From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Arend van Spriel <arend-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
"Franky (Zhenhui) Lin"
<frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
"rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org"
<rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Rakesh Kumar <krakesh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Laxman Dewangan
<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"brcm80211-dev-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org"
<brcm80211-dev-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Subject: Re: [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB
Date: Tue, 28 Aug 2012 19:13:33 +0800 [thread overview]
Message-ID: <1346152413.3516.211.camel@tegra-chromium-2> (raw)
In-Reply-To: <503BD345.6030501-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
On Tue, 2012-08-28 at 04:06 +0800, Stephen Warren wrote:
> On 08/27/2012 09:24 AM, Arend van Spriel wrote:
> > On 08/27/2012 12:25 PM, Wei Ni wrote:
> >> In case of inband interrupts, if we handle the interrupt in dpc thread,
> >> two level of thread switching takes place to process wifi interrupts.
> >> One in SDHCI driver and the other in Wifi driver. This may cause the
> >> system
> >> instability.
> >
> > Looking into the sdhci/mmc code indeed shows that the brcmfmac irq
> > handler is not called in true IRQ context. So the dpc thread may add
> > unnecessary complexity, but to me there is not indication that there is
> > a stability issue.
The brcmfmac irq handler is called in the thread sdio_irq_thread(), this
thread indeed is driven by the sdhci irq, although it's not the true IRQ
context. If the brcmfmac doesn't clear the IRQ condition ASAP, the
sdio_irq_thread will be triggered again and again, and in this condition
it's too difficult to run the brcmfmac dpc thread, more and more
interrupt can't be handled.
> >
> >> Because the SDHCI calls sdio_irq_thread() to handle the irq, this
> >> thread locks
> >> mmc host and calls wifi handler. It expects WiFi handler to be quick and
> >> enables sdio interrupt from card at end. If wifi handler defers this
> >> work for
> >> a different thread, sdio_irq_thread() will be stuck on next wifi
> >> interrupt
> >> since mmc lock is not freed.
> >
> > Not sure if I can follow this explanation. The isr is called with host
> > claimed (by sdio_irq_thread) and all it does is at a linked list member
> > and signal the dpc thread. After doing this the host is released.
>
> Is the issue something like the ISR handler or first level of threading
> does:
>
> * Trigger DPC
> * Re-enable interrupt
>
> So that the interrupt then fires again before the triggered DPC can run
> to handle/clear it, thus causing an interrupt storm?
>
> Whereas handling the interrupt directly prevents this race condition?
Above is my understanding.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-28 11:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 10:25 [PATCH 0/6] ARM: tegra: enable wlan for t20 and t30 Wei Ni
[not found] ` <1346063114-30361-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-08-27 10:25 ` [PATCH 1/6] ARM: tegra: set up wlan clocks for tegra dt Wei Ni
2012-08-27 10:25 ` [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB Wei Ni
[not found] ` <1346063114-30361-3-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-08-27 16:24 ` Arend van Spriel
2012-08-27 20:06 ` Stephen Warren
[not found] ` <503BD345.6030501-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-08-28 11:13 ` Wei Ni [this message]
2012-08-28 16:45 ` Franky Lin
[not found] ` <503CF5B3.8040201-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-08-28 22:39 ` Stephen Warren
2012-08-28 23:01 ` Franky Lin
[not found] ` <503D4DD9.2060808-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-08-28 23:04 ` Stephen Warren
[not found] ` <503D4E7F.9010205-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-08-28 23:10 ` Franky Lin
[not found] ` <503B9F31.5050502-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-08-28 6:08 ` Wei Ni
2012-08-27 10:25 ` [PATCH 3/6] ARM: dt: t20 seaboard: turn on the power for wlan Wei Ni
2012-08-27 10:25 ` [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and " Wei Ni
2012-08-27 10:25 ` [PATCH 5/6] ARM: dt: t30 cardhu: " Wei Ni
2012-08-27 10:25 ` [PATCH 6/6] ARM: tegra: enable wireless in defconfig Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346152413.3516.211.camel@tegra-chromium-2 \
--to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=arend-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=brcm80211-dev-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=krakesh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox