From: sashiko-bot@kernel.org
To: "Yang Siyuan" <hsyysy@163.com>
Cc: linux-watchdog@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH] watchdog: sunxi_wdt: stop the watchdog across system suspend
Date: Tue, 17 Nov 2026 09:36:16 +0000 [thread overview]
Message-ID: <sashiko-outbox-218496@kernel.org> (raw)
In-Reply-To: <20261117092036.12192-1-hsyysy@163.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] watchdog: sunxi_wdt: unused function warnings when
CONFIG_PM_SLEEP=n
- [Low] watchdog: sunxi_wdt: redundant running_at_suspend state in
sunxi_wdt_suspend()
--
commit 5093f8c201de1c0caf9e3ec2bb9831935e62dd95
Author: Yang Siyuan <hsyysy@163.com>
watchdog: sunxi_wdt: stop the watchdog across system suspend
This commit adds system sleep PM callbacks to stop the Allwinner watchdog
before suspend and restart it on resume if it was running.
> diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
> index a6500ebf24bad..23b50cb8d3ebc 100644
> --- a/drivers/watchdog/sunxi_wdt.c
> +++ b/drivers/watchdog/sunxi_wdt.c
> @@ -55,6 +55,7 @@ struct sunxi_wdt_dev {
> struct watchdog_device wdt_dev;
> void __iomem *wdt_base;
> const struct sunxi_wdt_reg *wdt_regs;
> + bool running_at_suspend;
> };
>
> /*
> @@ -225,6 +226,36 @@ static int sunxi_wdt_start(struct watchdog_device *wdt_dev)
> return 0;
> }
>
> +/*
> + * The hardware watchdog has a maximum timeout of 16 seconds. A system
> + * suspend easily lasts longer than that, and the watchdog core only cancels
> + * its ping worker during suspend; it does not stop the timer. Stop the
> + * watchdog explicitly while suspended and re-arm it on resume.
> + */
> +static int sunxi_wdt_suspend(struct device *dev)
> +{
> + struct sunxi_wdt_dev *sunxi_wdt = dev_get_drvdata(dev);
> +
> + sunxi_wdt->running_at_suspend = sunxi_wdt_is_running(&sunxi_wdt->wdt_dev);
> + sunxi_wdt_stop(&sunxi_wdt->wdt_dev);
> +
> + return 0;
> +}
> +
> +static int sunxi_wdt_resume(struct device *dev)
> +{
> + struct sunxi_wdt_dev *sunxi_wdt = dev_get_drvdata(dev);
> +
> + if (sunxi_wdt->running_at_suspend)
> + sunxi_wdt_start(&sunxi_wdt->wdt_dev);
> +
> + return 0;
> +}
[Severity: Low]
Could sunxi_wdt_suspend() and sunxi_wdt_resume() check
watchdog_hw_running(&sunxi_wdt->wdt_dev) instead of tracking
running_at_suspend? Both sunxi_wdt_probe() and the watchdog core already
maintain WDOG_HW_RUNNING in wdt_dev.status, and guarding sunxi_wdt_stop()
with watchdog_hw_running() also avoids reading and writing wdt_mode on
suspend when the watchdog is inactive.
Also, this driver neither sets max_hw_heartbeat_ms nor calls
watchdog_stop_ping_on_suspend(), so the comment's reference to the
watchdog core cancelling its ping worker during suspend does not apply
here.
> +
> +static const struct dev_pm_ops sunxi_wdt_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sunxi_wdt_suspend, sunxi_wdt_resume)
> +};
> +
> static const struct watchdog_info sunxi_wdt_info = {
[ ... ]
> @@ -348,6 +381,7 @@ static struct platform_driver sunxi_wdt_driver = {
> .driver = {
> .name = DRV_NAME,
> .of_match_table = sunxi_wdt_dt_ids,
> + .pm = &sunxi_wdt_pm_ops,
> },
> };
[Severity: Medium]
Does building with CONFIG_PM_SLEEP=n warn about unused functions for
sunxi_wdt_suspend() and sunxi_wdt_resume()? SET_SYSTEM_SLEEP_PM_OPS()
expands to nothing when CONFIG_PM_SLEEP is disabled, leaving both static
functions unreferenced. Using DEFINE_SIMPLE_DEV_PM_OPS() with
pm_sleep_ptr(&sunxi_wdt_pm_ops) lets the compiler drop the callbacks and
PM ops structure without warnings.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261117092036.12192-1-hsyysy@163.com?part=1
next prev parent reply other threads:[~2026-11-17 9:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 9:20 [PATCH] watchdog: sunxi_wdt: stop the watchdog across system suspend Yang Siyuan
2026-11-17 9:36 ` sashiko-bot [this message]
2026-11-17 10:40 ` [PATCH v2] " Yang Siyuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-218496@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=hsyysy@163.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-watchdog@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox