* [PATCH v2 1/4] usb: otg: Add ulpi viewport access ops
[not found] ` <1297895962-28590-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
@ 2011-02-16 22:39 ` Benoit Goby
[not found] ` <1297895962-28590-2-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
2011-02-16 22:39 ` [PATCH v2 2/4] ARM: tegra: Add support for Tegra USB PHYs Benoit Goby
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Benoit Goby @ 2011-02-16 22:39 UTC (permalink / raw)
To: David Brownell, Greg Kroah-Hartman,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Robert Morell
Cc: Benoit Goby, Olof Johansson, Erik Gilling,
linux-tegra-u79uwXL29TY76Z2rM5mHXA
Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea/ARC based controllers).
Change-Id: I53d50857d4716f8df708af199ad1def1ff9d4beb
Signed-off-by: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
---
drivers/usb/otg/Kconfig | 7 +++
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/ulpi_viewport.c | 81 +++++++++++++++++++++++++++++++++++++++
include/linux/usb/ulpi.h | 5 ++
4 files changed, 94 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/otg/ulpi_viewport.c
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d..b1d62d9 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -49,6 +49,13 @@ config USB_ULPI
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
+config USB_ULPI_VIEWPORT
+ bool "ULPI Viewport Access Operations"
+ depends on USB_ULPI
+ help
+ Provides read/write operations to the ULPI phy register set for
+ controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index a520e71..44581a9 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o
obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
obj-$(CONFIG_USB_ULPI) += ulpi.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
obj-$(CONFIG_USB_MSM_OTG_72K) += msm72k_otg.o
obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/otg/ulpi_viewport.c
new file mode 100644
index 0000000..f0cb8fb
--- /dev/null
+++ b/drivers/usb/otg/ulpi_viewport.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEW_WAKEUP (1 << 31)
+#define ULPI_VIEW_RUN (1 << 30)
+#define ULPI_VIEW_WRITE (1 << 29)
+#define ULPI_VIEW_READ (0 << 29)
+#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16)
+#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff)
+#define ULPI_VIEW_DATA_WRITE(x) (((x) & 0xff) << 0)
+
+static int ulpi_viewport_wait(void __iomem *view, u32 mask, u32 res)
+{
+ unsigned long timeout = 2000;
+
+ while (timeout--) {
+ if ((readl(view) & mask) == res)
+ return 0;
+ cpu_relax();
+ };
+ return -ETIMEDOUT;
+}
+
+static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP, 0);
+ if (ret)
+ return ret;
+
+ writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN, 0);
+ if (ret)
+ return ret;
+
+ return ULPI_VIEW_DATA_READ(readl(view));
+}
+
+static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP, 0);
+ if (ret)
+ return ret;
+
+ writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) |
+ ULPI_VIEW_ADDR(reg), view);
+ return ulpi_viewport_wait(view, ULPI_VIEW_RUN, 0);
+}
+
+struct otg_io_access_ops ulpi_viewport_access_ops = {
+ .read = ulpi_viewport_read,
+ .write = ulpi_viewport_write,
+};
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 82b1507..9595796 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -184,4 +184,9 @@
struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
unsigned int flags);
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+/* access ops for controllers with a viewport register */
+extern struct otg_io_access_ops ulpi_viewport_access_ops;
+#endif
+
#endif /* __LINUX_USB_ULPI_H */
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/4] ARM: tegra: Add support for Tegra USB PHYs
[not found] ` <1297895962-28590-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
2011-02-16 22:39 ` [PATCH v2 1/4] usb: otg: Add ulpi viewport access ops Benoit Goby
@ 2011-02-16 22:39 ` Benoit Goby
2011-02-16 22:39 ` [PATCH v2 3/4] usb: host: Add EHCI driver for NVIDIA Tegra SoCs Benoit Goby
2011-02-16 22:39 ` [PATCH v2 4/4] USB: ehci: tegra: Align DMA transfers to 32 bytes Benoit Goby
3 siblings, 0 replies; 6+ messages in thread
From: Benoit Goby @ 2011-02-16 22:39 UTC (permalink / raw)
To: David Brownell, Greg Kroah-Hartman,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Robert Morell
Cc: Benoit Goby, Olof Johansson, Erik Gilling,
linux-tegra-u79uwXL29TY76Z2rM5mHXA
Interface used by Tegra's gadget driver and ehci driver
to power on and configure the USB PHYs.
Change-Id: I76b699d8cb74bf38034e95f3a2f1f322460e8f61
Signed-off-by: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/mach-tegra/Kconfig | 3 +
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/include/mach/usb_phy.h | 86 +++
arch/arm/mach-tegra/usb_phy.c | 795 ++++++++++++++++++++++++++++
4 files changed, 885 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-tegra/include/mach/usb_phy.h
create mode 100644 arch/arm/mach-tegra/usb_phy.c
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index acd9552..394b3c7 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC
select CPU_V7
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB_SUPPORT
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index cdbc68e..38b66a8 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
+obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
obj-${CONFIG_MACH_HARMONY} += board-harmony.o
obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
new file mode 100644
index 0000000..d4b8f9e
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/include/mach/usb_phy.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_USB_PHY_H
+#define __MACH_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+ u8 hssync_start_delay;
+ u8 elastic_limit;
+ u8 idle_wait_delay;
+ u8 term_range_adj;
+ u8 xcvr_setup;
+ u8 xcvr_lsfslew;
+ u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+ int reset_gpio;
+ const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+ TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+ TEGRA_USB_PHY_PORT_SPEED_LOW,
+ TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+ TEGRA_USB_PHY_MODE_DEVICE,
+ TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+ int instance;
+ const struct tegra_xtal_freq *freq;
+ void __iomem *regs;
+ void __iomem *pad_regs;
+ struct clk *clk;
+ struct clk *pll_u;
+ struct clk *pad_clk;
+ enum tegra_usb_phy_mode mode;
+ void *config;
+ struct otg_transceiver *ulpi;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+ void *config, enum tegra_usb_phy_mode phy_mode);
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy);
+
+#endif /* __MACH_USB_PHY_H */
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
new file mode 100644
index 0000000..88081bb
--- /dev/null
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -0,0 +1,795 @@
+/*
+ * arch/arm/mach-tegra/usb_phy.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Erik Gilling <konkers-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
+ * Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <asm/mach-types.h>
+#include <mach/usb_phy.h>
+#include <mach/iomap.h>
+
+#define ULPI_VIEWPORT 0x170
+
+#define USB_PORTSC1 0x184
+#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26)
+#define USB_PORTSC1_PHCD (1 << 23)
+#define USB_PORTSC1_WKOC (1 << 22)
+#define USB_PORTSC1_WKDS (1 << 21)
+#define USB_PORTSC1_WKCN (1 << 20)
+#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
+#define USB_PORTSC1_PP (1 << 12)
+#define USB_PORTSC1_SUSP (1 << 7)
+#define USB_PORTSC1_PE (1 << 2)
+#define USB_PORTSC1_CCS (1 << 0)
+
+#define USB_SUSP_CTRL 0x400
+#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
+#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
+#define USB_SUSP_CLR (1 << 5)
+#define USB_PHY_CLK_VALID (1 << 7)
+#define UTMIP_RESET (1 << 11)
+#define UHSIC_RESET (1 << 11)
+#define UTMIP_PHY_ENABLE (1 << 12)
+#define ULPI_PHY_ENABLE (1 << 13)
+#define USB_SUSP_SET (1 << 14)
+#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
+
+#define USB1_LEGACY_CTRL 0x410
+#define USB1_NO_LEGACY_MODE (1 << 0)
+#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
+#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+ (1 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
+#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
+
+#define ULPI_TIMING_CTRL_0 0x424
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+#define ULPI_TIMING_CTRL_1 0x428
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1 0x804
+#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0 0x808
+#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
+#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
+#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
+#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25)
+
+#define UTMIP_BIAS_CFG0 0x80c
+#define UTMIP_OTGPD (1 << 11)
+#define UTMIP_BIASPD (1 << 10)
+
+#define UTMIP_HSRX_CFG0 0x810
+#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
+#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1 0x814
+#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0 0x820
+#define UTMIP_FS_PREABMLE_J (1 << 19)
+#define UTMIP_HS_DISCON_DISABLE (1 << 8)
+
+#define UTMIP_MISC_CFG0 0x824
+#define UTMIP_DPDM_OBSERVE (1 << 26)
+#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
+
+#define UTMIP_MISC_CFG1 0x828
+#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
+#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0 0x82c
+#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0 0x830
+#define UTMIP_PD_CHRG (1 << 0)
+
+#define UTMIP_SPARE_CFG0 0x834
+#define FUSE_SETUP_SEL (1 << 3)
+
+#define UTMIP_XCVR_CFG1 0x838
+#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
+#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1 0x83c
+#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static int utmip_pad_count;
+
+struct tegra_xtal_freq {
+ int freq;
+ u8 enable_delay;
+ u8 stable_count;
+ u8 active_delay;
+ u8 xtal_freq_count;
+ u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+ {
+ .freq = 12000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x2F,
+ .active_delay = 0x04,
+ .xtal_freq_count = 0x76,
+ .debounce = 0x7530,
+ },
+ {
+ .freq = 13000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x33,
+ .active_delay = 0x05,
+ .xtal_freq_count = 0x7F,
+ .debounce = 0x7EF4,
+ },
+ {
+ .freq = 19200000,
+ .enable_delay = 0x03,
+ .stable_count = 0x4B,
+ .active_delay = 0x06,
+ .xtal_freq_count = 0xBB,
+ .debounce = 0xBB80,
+ },
+ {
+ .freq = 26000000,
+ .enable_delay = 0x04,
+ .stable_count = 0x66,
+ .active_delay = 0x09,
+ .xtal_freq_count = 0xFE,
+ .debounce = 0xFDE8,
+ },
+};
+
+static struct tegra_utmip_config utmip_default[] = {
+ [0] = {
+ .hssync_start_delay = 9,
+ .idle_wait_delay = 17,
+ .elastic_limit = 16,
+ .term_range_adj = 6,
+ .xcvr_setup = 9,
+ .xcvr_lsfslew = 1,
+ .xcvr_lsrslew = 1,
+ },
+ [2] = {
+ .hssync_start_delay = 9,
+ .idle_wait_delay = 17,
+ .elastic_limit = 16,
+ .term_range_adj = 6,
+ .xcvr_setup = 9,
+ .xcvr_lsfslew = 2,
+ .xcvr_lsrslew = 2,
+ },
+};
+
+static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
+{
+ return (phy->instance == 1);
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+ phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+ if (IS_ERR(phy->pad_clk)) {
+ pr_err("%s: can't get utmip pad clock\n", __func__);
+ return PTR_ERR(phy->pad_clk);
+ }
+
+ if (phy->instance == 0) {
+ phy->pad_regs = phy->regs;
+ } else {
+ phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
+ if (!phy->pad_regs) {
+ pr_err("%s: can't remap usb registers\n", __func__);
+ clk_put(phy->pad_clk);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static void utmip_pad_close(struct tegra_usb_phy *phy)
+{
+ if (phy->instance != 0)
+ iounmap(phy->pad_regs);
+ clk_put(phy->pad_clk);
+}
+
+static void utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+ unsigned long val, flags;
+ void __iomem *base = phy->pad_regs;
+
+ clk_enable(phy->pad_clk);
+
+ spin_lock_irqsave(&utmip_pad_lock, flags);
+
+ if (utmip_pad_count++ == 0) {
+ val = readl(base + UTMIP_BIAS_CFG0);
+ val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+ writel(val, base + UTMIP_BIAS_CFG0);
+ }
+
+ spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+ clk_disable(phy->pad_clk);
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+ unsigned long val, flags;
+ void __iomem *base = phy->pad_regs;
+
+ if (!utmip_pad_count) {
+ pr_err("%s: utmip pad already powered off\n", __func__);
+ return -EINVAL;
+ }
+
+ clk_enable(phy->pad_clk);
+
+ spin_lock_irqsave(&utmip_pad_lock, flags);
+
+ if (--utmip_pad_count == 0) {
+ val = readl(base + UTMIP_BIAS_CFG0);
+ val |= UTMIP_OTGPD | UTMIP_BIASPD;
+ writel(val, base + UTMIP_BIAS_CFG0);
+ }
+
+ spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+ clk_disable(phy->pad_clk);
+
+ return 0;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+ unsigned long timeout = 2000;
+ do {
+ if ((readl(reg) & mask) == result)
+ return 0;
+ udelay(1);
+ timeout--;
+ } while (timeout);
+ return -1;
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ if (phy->instance == 0) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ udelay(10);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ if (phy->instance == 2) {
+ val = readl(base + USB_PORTSC1);
+ val |= USB_PORTSC1_PHCD;
+ writel(val, base + USB_PORTSC1);
+ }
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
+ pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ if (phy->instance == 0) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+
+ udelay(10);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ if (phy->instance == 2) {
+ val = readl(base + USB_PORTSC1);
+ val &= ~USB_PORTSC1_PHCD;
+ writel(val, base + USB_PORTSC1);
+ }
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+ USB_PHY_CLK_VALID))
+ pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+ struct tegra_utmip_config *config = phy->config;
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ if (phy->instance == 0) {
+ val = readl(base + USB1_LEGACY_CTRL);
+ val |= USB1_NO_LEGACY_MODE;
+ writel(val, base + USB1_LEGACY_CTRL);
+ }
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val &= ~UTMIP_FS_PREABMLE_J;
+ writel(val, base + UTMIP_TX_CFG0);
+
+ val = readl(base + UTMIP_HSRX_CFG0);
+ val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+ val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+ val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+ writel(val, base + UTMIP_HSRX_CFG0);
+
+ val = readl(base + UTMIP_HSRX_CFG1);
+ val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+ val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+ writel(val, base + UTMIP_HSRX_CFG1);
+
+ val = readl(base + UTMIP_DEBOUNCE_CFG0);
+ val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+ val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+ writel(val, base + UTMIP_DEBOUNCE_CFG0);
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+ writel(val, base + UTMIP_MISC_CFG0);
+
+ val = readl(base + UTMIP_MISC_CFG1);
+ val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
+ val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+ UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+ writel(val, base + UTMIP_MISC_CFG1);
+
+ val = readl(base + UTMIP_PLL_CFG1);
+ val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+ val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+ UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+ writel(val, base + UTMIP_PLL_CFG1);
+
+ if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ utmip_pad_power_on(phy);
+
+ val = readl(base + UTMIP_XCVR_CFG0);
+ val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
+ UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
+ UTMIP_XCVR_HSSLEW_MSB(~0));
+ val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+ val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+ val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+ writel(val, base + UTMIP_XCVR_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG1);
+ val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+ val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+ writel(val, base + UTMIP_XCVR_CFG1);
+
+ val = readl(base + UTMIP_BAT_CHRG_CFG0);
+ val &= ~UTMIP_PD_CHRG;
+ writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+ val = readl(base + UTMIP_BIAS_CFG1);
+ val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+ val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+ writel(val, base + UTMIP_BIAS_CFG1);
+
+ if (phy->instance == 0) {
+ val = readl(base + UTMIP_SPARE_CFG0);
+ if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
+ val &= ~FUSE_SETUP_SEL;
+ else
+ val |= FUSE_SETUP_SEL;
+ writel(val, base + UTMIP_SPARE_CFG0);
+ }
+
+ if (phy->instance == 2) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_PHY_ENABLE;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ if (phy->instance == 0) {
+ val = readl(base + USB1_LEGACY_CTRL);
+ val &= ~USB1_VBUS_SENSE_CTL_MASK;
+ val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+ writel(val, base + USB1_LEGACY_CTRL);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ utmi_phy_clk_enable(phy);
+
+ if (phy->instance == 2) {
+ val = readl(base + USB_PORTSC1);
+ val &= ~USB_PORTSC1_PTS(~0);
+ writel(val, base + USB_PORTSC1);
+ }
+
+ return 0;
+}
+
+static void utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ utmi_phy_clk_disable(phy);
+
+ if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+ val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = readl(base + UTMIP_BAT_CHRG_CFG0);
+ val |= UTMIP_PD_CHRG;
+ writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG0);
+ val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN;
+ writel(val, base + UTMIP_XCVR_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG1);
+ val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN;
+ writel(val, base + UTMIP_XCVR_CFG1);
+
+ utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val |= UTMIP_HS_DISCON_DISABLE;
+ writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val &= ~UTMIP_HS_DISCON_DISABLE;
+ writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+ if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+ else
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(1);
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val |= UTMIP_DPDM_OBSERVE;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(10);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(10);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ int ret;
+ unsigned long val;
+ void __iomem *base = phy->regs;
+ struct tegra_ulpi_config *config = phy->config;
+
+ gpio_direction_output(config->reset_gpio, 0);
+ msleep(5);
+ gpio_direction_output(config->reset_gpio, 1);
+
+ clk_enable(phy->clk);
+ msleep(1);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UHSIC_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = readl(base + ULPI_TIMING_CTRL_0);
+ val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+ writel(val, base + ULPI_TIMING_CTRL_0);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= ULPI_PHY_ENABLE;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = 0;
+ writel(val, base + ULPI_TIMING_CTRL_1);
+
+ val |= ULPI_DATA_TRIMMER_SEL(4);
+ val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+ val |= ULPI_DIR_TRIMMER_SEL(4);
+ writel(val, base + ULPI_TIMING_CTRL_1);
+ udelay(10);
+
+ val |= ULPI_DATA_TRIMMER_LOAD;
+ val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+ val |= ULPI_DIR_TRIMMER_LOAD;
+ writel(val, base + ULPI_TIMING_CTRL_1);
+
+ /* Fix VbusInvalid due to floating VBUS */
+ ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+ if (ret) {
+ pr_err("%s: ulpi write failed\n", __func__);
+ return ret;
+ }
+
+ ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+ if (ret) {
+ pr_err("%s: ulpi write failed\n", __func__);
+ return ret;
+ }
+
+ val = readl(base + USB_PORTSC1);
+ val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
+ writel(val, base + USB_PORTSC1);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+ udelay(100);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+
+ return 0;
+}
+
+static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+ struct tegra_ulpi_config *config = phy->config;
+
+ /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
+ * Controller to immediately bring the ULPI PHY out of low power
+ */
+ val = readl(base + USB_PORTSC1);
+ val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
+ writel(val, base + USB_PORTSC1);
+
+ gpio_direction_output(config->reset_gpio, 0);
+ clk_disable(phy->clk);
+}
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+ void *config, enum tegra_usb_phy_mode phy_mode)
+{
+ struct tegra_usb_phy *phy;
+ struct tegra_ulpi_config *ulpi_config;
+ unsigned long parent_rate;
+ int i;
+ int err;
+
+ phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
+ if (!phy)
+ return ERR_PTR(-ENOMEM);
+
+ phy->instance = instance;
+ phy->regs = regs;
+ phy->config = config;
+ phy->mode = phy_mode;
+
+ if (!phy->config) {
+ if (phy_is_ulpi(phy)) {
+ pr_err("%s: ulpi phy configuration missing", __func__);
+ err = -EINVAL;
+ goto err0;
+ } else {
+ phy->config = &utmip_default[instance];
+ }
+ }
+
+ phy->pll_u = clk_get_sys(NULL, "pll_u");
+ if (IS_ERR(phy->pll_u)) {
+ pr_err("Can't get pll_u clock\n");
+ err = PTR_ERR(phy->pll_u);
+ goto err0;
+ }
+ clk_enable(phy->pll_u);
+
+ parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+ for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+ if (tegra_freq_table[i].freq == parent_rate) {
+ phy->freq = &tegra_freq_table[i];
+ break;
+ }
+ }
+ if (!phy->freq) {
+ pr_err("invalid pll_u parent rate %ld\n", parent_rate);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ if (phy_is_ulpi(phy)) {
+ ulpi_config = config;
+ phy->clk = clk_get_sys(NULL, ulpi_config->clk);
+ if (IS_ERR(phy->clk)) {
+ pr_err("%s: can't get ulpi clock\n", __func__);
+ err = -ENXIO;
+ goto err1;
+ }
+ tegra_gpio_enable(ulpi_config->reset_gpio);
+ gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
+ gpio_direction_output(ulpi_config->reset_gpio, 0);
+ phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+ phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
+ } else {
+ err = utmip_pad_open(phy);
+ if (err < 0)
+ goto err1;
+ }
+
+ return phy;
+
+err1:
+ clk_disable(phy->pll_u);
+ clk_put(phy->pll_u);
+err0:
+ kfree(phy);
+ return ERR_PTR(err);
+}
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+ if (phy_is_ulpi(phy))
+ return ulpi_phy_power_on(phy);
+ else
+ return utmi_phy_power_on(phy);
+}
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+ if (phy_is_ulpi(phy))
+ ulpi_phy_power_off(phy);
+ else
+ utmi_phy_power_off(phy);
+}
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_preresume(phy);
+}
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_postresume(phy);
+}
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_restore_start(phy, port_speed);
+}
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_restore_end(phy);
+}
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_clk_disable(phy);
+}
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+ if (!phy_is_ulpi(phy))
+ utmi_phy_clk_enable(phy);
+}
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy)
+{
+ if (phy_is_ulpi(phy))
+ clk_put(phy->clk);
+ else
+ utmip_pad_close(phy);
+ clk_disable(phy->pll_u);
+ clk_put(phy->pll_u);
+ kfree(phy);
+}
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 3/4] usb: host: Add EHCI driver for NVIDIA Tegra SoCs
[not found] ` <1297895962-28590-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
2011-02-16 22:39 ` [PATCH v2 1/4] usb: otg: Add ulpi viewport access ops Benoit Goby
2011-02-16 22:39 ` [PATCH v2 2/4] ARM: tegra: Add support for Tegra USB PHYs Benoit Goby
@ 2011-02-16 22:39 ` Benoit Goby
2011-02-16 22:39 ` [PATCH v2 4/4] USB: ehci: tegra: Align DMA transfers to 32 bytes Benoit Goby
3 siblings, 0 replies; 6+ messages in thread
From: Benoit Goby @ 2011-02-16 22:39 UTC (permalink / raw)
To: David Brownell, Greg Kroah-Hartman,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Robert Morell
Cc: Benoit Goby, Olof Johansson, Erik Gilling,
linux-tegra-u79uwXL29TY76Z2rM5mHXA
Signed-off-by: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
---
drivers/usb/host/Kconfig | 8 +
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-tegra.c | 626 +++++++++++++++++++++++++++++++++++++++++
include/linux/tegra_usb.h | 35 +++
4 files changed, 674 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/ehci-tegra.c
create mode 100644 include/linux/tegra_usb.h
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0..aa61cc5 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -152,6 +152,14 @@ config USB_EHCI_MSM
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+config USB_EHCI_TEGRA
+ boolean "NVIDIA Tegra HCD support"
+ depends on USB_EHCI_HCD && ARCH_TEGRA
+ select USB_EHCI_ROOT_HUB_TT
+ help
+ This driver enables support for the internal USB Host Controller
+ found in NVIDIA Tegra SoCs. The Tegra controller is EHCI compliant.
+
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
depends on USB_EHCI_HCD && PPC_OF
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 30515d3..3cbedce 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1245,6 +1245,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_msm_driver
#endif
+#ifdef CONFIG_USB_EHCI_TEGRA
+#include "ehci-tegra.c"
+#define PLATFORM_DRIVER tegra_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
new file mode 100644
index 0000000..5c5ee91
--- /dev/null
+++ b/drivers/usb/host/ehci-tegra.c
@@ -0,0 +1,626 @@
+/*
+ * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2009 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/tegra_usb.h>
+#include <linux/irq.h>
+#include <linux/usb/otg.h>
+#include <mach/usb_phy.h>
+
+#define TEGRA_USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
+
+struct tegra_ehci_hcd {
+ struct ehci_hcd *ehci;
+ struct tegra_usb_phy *phy;
+ struct clk *clk;
+ struct clk *emc_clk;
+ struct otg_transceiver *transceiver;
+ int host_resumed;
+ int bus_suspended;
+ int port_resuming;
+ int power_down_on_bus_suspend;
+ enum tegra_usb_phy_port_speed port_speed;
+};
+
+static void tegra_ehci_power_up(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+ clk_enable(tegra->emc_clk);
+ clk_enable(tegra->clk);
+ tegra_usb_phy_power_on(tegra->phy);
+ tegra->host_resumed = 1;
+}
+
+static void tegra_ehci_power_down(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+ tegra->host_resumed = 0;
+ tegra_usb_phy_power_off(tegra->phy);
+ clk_disable(tegra->clk);
+ clk_disable(tegra->emc_clk);
+}
+
+static int tegra_ehci_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+ u32 __iomem *status_reg;
+ u32 temp;
+ unsigned long flags;
+ int retval = 0;
+
+ status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ /*
+ * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
+ * that are write on clear, by writing back the register read value, so
+ * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
+ */
+ if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
+ temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
+ ehci_writel(ehci, temp & ~PORT_PE, status_reg);
+ goto done;
+ }
+
+ else if (typeReq == GetPortStatus) {
+ temp = ehci_readl(ehci, status_reg);
+ if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
+ /* Resume completed, re-enable disconnect detection */
+ tegra->port_resuming = 0;
+ tegra_usb_phy_postresume(tegra->phy);
+ }
+ }
+
+ else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+ /*
+ * If a transaction is in progress, there may be a delay in
+ * suspending the port. Poll until the port is suspended.
+ */
+ if (handshake(ehci, status_reg, PORT_SUSPEND,
+ PORT_SUSPEND, 5000))
+ pr_err("%s: timeout waiting for SUSPEND\n", __func__);
+
+ set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+ goto done;
+ }
+
+ /*
+ * Tegra host controller will time the resume operation to clear the bit
+ * when the port control state switches to HS or FS Idle. This behavior
+ * is different from EHCI where the host controller driver is required
+ * to set this bit to a zero after the resume duration is timed in the
+ * driver.
+ */
+ else if (typeReq == ClearPortFeature &&
+ wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ if (!(temp & PORT_SUSPEND))
+ goto done;
+
+ /* Disable disconnect detection during port resume */
+ tegra_usb_phy_preresume(tegra->phy);
+
+ ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
+
+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+ /* start resume signalling */
+ ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ msleep(20);
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ /* Poll until the controller clears RESUME and SUSPEND */
+ if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
+ pr_err("%s: timeout waiting for RESUME\n", __func__);
+ if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
+ pr_err("%s: timeout waiting for SUSPEND\n", __func__);
+
+ ehci->reset_done[wIndex-1] = 0;
+
+ tegra->port_resuming = 1;
+ goto done;
+ }
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* Handle the hub control events here */
+ return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return retval;
+}
+
+static void tegra_ehci_restart(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ ehci_reset(ehci);
+
+ /* setup the frame list and Async q heads */
+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ /* setup the command register and set the controller in RUN mode */
+ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+ ehci->command |= CMD_RUN;
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+
+ down_write(&ehci_cf_port_reset_rwsem);
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ /* flush posted writes */
+ ehci_readl(ehci, &ehci->regs->command);
+ up_write(&ehci_cf_port_reset_rwsem);
+}
+
+static int tegra_usb_suspend(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+ struct ehci_regs __iomem *hw = tegra->ehci->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tegra->ehci->lock, flags);
+
+ tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+ ehci_halt(tegra->ehci);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&tegra->ehci->lock, flags);
+
+ tegra_ehci_power_down(hcd);
+ return 0;
+}
+
+static int tegra_usb_resume(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long val;
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ tegra_ehci_power_up(hcd);
+
+ if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+ /* Wait for the phy to detect new devices
+ * before we restart the controller */
+ msleep(10);
+ goto restart;
+ }
+
+ /* Force the phy to keep data lines in suspend state */
+ tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+ /* Enable host mode */
+ tdi_reset(ehci);
+
+ /* Enable Port Power */
+ val = readl(&hw->port_status[0]);
+ val |= PORT_POWER;
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Check if the phy resume from LP0. When the phy resume from LP0
+ * USB register will be reset. */
+ if (!readl(&hw->async_next)) {
+ /* Program the field PTC based on the saved speed mode */
+ val = readl(&hw->port_status[0]);
+ val &= ~(TEGRA_USB_PORTSC1_PTC(~0));
+ if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ val |= TEGRA_USB_PORTSC1_PTC(5);
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+ val |= TEGRA_USB_PORTSC1_PTC(6);
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= TEGRA_USB_PORTSC1_PTC(7);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Disable test mode by setting PTC field to NORMAL_OP */
+ val = readl(&hw->port_status[0]);
+ val &= ~(TEGRA_USB_PORTSC1_PTC(~0));
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+ }
+
+ /* Poll until CCS is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+ PORT_CONNECT, 2000)) {
+ pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+ goto restart;
+ }
+
+ /* Poll until PE is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_PE,
+ PORT_PE, 2000)) {
+ pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+ goto restart;
+ }
+
+ /* Clear the PCI status, to avoid an interrupt taken upon resume */
+ val = readl(&hw->status);
+ val |= STS_PCD;
+ writel(val, &hw->status);
+
+ /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+ val = readl(&hw->port_status[0]);
+ if ((val & PORT_POWER) && (val & PORT_PE)) {
+ val |= PORT_SUSPEND;
+ writel(val, &hw->port_status[0]);
+
+ /* Wait until port suspend completes */
+ if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+ PORT_SUSPEND, 1000)) {
+ pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+ __func__);
+ goto restart;
+ }
+ }
+
+ tegra_ehci_phy_restore_end(tegra->phy);
+ return 0;
+
+restart:
+ if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ tegra_ehci_phy_restore_end(tegra->phy);
+
+ tegra_ehci_restart(hcd);
+ return 0;
+}
+
+static void tegra_ehci_shutdown(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+ /* ehci_shutdown touches the USB controller registers, make sure
+ * controller has clocks to it */
+ if (!tegra->host_resumed)
+ tegra_ehci_power_up(hcd);
+
+ ehci_shutdown(hcd);
+}
+
+static int tegra_ehci_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ /* EHCI registers start at offset 0x100 */
+ ehci->caps = hcd->regs + 0x100;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ /* switch to host mode */
+ hcd->has_tt = 1;
+ ehci_reset(ehci);
+
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci->sbrn = 0x20;
+
+ ehci_port_power(ehci, 1);
+ return retval;
+}
+
+#ifdef CONFIG_PM
+static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+ int error_status = 0;
+
+ error_status = ehci_bus_suspend(hcd);
+ if (!error_status && tegra->power_down_on_bus_suspend) {
+ tegra_usb_suspend(hcd);
+ tegra->bus_suspended = 1;
+ }
+
+ return error_status;
+}
+
+static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
+{
+ struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+ if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
+ tegra_usb_resume(hcd);
+ tegra->bus_suspended = 0;
+ }
+
+ tegra_usb_phy_preresume(tegra->phy);
+ tegra->port_resuming = 1;
+ return ehci_bus_resume(hcd);
+}
+#endif
+
+static const struct hc_driver tegra_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Tegra EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ .flags = HCD_USB2 | HCD_MEMORY,
+
+ .reset = tegra_ehci_setup,
+ .irq = ehci_irq,
+
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = tegra_ehci_shutdown,
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .get_frame_number = ehci_get_frame,
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = tegra_ehci_hub_control,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+#ifdef CONFIG_PM
+ .bus_suspend = tegra_ehci_bus_suspend,
+ .bus_resume = tegra_ehci_bus_resume,
+#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+static int tegra_ehci_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct usb_hcd *hcd;
+ struct tegra_ehci_hcd *tegra;
+ struct tegra_ehci_platform_data *pdata;
+ int err = 0;
+ int irq;
+ int instance = pdev->id;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "Platform data missing\n");
+ return -EINVAL;
+ }
+
+ tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ dev_err(&pdev->dev, "Unable to create HCD\n");
+ err = -ENOMEM;
+ goto fail_hcd;
+ }
+
+ platform_set_drvdata(pdev, tegra);
+
+ tegra->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(tegra->clk)) {
+ dev_err(&pdev->dev, "Can't get ehci clock\n");
+ err = PTR_ERR(tegra->clk);
+ goto fail_clk;
+ }
+
+ err = clk_enable(tegra->clk);
+ if (err)
+ goto fail_clken;
+
+ tegra->emc_clk = clk_get(&pdev->dev, "emc");
+ if (IS_ERR(tegra->emc_clk)) {
+ dev_err(&pdev->dev, "Can't get emc clock\n");
+ err = PTR_ERR(tegra->emc_clk);
+ goto fail_emc_clk;
+ }
+
+ clk_enable(tegra->emc_clk);
+ clk_set_rate(tegra->emc_clk, 400000000);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ err = -ENXIO;
+ goto fail_io;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = ioremap(res->start, resource_size(res));
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ err = -ENOMEM;
+ goto fail_io;
+ }
+
+ tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
+ TEGRA_USB_PHY_MODE_HOST);
+ if (IS_ERR(tegra->phy)) {
+ dev_err(&pdev->dev, "Failed to open USB phy\n");
+ err = -ENXIO;
+ goto fail_phy;
+ }
+
+ tegra_usb_phy_power_on(tegra->phy);
+
+ tegra->host_resumed = 1;
+ tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
+ tegra->ehci = hcd_to_ehci(hcd);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "Failed to get IRQ\n");
+ err = -ENODEV;
+ goto fail;
+ }
+ set_irq_flags(irq, IRQF_VALID);
+
+#ifdef CONFIG_USB_OTG_UTILS
+ if (pdata->operating_mode == TEGRA_USB_OTG) {
+ tegra->transceiver = otg_get_transceiver();
+ if (tegra->transceiver)
+ otg_set_host(tegra->transceiver, &hcd->self);
+ }
+#endif
+
+ err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add USB HCD\n");
+ goto fail;
+ }
+
+ return err;
+
+fail:
+#ifdef CONFIG_USB_OTG_UTILS
+ if (tegra->transceiver) {
+ otg_set_host(tegra->transceiver, NULL);
+ otg_put_transceiver(tegra->transceiver);
+ }
+#endif
+ tegra_usb_phy_close(tegra->phy);
+fail_phy:
+ iounmap(hcd->regs);
+fail_io:
+ clk_disable(tegra->emc_clk);
+ clk_put(tegra->emc_clk);
+fail_emc_clk:
+ clk_disable(tegra->clk);
+fail_clken:
+ clk_put(tegra->clk);
+fail_clk:
+ usb_put_hcd(hcd);
+fail_hcd:
+ kfree(tegra);
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int tegra_ehci_resume(struct platform_device *pdev)
+{
+ struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+ if (tegra->bus_suspended)
+ return 0;
+
+ return tegra_usb_resume(hcd);
+}
+
+static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+ if (tegra->bus_suspended)
+ return 0;
+
+ if (time_before(jiffies, tegra->ehci->next_statechange))
+ msleep(10);
+
+ return tegra_usb_suspend(hcd);
+}
+#endif
+
+static int tegra_ehci_remove(struct platform_device *pdev)
+{
+ struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+ if (tegra == NULL || hcd == NULL)
+ return -EINVAL;
+
+#ifdef CONFIG_USB_OTG_UTILS
+ if (tegra->transceiver) {
+ otg_set_host(tegra->transceiver, NULL);
+ otg_put_transceiver(tegra->transceiver);
+ }
+#endif
+
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+
+ tegra_usb_phy_close(tegra->phy);
+ iounmap(hcd->regs);
+
+ clk_disable(tegra->clk);
+ clk_put(tegra->clk);
+
+ clk_disable(tegra->emc_clk);
+ clk_put(tegra->emc_clk);
+
+ kfree(tegra);
+ return 0;
+}
+
+static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
+{
+ struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver tegra_ehci_driver = {
+ .probe = tegra_ehci_probe,
+ .remove = tegra_ehci_remove,
+#ifdef CONFIG_PM
+ .suspend = tegra_ehci_suspend,
+ .resume = tegra_ehci_resume,
+#endif
+ .shutdown = tegra_ehci_hcd_shutdown,
+ .driver = {
+ .name = "tegra-ehci",
+ }
+};
diff --git a/include/linux/tegra_usb.h b/include/linux/tegra_usb.h
new file mode 100644
index 0000000..2947ed2
--- /dev/null
+++ b/include/linux/tegra_usb.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+enum tegra_usb_operating_modes {
+ TEGRA_USB_DEVICE,
+ TEGRA_USB_HOST,
+ TEGRA_USB_OTG,
+};
+
+struct tegra_ehci_platform_data {
+ enum tegra_usb_operating_modes operating_mode;
+ /* power down the phy on bus suspend */
+ int power_down_on_bus_suspend;
+ void *phy_config;
+};
+
+#endif /* _TEGRA_USB_H_ */
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 4/4] USB: ehci: tegra: Align DMA transfers to 32 bytes
[not found] ` <1297895962-28590-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
` (2 preceding siblings ...)
2011-02-16 22:39 ` [PATCH v2 3/4] usb: host: Add EHCI driver for NVIDIA Tegra SoCs Benoit Goby
@ 2011-02-16 22:39 ` Benoit Goby
3 siblings, 0 replies; 6+ messages in thread
From: Benoit Goby @ 2011-02-16 22:39 UTC (permalink / raw)
To: David Brownell, Greg Kroah-Hartman,
linux-usb-u79uwXL29TY76Z2rM5mHXA
Cc: Benoit Goby, Olof Johansson, Erik Gilling,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Robert Morell
From: Robert Morell <rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The Tegra2 USB controller doesn't properly deal with misaligned DMA
buffers, causing corruption. This is especially prevalent with USB
network adapters, where skbuff alignment is often in the middle of a
4-byte dword.
To avoid this, allocate a temporary buffer for the DMA if the provided
buffer isn't sufficiently aligned.
Signed-off-by: Robert Morell <rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
---
drivers/usb/host/ehci-tegra.c | 90 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 90 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 5c5ee91..c64d629 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -28,6 +28,8 @@
#define TEGRA_USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
+#define TEGRA_USB_DMA_ALIGN 32
+
struct tegra_ehci_hcd {
struct ehci_hcd *ehci;
struct tegra_usb_phy *phy;
@@ -388,6 +390,92 @@ static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
}
#endif
+struct temp_buffer {
+ void *kmalloc_ptr;
+ void *old_xfer_buffer;
+ u8 data[0];
+};
+
+static void free_temp_buffer(struct urb *urb)
+{
+ enum dma_data_direction dir;
+ struct temp_buffer *temp;
+
+ if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+ return;
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ temp = container_of(urb->transfer_buffer, struct temp_buffer,
+ data);
+
+ if (dir == DMA_FROM_DEVICE)
+ memcpy(temp->old_xfer_buffer, temp->data,
+ urb->transfer_buffer_length);
+ urb->transfer_buffer = temp->old_xfer_buffer;
+ kfree(temp->kmalloc_ptr);
+
+ urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+ enum dma_data_direction dir;
+ struct temp_buffer *temp, *kmalloc_ptr;
+ size_t kmalloc_size;
+
+ if (urb->num_sgs || urb->sg ||
+ urb->transfer_buffer_length == 0 ||
+ !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
+ return 0;
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ /* Allocate a buffer with enough padding for alignment */
+ kmalloc_size = urb->transfer_buffer_length +
+ sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1;
+
+ kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+ if (!kmalloc_ptr)
+ return -ENOMEM;
+
+ /* Position our struct temp_buffer such that data is aligned */
+ temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
+
+ temp->kmalloc_ptr = kmalloc_ptr;
+ temp->old_xfer_buffer = urb->transfer_buffer;
+ if (dir == DMA_TO_DEVICE)
+ memcpy(temp->data, urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ urb->transfer_buffer = temp->data;
+
+ urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+ return 0;
+}
+
+static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ int ret;
+
+ ret = alloc_temp_buffer(urb, mem_flags);
+ if (ret)
+ return ret;
+
+ ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+ if (ret)
+ free_temp_buffer(urb);
+
+ return ret;
+}
+
+static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ usb_hcd_unmap_urb_for_dma(hcd, urb);
+ free_temp_buffer(urb);
+}
+
static const struct hc_driver tegra_ehci_hc_driver = {
.description = hcd_name,
.product_desc = "Tegra EHCI Host Controller",
@@ -403,6 +491,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
.shutdown = tegra_ehci_shutdown,
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
+ .map_urb_for_dma = tegra_ehci_map_urb_for_dma,
+ .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread