linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V4 5/9] ARM: dts: tegra: add power gpio keys to DT
Date: Mon, 18 Mar 2013 16:13:16 +0800	[thread overview]
Message-ID: <1363594400-11663-6-git-send-email-josephl@nvidia.com> (raw)
In-Reply-To: <1363594400-11663-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

This adds the power gpio key to DT and enable the wakeup of the gpio key
for the device. The Seaboard and paz00 already had the power gpio key
binding and the power key of Whistler was on KBC. So these boards' device
tree didn't include in this patch.

Signed-off-by: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V4:
* no change
V3:
* no change
V2:
* no change
---
 arch/arm/boot/dts/tegra20-harmony.dts   | 11 +++++++++++
 arch/arm/boot/dts/tegra20-trimslice.dts | 11 +++++++++++
 arch/arm/boot/dts/tegra20-ventana.dts   | 11 +++++++++++
 3 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 1f79c0d..3532853 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -568,6 +568,17 @@
 				0x1F0400D6>;	/* KEY_QUESTION */
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 98f3e44..3cfd9ed 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -335,6 +335,17 @@
 		gpios = <&gpio 191 1>; /* gpio PX7, active low */
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 190 1>; /* gpio PX6, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 4aef56f..ede91c0 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -531,6 +531,17 @@
 		bus-width = <8>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
-- 
1.8.1.5

  parent reply	other threads:[~2013-03-18  8:13 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-18  8:13 [PATCH V4 0/9] ARM: tegra: add platform suspend support Joseph Lo
     [not found] ` <1363594400-11663-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-18  8:13   ` [PATCH V4 1/9] gpio: tegra: add gpio wakeup source handling Joseph Lo
     [not found]     ` <1363594400-11663-2-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 16:52       ` Stephen Warren
2013-03-18  8:13   ` [PATCH V4 2/9] ARM: tegra: irq: add wake up handling Joseph Lo
     [not found]     ` <1363594400-11663-3-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 16:55       ` Stephen Warren
2013-03-18  8:13   ` [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC Joseph Lo
     [not found]     ` <1363594400-11663-4-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 17:00       ` Stephen Warren
     [not found]         ` <5148999A.90102-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-19 17:26           ` Stephen Warren
2013-03-18  8:13   ` [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support Joseph Lo
     [not found]     ` <1363594400-11663-5-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 17:07       ` Stephen Warren
     [not found]         ` <51489B5D.3050101-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-20 10:26           ` Joseph Lo
2013-03-18  8:13   ` Joseph Lo [this message]
2013-03-18  8:13   ` [PATCH V4 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC Joseph Lo
2013-03-18  8:13   ` [PATCH V4 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC Joseph Lo
2013-03-18  8:13   ` [PATCH V4 8/9] ARM: tegra: config: defconfig update Joseph Lo
2013-03-18  8:13   ` [PATCH V4 9/9] ARM: dts: tegra: add the PM configurations of PMC Joseph Lo
2013-03-19 16:51   ` [PATCH V4 0/9] ARM: tegra: add platform suspend support Stephen Warren
     [not found]     ` <5148977F.7000700-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-20 10:15       ` Joseph Lo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363594400-11663-6-git-send-email-josephl@nvidia.com \
    --to=josephl-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).