[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.16.0-6-arm64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.2.0-19) 11.2.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP Debian 5.16.18-1 (2022-03-29)
[    0.000000] Machine model: Olimex A64 Teres-I
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbdbe1a40-0xbdbe3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges
[    0.000000] cma: Reserved 64 MiB at 0x00000000b7800000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 30 pages/cpu s82264 r8192 d32424 u122880
[    0.000000] pcpu-alloc: s82264 r8192 d32424 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 508032
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: rootwait root=UUID=2f4b7ce4-b9c5-4544-a938-9f189be41719 debug=on console=tty0 console=ttyS0,115200n8 no_console_suspend
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 100852K/2064384K available (12416K kernel code, 2542K rwdata, 8552K rodata, 5632K init, 624K bss, 103672K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x5ac with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 40879 entries in 160 pages
[    0.000000] ftrace: allocated 160 pages with 2 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000413] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.001041] Console: colour dummy device 80x25
[    0.001509] printk: console [tty0] enabled
[    0.001626] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001657] pid_max: default: 32768 minimum: 301
[    0.001809] LSM: Security Framework initializing
[    0.001854] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002009] AppArmor: AppArmor initialized
[    0.002030] TOMOYO Linux initialized
[    0.002127] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.002168] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.004878] rcu: Hierarchical SRCU implementation.
[    0.007462] EFI services will not be available.
[    0.008156] smp: Bringing up secondary CPUs ...
[    0.009769] Detected VIPT I-cache on CPU1
[    0.009842] arch_timer: CPU1: Trapping CNTVCT access
[    0.009868] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.011220] Detected VIPT I-cache on CPU2
[    0.011263] arch_timer: CPU2: Trapping CNTVCT access
[    0.011282] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.012603] Detected VIPT I-cache on CPU3
[    0.012642] arch_timer: CPU3: Trapping CNTVCT access
[    0.012656] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.012765] smp: Brought up 1 node, 4 CPUs
[    0.012863] SMP: Total of 4 processors activated.
[    0.012878] CPU features: detected: 32-bit EL0 Support
[    0.012889] CPU features: detected: 32-bit EL1 Support
[    0.012905] CPU features: detected: CRC32 instructions
[    0.023868] CPU: All CPU(s) started at EL2
[    0.024029] alternatives: patching kernel code
[    0.107931] node 0 deferred pages initialised in 80ms
[    0.109556] devtmpfs: initialized
[    0.119678] Registered cp15_barrier emulation handler
[    0.119735] Registered setend emulation handler
[    0.119755] KASLR disabled due to lack of seed
[    0.120012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.120082] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.123357] pinctrl core: initialized pinctrl subsystem
[    0.124455] DMI not present or invalid.
[    0.125167] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.129073] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.129423] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.129875] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.130017] audit: initializing netlink subsys (disabled)
[    0.130304] audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
[    0.131931] thermal_sys: Registered thermal governor 'fair_share'
[    0.131941] thermal_sys: Registered thermal governor 'bang_bang'
[    0.131958] thermal_sys: Registered thermal governor 'step_wise'
[    0.131972] thermal_sys: Registered thermal governor 'user_space'
[    0.131986] thermal_sys: Registered thermal governor 'power_allocator'
[    0.132509] cpuidle: using governor ladder
[    0.132558] cpuidle: using governor menu
[    0.132744] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.132904] ASID allocator initialised with 65536 entries
[    0.133413] Serial: AMBA PL011 UART driver
[    0.160789] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.160840] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.160857] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.160873] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.162881] ACPI: Interpreter disabled.
[    0.163379] iommu: Default domain type: Translated 
[    0.163398] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.163753] vgaarb: loaded
[    0.164163] EDAC MC: Ver: 3.0.0
[    0.165982] NetLabel: Initializing
[    0.166006] NetLabel:  domain hash size = 128
[    0.166019] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.166131] NetLabel:  unlabeled traffic allowed by default
[    0.166678] clocksource: Switched to clocksource arch_sys_counter
[    0.220686] VFS: Disk quotas dquot_6.6.0
[    0.220819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.221787] AppArmor: AppArmor Filesystem Enabled
[    0.222828] pnp: PnP ACPI: disabled
[    0.233065] NET: Registered PF_INET protocol family
[    0.233397] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.235043] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.235190] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.235551] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.235896] TCP: Hash tables configured (established 16384 bind 16384)
[    0.236247] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.236399] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.236489] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.236745] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.236788] NET: Registered PF_XDP protocol family
[    0.236812] PCI: CLS 0 bytes, default 64
[    0.237633] Trying to unpack rootfs image as initramfs...
[    0.252461] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.253001] kvm [1]: IPA Size Limit: 40 bits
[    0.256071] kvm [1]: vgic interrupt IRQ9
[    0.257099] kvm [1]: Hyp mode initialized successfully
[    0.259477] Initialise system trusted keyrings
[    0.259575] Key type blacklist registered
[    0.259943] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[    0.268277] zbud: loaded
[    0.269373] integrity: Platform Keyring initialized
[    0.269414] Key type asymmetric registered
[    0.269431] Asymmetric key parser 'x509' registered
[    0.269618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.269999] io scheduler mq-deadline registered
[    0.278947] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.280853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.293144] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.295964] Serial: AMBA driver
[    0.296491] msm_serial: driver initialized
[    0.300855] mousedev: PS/2 mouse device common for all mice
[    0.302551] sun6i-rtc 1f00000.rtc: registered as rtc0
[    0.302622] sun6i-rtc 1f00000.rtc: setting system clock to 2022-04-26T12:58:28 UTC (1650977908)
[    0.302652] sun6i-rtc 1f00000.rtc: RTC enabled
[    0.304124] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    0.305139] ledtrig-cpu: registered to indicate activity on CPUs
[    0.308855] NET: Registered PF_INET6 protocol family
[    2.488044] Freeing initrd memory: 33080K
[    2.536746] Segment Routing with IPv6
[    2.536869] In-situ OAM (IOAM) with IPv6
[    2.536979] mip6: Mobile IPv6
[    2.536997] NET: Registered PF_PACKET protocol family
[    2.537184] mpls_gso: MPLS GSO support
[    2.538223] registered taskstats version 1
[    2.538254] Loading compiled-in X.509 certificates
[    2.920413] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.920533] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    2.922469] zswap: loaded using pool lzo/zbud
[    2.923395] Key type ._fscrypt registered
[    2.923421] Key type .fscrypt registered
[    2.923434] Key type fscrypt-provisioning registered
[    2.946160] Key type encrypted registered
[    2.946221] AppArmor: AppArmor sha1 policy hashing enabled
[    2.946291] ima: No TPM chip found, activating TPM-bypass!
[    2.946340] ima: Allocated hash algorithm: sha256
[    2.946411] ima: No architecture policies found
[    2.946480] evm: Initialising EVM extended attributes:
[    2.946494] evm: security.selinux
[    2.946506] evm: security.SMACK64 (disabled)
[    2.946518] evm: security.SMACK64EXEC (disabled)
[    2.946529] evm: security.SMACK64TRANSMUTE (disabled)
[    2.946541] evm: security.SMACK64MMAP (disabled)
[    2.946553] evm: security.apparmor
[    2.946564] evm: security.ima
[    2.946574] evm: security.capability
[    2.946585] evm: HMAC attrs: 0x1
[    3.603910] platform 1100000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller
[    3.604034] platform 1100000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    3.604985] platform 1200000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller
[    3.605086] platform 1200000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    3.606497] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[    3.611885] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    3.612763] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[    3.613513] printk: console [ttyS0] disabled
[    3.633718] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 38, base_baud = 1500000) is a U6_16550A
[    4.779942] printk: console [ttyS0] enabled
[    4.801021] Freeing unused kernel memory: 5632K
[    4.855743] Checked W+X mappings: passed, no W+X pages found
[    4.861491] Run /init as init process
[    4.865181]   with arguments:
[    4.868162]     /init
[    4.870438]   with environment:
[    4.873589]     HOME=/
[    4.875959]     TERM=linux
[    5.566743] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.568987] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    5.585209] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    5.585509] i2c 0-0038: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    5.600723] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    5.607012] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    5.608076] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    5.614198] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    5.615271] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    5.622340] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    5.630998] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    5.632942] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.637989] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    5.643260] usbcore: registered new interface driver usbfs
[    5.643328] usbcore: registered new interface driver hub
[    5.643409] usbcore: registered new device driver usb
[    5.645539] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    5.652938] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.661587] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    5.676797] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.677326] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    5.677336] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    5.677346] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    5.677356] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    5.677366] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.681859] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    5.682042] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    5.682052] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    5.682061] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    5.682070] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    5.682081] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    5.690617] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    5.691203] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.699491] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    5.699512] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    5.699524] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    5.699536] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.706776] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    5.717270] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.717473] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    5.717483] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    5.717492] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    5.717502] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    5.717512] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.722634] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    5.722646] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    5.722658] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    5.948996] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[    5.956468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.967644] ehci-platform: EHCI generic platform driver
[    5.973647] ehci-platform 1c1b000.usb: EHCI Host Controller
[    5.979349] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
[    5.987362] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000
[    5.997722] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    5.998040] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    6.006755] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.013751] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    6.020957] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.027973] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    6.035032] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.042469] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    6.049969] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.060877] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.061028] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    6.067899] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.071944] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.079578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    6.087282] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    6.091604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.103775] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.107150] usb usb1: Product: EHCI Host Controller
[    6.108840] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.108863] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.108900] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.108911] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.108922] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.123948] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.128673] usb usb1: Manufacturer: Linux 5.16.0-6-arm64 ehci_hcd
[    6.129827] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    6.129841] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    6.129850] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    6.129860] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    6.129871] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.141735] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    6.143807] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.143829] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.143838] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.143848] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.143858] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.147948] usb usb1: SerialNumber: 1c1b000.usb
[    6.152964] hub 1-0:1.0: USB hub found
[    6.155556] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    6.161213] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.161235] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.161245] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.161254] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.161265] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.162345] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.171731] hub 1-0:1.0: 1 port detected
[    6.173803] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    6.190966] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.195876] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    6.202876] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.203767] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.210304] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.221187] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.232772] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.233065] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    6.233075] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    6.233085] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    6.233094] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    6.233104] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.235665] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.235681] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.450690] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.466330] ohci-platform: OHCI generic platform driver
[    6.478830] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    6.484995] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    6.485826] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 2
[    6.492845] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    6.496792] axp20x-gpio axp20x-gpio: DMA mask not set
[    6.499646] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.500822] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400
[    6.501339] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.501352] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.501361] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.501371] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.501381] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.507669] sun50i-a64-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    6.521788] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[    6.527381] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    6.539699] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.540091] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.540101] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.540110] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.540120] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.540130] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.541701] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.578937] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[    6.584437] vcc-ddr3: Bringing 1360000uV into 1500000-1500000uV
[    6.589219] sun50i-a64-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.589298] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.589308] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.589318] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.589328] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.589338] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.592669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.595312] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    6.603325] vcc-pe: Bringing 3300000uV into 2800000-2800000uV
[    6.608567] usb usb2: Product: Generic Platform OHCI controller
[    6.616406] vcc-pl: Bringing 1800000uV into 3300000-3300000uV
[    6.618734] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    6.621341] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.621364] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.621374] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.621384] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.621394] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.622993] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[    6.623125] usb usb2: Manufacturer: Linux 5.16.0-6-arm64 ohci_hcd
[    6.623134] usb usb2: SerialNumber: 1c1b400.usb
[    6.624528] hub 2-0:1.0: USB hub found
[    6.628194] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    6.628216] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    6.628227] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    6.628237] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    6.628247] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.638252] vcc-dvdd-csi: Bringing 700000uV into 1800000-1800000uV
[    6.641498] hub 2-0:1.0: 1 port detected
[    6.662207] mmc0: new high speed SDHC card at address 59b4
[    6.665732] random: fast init done
[    6.673964] mmcblk0: mmc0:59b4 USD   14.9 GiB 
[    6.680317] [drm] Found ANX6345 (ver. 170) eDP Transmitter
[    6.680512] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    6.680529] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.680538] usb 1-1: Product: USB2.0 Hub
[    6.681632] hub 1-1:1.0: USB hub found
[    6.682014] hub 1-1:1.0: 4 ports detected
[    6.694571]  mmcblk0: p1
[    6.706175] simple-framebuffer be000000.framebuffer: framebuffer at 0xbe000000, 0x400800 bytes
[    6.730713] mmc1: new DDR MMC card at address 0001
[    6.735740] simple-framebuffer be000000.framebuffer: format=x8r8g8b8, mode=1366x768x32, linelength=5464
[    6.961883] mmcblk1: mmc1:0001 R1J56L 13.8 GiB 
[    6.967414]  mmcblk1: p1 p2
[    6.971014] mmcblk1boot0: mmc1:0001 R1J56L 16.0 MiB 
[    6.977358] mmcblk1boot1: mmc1:0001 R1J56L 16.0 MiB 
[    6.978547] Console: switching to colour frame buffer device 170x48
[    7.024761] simple-framebuffer be000000.framebuffer: fb0: simplefb registered!
[    7.068892] usb 1-1.3: new high-speed USB device number 3 using ehci-platform
[    7.071973] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[    7.095158] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    7.097207] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[    7.122990] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[    7.133853] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    7.138179] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[    7.169392] checking generic (be000000 400800) vs hw (0 ffffffffffffffff)
[    7.170650] mmc2: new high speed SDIO card at address 0001
[    7.181139] fb0: switching to sun4i-drm from simple
[    7.203061] Console: switching to colour dummy device 80x25
[    7.215666] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    7.236154] usb 1-1.3: New USB device found, idVendor=1908, idProduct=2311, bcdDevice= 1.00
[    7.246984] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.259650] usb 1-1.3: Product: USB2.0 PC CAMERA
[    7.269784] usb 1-1.3: Manufacturer: Generic
[    7.362789] usb 1-1.4: new full-speed USB device number 4 using ehci-platform
[    7.452541] Console: switching to colour frame buffer device 170x48
[    7.492523] usb 1-1.4: New USB device found, idVendor=15ba, idProduct=003b, bcdDevice= 0.01
[    7.498396] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
[    7.512369] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.563746] hid: raw HID events driver (C) Jiri Kosina
[    7.584535] usbcore: registered new interface driver usbhid
[    7.593431] usbhid: USB HID core driver
[    7.593580] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
[    7.617502] hid-generic 0003:15BA:003B.0001: hiddev0,hidraw0: USB HID v1.11 Device [HID 15ba:003b] on usb-1c1b000.usb-1.4/input0
[    7.626266] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null). Quota mode: none.
[    7.974515] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.759303] systemd[1]: Inserted module 'autofs4'
[    8.811641] usb 1-1.4: USB disconnect, device number 4
[    8.905225] systemd[1]: systemd 250.3-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    8.938363] systemd[1]: Detected architecture arm64.
[    8.963860] systemd[1]: Hostname set to <teres>.
[    9.116628] systemd-fstab-generator[205]: Checking was requested for "tmpfs", but it is not a device.
[    9.554718] usb 1-1.4: new full-speed USB device number 5 using ehci-platform
[    9.681148] usb 1-1.4: New USB device found, idVendor=15ba, idProduct=003c, bcdDevice= 0.01
[    9.689844] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[    9.697544] usb 1-1.4: Product: TERES Keyboard+Touchpad
[    9.702927] usb 1-1.4: Manufacturer: Olimex Ltd.
[    9.714292] usb 1-1.4: SerialNumber: A4138353330351E07180
[    9.737971] input: Olimex Ltd. TERES Keyboard+Touchpad as /devices/platform/soc/1c1b000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:15BA:003C.0002/input/input1
[    9.819561] hid-generic 0003:15BA:003C.0002: input,hidraw0: USB HID v1.11 Keyboard [Olimex Ltd. TERES Keyboard+Touchpad] on usb-1c1b000.usb-1.4/input0
[    9.843970] input: Olimex Ltd. TERES Keyboard+Touchpad as /devices/platform/soc/1c1b000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:15BA:003C.0003/input/input2
[    9.865420] hid-generic 0003:15BA:003C.0003: input,hidraw1: USB HID v1.11 Mouse [Olimex Ltd. TERES Keyboard+Touchpad] on usb-1c1b000.usb-1.4/input1
[    9.986803] systemd[1]: Queued start job for default target Graphical Interface.
[   10.003849] random: systemd: uninitialized urandom read (16 bytes read)
[   10.022890] systemd[1]: Created slice Slice /system/getty.
[   10.050946] random: systemd: uninitialized urandom read (16 bytes read)
[   10.068199] systemd[1]: Created slice Slice /system/modprobe.
[   10.098940] random: systemd: uninitialized urandom read (16 bytes read)
[   10.116616] systemd[1]: Created slice Slice /system/serial-getty.
[   10.148747] systemd[1]: Created slice User and Session Slice.
[   10.179450] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.211339] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.244145] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.279151] systemd[1]: Reached target Local Encrypted Volumes.
[   10.311027] systemd[1]: Reached target Local Integrity Protected Volumes.
[   10.343069] systemd[1]: Reached target Path Units.
[   10.366968] systemd[1]: Reached target Remote File Systems.
[   10.394921] systemd[1]: Reached target Slice Units.
[   10.418999] systemd[1]: Reached target Swaps.
[   10.443029] systemd[1]: Reached target Local Verity Protected Volumes.
[   10.477094] systemd[1]: Listening on Syslog Socket.
[   10.499823] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.531396] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.564200] systemd[1]: Listening on Journal Audit Socket.
[   10.595753] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.627876] systemd[1]: Listening on Journal Socket.
[   10.652138] systemd[1]: Listening on udev Control Socket.
[   10.683656] systemd[1]: Listening on udev Kernel Socket.
[   10.716679] systemd[1]: Mounting Huge Pages File System...
[   10.744650] systemd[1]: Mounting POSIX Message Queue File System...
[   10.780967] systemd[1]: Mounting Kernel Debug File System...
[   10.808535] systemd[1]: Mounting Kernel Trace File System...
[   10.838273] systemd[1]: Starting Wait for network to be configured by ifupdown...
[   10.877507] systemd[1]: Starting Set the console keyboard layout...
[   10.914103] systemd[1]: Starting Create List of Static Device Nodes...
[   10.953674] systemd[1]: Starting Load Kernel Module configfs...
[   10.985670] systemd[1]: Starting Load Kernel Module drm...
[   11.017825] systemd[1]: Starting Load Kernel Module fuse...
[   11.043678] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   11.074163] systemd[1]: Starting Journal Service...
[   11.089859] fuse: init (API version 7.35)
[   11.109429] systemd[1]: Starting Load Kernel Modules...
[   11.138578] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.171504] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[   11.195042] systemd[1]: Starting Coldplug All udev Devices...
[   11.241955] systemd[1]: Mounted Huge Pages File System.
[   11.271920] systemd[1]: Mounted POSIX Message Queue File System.
[   11.279669] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   11.324117] systemd[1]: Mounted Kernel Debug File System.
[   11.352004] systemd[1]: Mounted Kernel Trace File System.
[   11.381213] systemd[1]: Finished Wait for network to be configured by ifupdown.
[   11.414003] systemd[1]: Finished Set the console keyboard layout.
[   11.445898] systemd[1]: Finished Create List of Static Device Nodes.
[   11.481368] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   11.496401] systemd[1]: Finished Load Kernel Module configfs.
[   11.529767] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   11.543704] systemd[1]: Finished Load Kernel Module drm.
[   11.566533] usbcore: registered new interface driver asix
[   11.577539] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   11.591668] systemd[1]: Finished Load Kernel Module fuse.
[   11.624307] systemd[1]: Started Journal Service.
[   11.783989] systemd-journald[238]: Received client request to flush runtime journal.
[   13.870725] random: crng init done
[   13.879265] random: 7 urandom warning(s) missed due to ratelimiting
[   26.349994] audit: type=1400 audit(1650977934.544:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=268 comm="apparmor_parser"
[   26.371157] audit: type=1400 audit(1650977934.548:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=269 comm="apparmor_parser"
[   26.398301] audit: type=1400 audit(1650977934.548:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=269 comm="apparmor_parser"
[   26.427912] audit: type=1400 audit(1650977934.612:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=271 comm="apparmor_parser"
[   26.456970] audit: type=1400 audit(1650977934.616:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=271 comm="apparmor_parser"
[   26.479978] audit: type=1400 audit(1650977934.616:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=271 comm="apparmor_parser"
[   26.740563] audit: type=1400 audit(1650977934.936:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/surf" pid=287 comm="apparmor_parser"
[   26.771532] audit: type=1400 audit(1650977934.936:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=289 comm="apparmor_parser"
[   26.804681] audit: type=1400 audit(1650977934.936:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=289 comm="apparmor_parser"
[   26.837539] audit: type=1400 audit(1650977934.936:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=289 comm="apparmor_parser"
[   27.382828] mc: Linux media interface: v0.10
[   27.464397] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
[   27.490937] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[   27.505613] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[   27.520524] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[   27.535364] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[   27.554185] sun8i-ce 1c15000.crypto: Register cbc(aes)
[   27.566032] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
[   27.583851] sun8i-ce 1c15000.crypto: Register ecb(aes)
[   27.606904] videodev: Linux video capture interface: v2.00
[   27.629399] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[   27.833915] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb-aes-ce
[   27.854630] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
[   27.973657] simple-amplifier audio-amplifier: supply VCC not found, using dummy regulator
[   28.001032] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input3
[   28.032375] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   28.057557] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   28.075612] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   28.096893] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   28.116943] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[   28.122953] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
[   28.130039] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[   28.158354] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[   28.171892] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[   28.196668] axp20x-adc axp813-adc: DMA mask not set
[   28.196904] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[   28.207433] lima 1c40000.gpu: bus rate = 200000000
[   28.207458] lima 1c40000.gpu: mod rate = 297000000
[   28.207593] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[   28.213314] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set
[   28.223577] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   28.231488] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[   28.255579] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
[   28.331266] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[   28.345430] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   28.380415] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
[   28.386068] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[   28.412109] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
[   28.438645] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1
[   28.451248] pnetdev = 000000002a3266ca
[   28.510569] usb 1-1.3: Found UVC 1.00 device USB2.0 PC CAMERA (1908:2311)
[   28.573345] input: USB2.0 PC CAMERA: USB2.0 PC CAM as /devices/platform/soc/1c1b000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[   28.646619] usbcore: registered new interface driver uvcvideo
[   28.663444] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:5
[   35.806870] dc1sw: disabling
[   35.821710] vcc-hdmi: disabling
[   35.829978] cpvdd: disabling
[   37.465066] usb 1-1.1: new high-speed USB device number 6 using ehci-platform
[   37.618820] usb 1-1.1: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01
[   37.632299] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   37.644600] usb 1-1.1: Product: AX88772B
[   37.653614] usb 1-1.1: Manufacturer: ASIX Elec. Corp.
[   37.669089] usb 1-1.1: SerialNumber: 000001
[   37.731492] NET: Registered PF_APPLETALK protocol family
[   37.926258] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:14
[   37.941800] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   37.958112] rtl8723bs mmc2:0001:1: firmware: direct-loading firmware rtlwifi/rtl8723bs_nic.bin
[   38.324147] Asix Electronics AX88772C usb-001:006:10: attached PHY driver (mii_bus:phy_addr=usb-001:006:10, irq=POLL)
[   39.311281] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:1
[   39.323473] asix 1-1.1:1.0 eth0: register 'asix' at usb-1c1b000.usb-1.1, ASIX AX88772B USB 2.0 Ethernet, 00:80:8a:8e:30:51
[   39.478493] asix 1-1.1:1.0 enx00808a8e3051: renamed from eth0
[   43.167268] asix 1-1.1:1.0 enx00808a8e3051: Link is Down
[   45.226822] asix 1-1.1:1.0 enx00808a8e3051: Link is Up - 100Mbps/Full - flow control off
[   45.629090] IPv6: ADDRCONF(NETDEV_CHANGE): enx00808a8e3051: link becomes ready
[   48.610590] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:10
[   48.623093] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:2
[   48.658540] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:14
[   48.666285] rtl8723bs mmc2:0001:1 wlan0: rtw_ndev_notifier_call(wlan0) state:1
[   49.152649] asix 1-1.1:1.0 enx00808a8e3051: Link is Down
[   49.229274] asix 1-1.1:1.0 enx00808a8e3051: Link is Down
[   49.743391] asix 1-1.1:1.0 enx00808a8e3051: Link is Down
[   51.780127] IPv6: ADDRCONF(NETDEV_CHANGE): enx00808a8e3051: link becomes ready
[   51.788138] asix 1-1.1:1.0 enx00808a8e3051: Link is Up - 100Mbps/Full - flow control off
[   56.650711] usb 1-1.2: new low-speed USB device number 7 using ehci-platform
[   56.771154] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[   56.779860] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   56.787446] usb 1-1.2: Product: USB Optical Mouse
[   56.792435] usb 1-1.2: Manufacturer: Logitech
[   56.807202] input: Logitech USB Optical Mouse as /devices/platform/soc/1c1b000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0004/input/input5
[   56.829783] hid-generic 0003:046D:C077.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-1c1b000.usb-1.2/input0
[   59.161526] systemd-journald[238]: Time jumped backwards, rotating.