ARM Sunxi Platform Development
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Samuel Holland <samuel@sholland.org>,
	Jun Yan <jerrysteve1101@gmail.com>
Cc: Jun Yan <jerrysteve1101@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet
Date: Tue, 17 Nov 2026 17:37:55 +0100	[thread overview]
Message-ID: <n0Gb_HzYRTi_JMXR8vuZwg@gmail.com> (raw)
In-Reply-To: <20261117142122.246986-1-jerrysteve1101@gmail.com>

Dne torek, 17. november 2026 ob 15:21:21 Srednjeevropski standardni čas je Jun Yan napisal(a):
> The TaiqiCat A01 has a 100 Mbit/s Ethernet port, which uses the EPHY
> integrated into the co-packaged AC200 of the Allwinner H6 SoC.
> 
> The AC200 derives its 24 MHz reference clock from PWM1, so enable the
> PWM controller and the pwm-clock node that supplies it. Also enable
> I2C3, over which the AC200 is accessed, and describe the AC200 EPHY
> package on the EMAC MDIO bus, with the EMAC operating in RMII mode.
> 
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> 
> ---
> The AC200 MFD and EPHY drivers/bindings and the sun50i-h6.dtsi AC200
> description this depends on are already merged in sunxi/dt-for-7.5.
> ---
>  .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> index 225f42bd3b9e..9b192caeecb2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> @@ -14,6 +14,7 @@ / {
>  	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
>  
>  	aliases {
> +		ethernet0 = &emac;
>  		ethernet1 = &sdio_wifi;
>  		serial0 = &uart0;
>  	};
> @@ -87,6 +88,10 @@ wifi_pwrseq: wifi-pwrseq {
>  	};
>  };
>  
> +&ac200_clk {
> +	status = "okay";
> +};
> +
>  &cpu0 {
>  	cpu-supply = <&reg_dcdca>;
>  };
> @@ -107,6 +112,14 @@ &ehci3 {
>  	status = "okay";
>  };
>  
> +&emac {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rmii_pins>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ac200_ephy>;
> +	status = "okay";
> +};
> +
>  &gpu {
>  	mali-supply = <&reg_dcdcc>;
>  	status = "okay";
> @@ -123,6 +136,29 @@ hdmi_out_con: endpoint {
>  	};
>  };
>  
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +&mdio {
> +	ethernet-phy-package@1 {
> +		compatible = "x-powers,ac200-ephy-package";
> +		reg = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		vcc-supply = <&reg_aldo2>;
> +		nvmem-cells = <&ephy_calibration>;
> +		nvmem-cell-names = "configuration";
> +		x-powers,ac200 = <&ac200>;
> +		x-powers,xmii-rx-clock-inverted;
> +
> +		ac200_ephy: ethernet-phy@1 {
> +			compatible = "ethernet-phy-id0044.1400";
> +			reg = <1>;
> +		};
> +	};
> +};
> +
>  &mmc0 {
>  	vmmc-supply = <&reg_cldo1>;
>  	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> @@ -173,6 +209,10 @@ &pio {
>  	vcc-pg-supply = <&reg_bldo3>;
>  };
>  
> +&pwm {
> +	status = "okay";
> +};
> +
>  &r_i2c {
>  	status = "okay";
>  
> 





      parent reply	other threads:[~2026-11-17 16:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 14:21 [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet Jun Yan
2026-11-17 14:38 ` sashiko-bot
2026-11-17 16:37 ` Jernej Škrabec [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=n0Gb_HzYRTi_JMXR8vuZwg@gmail.com \
    --to=jernej.skrabec@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jerrysteve1101@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox