the duration
   of the conversion... Let's just say this is not well supported.
 - IC supports 'autonomous measurement mode' and storing latest results
   to the result registers. This mode is used by the driver due to the
   "peculiar" I2C when doing manual reads.

Furthermore, the ADC uses this continuous autonomous measuring,
and the IC keeps producing new 'out of window' IRQs if measurements are
out of window - the driver disables the event for 1 seconds when sending
it to user. This prevents generating storm of events

Revision history:

v7 => v8:
  property helpers:
    - Fix the example in fwnode_get_named_child_node_count() documentation
      to use the fwnode_get_named_child_node_count() and not the
      device_get_named_child_node_count()
    - Fix the rest of the new macro's indentiations
  adc helpers:
    - Treat 0 ADC channels as an error in
      devm_iio_adc_device_alloc_chaninfo_se().
  rzg2l_adc / sun20i-gpadc:
    - Drop zero channels check from the ADC drivers using
      devm_iio_adc_device_alloc_chaninfo_se()
  BD79124:
    - Use unsigned for regmap values
    - Commit message fine tuning
    - Check devm_mutex_init() return value
    - Handle 'ALL pins as ADC or GPO' cleanly in BD79124 driver
    - BD79124 styling / typofixes

v6 => v7:
 - Inline device_get_named_child_node_count()
 - Fix kernel-doc for fwnode_get_named_child_node_count()
 - Minor styling fixes
 More accurate changelog in individual patches.

v5 => v6:
 - Drop applied patch
 - Add *_for_each_named_child_* iterators
 - Add a patch converting the thp7312 driver to use the new helper
 - Styling and minor things pointed by reviewers

v4 => v5: Fixes as per various review comments. Most notably:
 - Drop the patch making the TI's ADC driver to respect device tree.
 - Add (RFC) patch converting gianfar driver to use new name child-node
   counting API as suggested by Andy.
 - Add fwnode_get_child_node_count_named() as suggested by Rob.
 - rebase to v6.14-rc5
 More accurate changelog in individual patches.

v3 => v4:
 - Drop the ADC helper support for differential channels
 - Drop the ADC helper for getting only channel IDs by fwnode.
 - "Promote" the function counting the number of child nodes with a
   specific name to the property.h (As suggested by Jonathan).
 - Add ADC helpers to a namespace.
 - Rebase on v6.14-rc3
 - More minor changes described in individual patches.

v2 => v3:
 - Restrict BD79124 channel numbers as suggested by Conor and add
   Conor's Reviewed-by tag.
 - Support differential and single-ended inputs
 - Convert couple of existing drivers to use the added ADC helpers
 - Minor fixes based on reviews
Link to v2:
https://lore.kernel.org/all/cover.1738761899.git.mazziesaccount@gmail.com/

RFC v1 => v2:
 - Drop MFD and pinmux.
 - Automatically re-enable events after 1 second.
 - Export fwnode parsing helpers for finding the ADC channels.

---

Matti Vaittinen (10):
  dt-bindings: ROHM BD79124 ADC/GPO
  property: Add functions to iterate named child
  iio: adc: add helpers for parsing ADC nodes
  iio: adc: rzg2l_adc: Use adc-helpers
  iio: adc: sun20i-gpadc: Use adc-helpers
  iio: adc: Support ROHM BD79124 ADC
  MAINTAINERS: Add IIO ADC helpers
  MAINTAINERS: Add ROHM BD79124 ADC/GPO
  net: gianfar: Use device_get_child_node_count_named()
  media: thp7312: Use helper for iterating named child nodes

 .../bindings/iio/adc/rohm,bd79124.yaml        |  114 ++
 MAINTAINERS                                   |   12 +
 drivers/base/property.c                       |   27 +
 drivers/iio/adc/Kconfig                       |   17 +
 drivers/iio/adc/Makefile                      |    3 +
 drivers/iio/adc/industrialio-adc.c            |   82 ++
 drivers/iio/adc/rohm-bd79124.c                | 1138 +++++++++++++++++
 drivers/iio/adc/rzg2l_adc.c                   |   39 +-
 drivers/iio/adc/sun20i-gpadc-iio.c            |   39 +-
 drivers/media/i2c/thp7312.c                   |    8 +-
 drivers/net/ethernet/freescale/gianfar.c      |   17 +-
 include/linux/iio/adc-helpers.h               |   27 +
 include/linux/property.h                      |   24 +
 13 files changed, 1481 insertions(+), 66 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
 create mode 100644 drivers/iio/adc/industrialio-adc.c
 create mode 100644 drivers/iio/adc/rohm-bd79124.c
 create mode 100644 include/linux/iio/adc-helpers.h


base-commit: 7eb172143d5508b4da468ed59ee857c6e5e01da6
-- 
2.48.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v8 03/10] iio: adc: add helpers for parsing ADC nodes

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 6527 bytes --]

There are ADC ICs which may have some of the AIN pins usable for other
functions. These ICs may have some of the AIN pins wired so that they
should not be used for ADC.

(Preferred?) way for marking pins which can be used as ADC inputs is to
add corresponding channels@N nodes in the device tree as described in
the ADC binding yaml.

Add couple of helper functions which can be used to retrieve the channel
information from the device node.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---
Revision history:
v7 => v8:
 devm_iio_adc_device_alloc_chaninfo_se():
 - Treat all negative values for the max ID as 'don't care'
 - Return -ENOENT instead of '0' if no channels were found.
v5 => v6:
 - Adapt to changed fwnode helper names
 - Fix spelling
v4 => v5:
 - Inline iio_adc_device_num_channels()
 - Fix Indenting function parameters
 - Combine the max channel ID checks.
v3 => v4:
 - Drop diff-channel support
 - Drop iio_adc_device_channels_by_property()
 - Add IIO_DEVICE namespace
 - Move industrialio-adc.o to top of the Makefile
 - Some styling as suggested by Andy
 - Re-consider included headers
v2 => v3: Mostly based on review comments by Jonathan
 - Support differential and single-ended channels
 - Rename iio_adc_device_get_channels() as
   iio_adc_device_channels_by_property()
 - Improve spelling
 - Drop support for cases where DT comes from parent device's node
 - Decrease loop indent by reverting node name check conditions
 - Don't set 'chan->indexed' by number of channels to keep the
   interface consistent no matter how many channels are connected.
 - Fix ID range check and related comment
RFC v1 => v2:
 - New patch
---
 drivers/iio/adc/Kconfig            |  3 ++
 drivers/iio/adc/Makefile           |  2 +
 drivers/iio/adc/industrialio-adc.c | 82 ++++++++++++++++++++++++++++++
 include/linux/iio/adc-helpers.h    | 27 ++++++++++
 4 files changed, 114 insertions(+)
 create mode 100644 drivers/iio/adc/industrialio-adc.c
 create mode 100644 include/linux/iio/adc-helpers.h

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 849c90203071..37b70a65da6f 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -6,6 +6,9 @@
 
 menu "Analog to digital converters"
 
+config IIO_ADC_HELPER
+	tristate
+
 config AB8500_GPADC
 	bool "ST-Ericsson AB8500 GPADC driver"
 	depends on AB8500_CORE && REGULATOR_AB8500
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ee19afba62b7..1c410f483029 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO ADC drivers
 #
 
+obj-$(CONFIG_IIO_ADC_HELPER) += industrialio-adc.o
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
diff --git a/drivers/iio/adc/industrialio-adc.c b/drivers/iio/adc/industrialio-adc.c
new file mode 100644
index 000000000000..b4057230e749
--- /dev/null
+++ b/drivers/iio/adc/industrialio-adc.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Helpers for parsing common ADC information from a firmware node.
+ *
+ * Copyright (c) 2025 Matti Vaittinen <mazziesaccount@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/types.h>
+
+#include <linux/iio/adc-helpers.h>
+#include <linux/iio/iio.h>
+
+/**
+ * devm_iio_adc_device_alloc_chaninfo_se - allocate and fill iio_chan_spec for ADC
+ *
+ * Scan the device node for single-ended ADC channel information. Channel ID is
+ * expected to be found from the "reg" property. Allocate and populate the
+ * iio_chan_spec structure corresponding to channels that are found. The memory
+ * for iio_chan_spec structure will be freed upon device detach.
+ *
+ * @dev:		Pointer to the ADC device.
+ * @template:		Template iio_chan_spec from which the fields of all
+ *			found and allocated channels are initialized.
+ * @max_chan_id:	Maximum value of a channel ID. Use negative value if no
+ *			checking is required.
+ * @cs:			Location where pointer to allocated iio_chan_spec
+ *			should be stored.
+ *
+ * Return:	Number of found channels on success. Negative value to indicate
+ *		failure. Specifically, -ENOENT if no channel nodes were found.
+ */
+int devm_iio_adc_device_alloc_chaninfo_se(struct device *dev,
+					  const struct iio_chan_spec *template,
+					  int max_chan_id,
+					  struct iio_chan_spec **cs)
+{
+	struct iio_chan_spec *chan_array, *chan;
+	int num_chan, ret;
+
+	num_chan = iio_adc_device_num_channels(dev);
+	if (num_chan < 0)
+		return num_chan;
+
+	if (!num_chan)
+		return -ENOENT;
+
+	chan_array = devm_kcalloc(dev, num_chan, sizeof(*chan_array),
+				  GFP_KERNEL);
+	if (!chan_array)
+		return -ENOMEM;
+
+	chan = &chan_array[0];
+
+	device_for_each_named_child_node_scoped(dev, child, "channel") {
+		u32 ch;
+
+		ret = fwnode_property_read_u32(child, "reg", &ch);
+		if (ret)
+			return ret;
+
+		if (max_chan_id >= 0 && ch > max_chan_id)
+			return -ERANGE;
+
+		*chan = *template;
+		chan->channel = ch;
+		chan++;
+	}
+
+	*cs = chan_array;
+
+	return num_chan;
+}
+EXPORT_SYMBOL_NS_GPL(devm_iio_adc_device_alloc_chaninfo_se, "IIO_DRIVER");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matti Vaittinen <mazziesaccount@gmail.com>");
+MODULE_DESCRIPTION("IIO ADC fwnode parsing helpers");
diff --git a/include/linux/iio/adc-helpers.h b/include/linux/iio/adc-helpers.h
new file mode 100644
index 000000000000..56b092a2a4c4
--- /dev/null
+++ b/include/linux/iio/adc-helpers.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * The industrial I/O ADC firmware property parsing helpers
+ *
+ * Copyright (c) 2025 Matti Vaittinen <mazziesaccount@gmail.com>
+ */
+
+#ifndef _INDUSTRIAL_IO_ADC_HELPERS_H_
+#define _INDUSTRIAL_IO_ADC_HELPERS_H_
+
+#include <linux/property.h>
+
+struct device;
+struct iio_chan_spec;
+
+static inline int iio_adc_device_num_channels(struct device *dev)
+{
+	return device_get_named_child_node_count(dev, "channel");
+}
+
+int devm_iio_adc_device_alloc_chaninfo_se(struct device *dev,
+					  const struct iio_chan_spec *template,
+					  int max_chan_id,
+					  struct iio_chan_spec **cs);
+
+#endif /* _INDUSTRIAL_IO_ADC_HELPERS_H_ */
-- 
2.48.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v8 05/10] iio: adc: sun20i-gpadc: Use adc-helpers

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 5225 bytes --]

The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.

The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the sun20i-gpadc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the in-tree .dts seem to have
channel IDs between 0..num of channels.

Use the new helper.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---
NOTE: This change now drops a print "no channel children" which used to
be printed if no channel nodes were found. It also changes the return
value from -ENODEV to -ENOENT.

Revision history:
v7 => v8:
 - drop explicit "no channels check". It is now done inside the
   devm_iio_adc_device_alloc_chaninfo_se().
v6 => v7:
 - Fix function name in the commit message
v5 => v6:
 - Commit message typofix
v4 => v5:
 - Drop the diff-channel stuff from the commit message
v3 => v4:
 - Adapt to 'drop diff-channel support' changes to ADC-helpers
 - select ADC helpers in the Kconfig
v2 => v3:
 - New patch

I picked the sun20i-gpadc in this series because it has a straightforward
approach for populating the struct iio_chan_spec. Everything else except
the .channel can use 'template'-data.

This makes the sun20i-gpadc well suited to be an example user of this new
helper. I hope this patch helps to evaluate whether these helpers are worth
the hassle.

The change is compile tested only!! Testing before applying is highly
appreciated (as always!). Also, even though I tried to audit the dts
files for the reg-properties in the channel nodes, use of references
didn't make it easy. I can't guarantee I didn't miss anything.
---
 drivers/iio/adc/Kconfig            |  1 +
 drivers/iio/adc/sun20i-gpadc-iio.c | 39 +++++++++++-------------------
 2 files changed, 15 insertions(+), 25 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index e4933de0c366..0993008a1586 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1357,6 +1357,7 @@ config SUN4I_GPADC
 config SUN20I_GPADC
 	tristate "Allwinner D1/T113s/T507/R329 and similar GPADCs driver"
 	depends on ARCH_SUNXI || COMPILE_TEST
+	select IIO_ADC_HELPER
 	help
 	  Say yes here to build support for Allwinner (D1, T113, T507 and R329)
 	  SoCs GPADC. This ADC provides up to 16 channels.
diff --git a/drivers/iio/adc/sun20i-gpadc-iio.c b/drivers/iio/adc/sun20i-gpadc-iio.c
index 136b8d9c294f..2428ea69d676 100644
--- a/drivers/iio/adc/sun20i-gpadc-iio.c
+++ b/drivers/iio/adc/sun20i-gpadc-iio.c
@@ -15,6 +15,7 @@
 #include <linux/property.h>
 #include <linux/reset.h>
 
+#include <linux/iio/adc-helpers.h>
 #include <linux/iio/iio.h>
 
 #define SUN20I_GPADC_DRIVER_NAME	"sun20i-gpadc"
@@ -149,36 +150,23 @@ static void sun20i_gpadc_reset_assert(void *data)
 	reset_control_assert(rst);
 }
 
+static const struct iio_chan_spec sun20i_gpadc_chan_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+};
+
 static int sun20i_gpadc_alloc_channels(struct iio_dev *indio_dev,
 				       struct device *dev)
 {
-	unsigned int channel;
-	int num_channels, i, ret;
+	int num_channels;
 	struct iio_chan_spec *channels;
 
-	num_channels = device_get_child_node_count(dev);
-	if (num_channels == 0)
-		return dev_err_probe(dev, -ENODEV, "no channel children\n");
-
-	channels = devm_kcalloc(dev, num_channels, sizeof(*channels),
-				GFP_KERNEL);
-	if (!channels)
-		return -ENOMEM;
-
-	i = 0;
-	device_for_each_child_node_scoped(dev, node) {
-		ret = fwnode_property_read_u32(node, "reg", &channel);
-		if (ret)
-			return dev_err_probe(dev, ret, "invalid channel number\n");
-
-		channels[i].type = IIO_VOLTAGE;
-		channels[i].indexed = 1;
-		channels[i].channel = channel;
-		channels[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
-		channels[i].info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
-
-		i++;
-	}
+	num_channels = devm_iio_adc_device_alloc_chaninfo_se(dev,
+				&sun20i_gpadc_chan_template, -1, &channels);
+	if (num_channels < 0)
+		return num_channels;
 
 	indio_dev->channels = channels;
 	indio_dev->num_channels = num_channels;
@@ -271,3 +259,4 @@ module_platform_driver(sun20i_gpadc_driver);
 MODULE_DESCRIPTION("ADC driver for sunxi platforms");
 MODULE_AUTHOR("Maksim Kiselev <bigunclemax@gmail.com>");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_DRIVER");
-- 
2.48.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v8 07/10] MAINTAINERS: Add IIO ADC helpers

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 804 bytes --]

Add undersigned as a maintainer for the IIO ADC helpers.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Revision history:
v2 =>
 - No changes
RFC v1 => v2:
 - New patch
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8e0736dc2ee0..5b96fb864227 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11208,6 +11208,13 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/rc/iguanair.c
 
+IIO ADC HELPERS
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/adc/industrialio-adc.c
+F:	include/linux/iio/adc-helpers.h
+
 IIO BACKEND FRAMEWORK
 M:	Nuno Sa <nuno.sa@analog.com>
 R:	Olivier Moysan <olivier.moysan@foss.st.com>
-- 
2.48.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v8 03/10] iio: adc: add helpers for parsing ADC nodes

[Andy Shevchenko]

On Mon, Mar 17, 2025 at 05:50:49PM +0200, Matti Vaittinen wrote:
> There are ADC ICs which may have some of the AIN pins usable for other
> functions. These ICs may have some of the AIN pins wired so that they
> should not be used for ADC.
> 
> (Preferred?) way for marking pins which can be used as ADC inputs is to
> add corresponding channels@N nodes in the device tree as described in
> the ADC binding yaml.
> 
> Add couple of helper functions which can be used to retrieve the channel
> information from the device node.

LGTM now, thanks!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v8 05/10] iio: adc: sun20i-gpadc: Use adc-helpers

[Andy Shevchenko]

On Mon, Mar 17, 2025 at 05:51:14PM +0200, Matti Vaittinen wrote:
> The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
> help drivers avoid open-coding the for_each_node -loop for getting the
> channel IDs. The helper provides standard way to detect the ADC channel
> nodes (by the node name), and a standard way to convert the "reg"
> -properties to channel identification numbers, used in the struct
> iio_chan_spec. Furthermore, the helper can optionally check the found
> channel IDs are smaller than given maximum. This is useful for callers
> which later use the IDs for example for indexing a channel data array.
> 
> The original driver treated all found child nodes as channel nodes. The
> new helper requires channel nodes to be named channel[@N]. This should
> help avoid problems with devices which may contain also other but ADC
> child nodes. Quick grep from arch/* with the sun20i-gpadc's compatible
> string didn't reveal any in-tree .dts with channel nodes named
> otherwise. Also, same grep shows all the in-tree .dts seem to have
> channel IDs between 0..num of channels.
> 
> Use the new helper.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko