From: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V2 00/11] ARM: tegra114: add support for system suspend
Date: Wed, 3 Jul 2013 17:50:36 +0800 [thread overview]
Message-ID: <1372845047-25147-1-git-send-email-josephl@nvidia.com> (raw)
This series introduce system suspend function for Tegra114 and depend on
the series of "ARM: tegra114: cpuidle: add power down state".
Verified on Seaboard, Cardhu and Dalmore and with THUMB2_KERNEL as well.
V2:
* do some fixes from the comments in the review
Joseph Lo (11):
ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9
ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS
or ALL
ARM: tegra114: set up the correct L2 data RAM latency for Cortex-A15
ARM: tegra114: add low level support code for cluster power down
ARM: tegra114: shut off the CPU rail when the last CPU in suspend
ARM: tegra114: hook tegra_tear_down_cpu function
ARM: tegra114: flowctrl: add support for cpu_suspend_enter/exit
clk: tegra114: add suspend/resume function for tegra_cpu_car_ops
ARM: tegra: remove the limitation that Tegra114 can't support suspend
ARM: dts: tegra114: dalmore: add GPIO power key support
ARM: dts: tegra114: dalmore: add PM configurations for PMC
arch/arm/boot/dts/tegra114-dalmore.dts | 18 ++++++++++++++++++
arch/arm/mach-tegra/flowctrl.c | 2 ++
arch/arm/mach-tegra/flowctrl.h | 7 +++++++
arch/arm/mach-tegra/headsmp.S | 3 ++-
arch/arm/mach-tegra/hotplug.c | 2 +-
arch/arm/mach-tegra/pm.c | 8 +++-----
arch/arm/mach-tegra/pmc.c | 16 +++++++++++++++-
arch/arm/mach-tegra/reset-handler.S | 8 ++++++--
arch/arm/mach-tegra/sleep-tegra20.S | 1 +
arch/arm/mach-tegra/sleep-tegra30.S | 7 ++++++-
arch/arm/mach-tegra/sleep.S | 29 ++++++++++++++++++++++++++++-
arch/arm/mach-tegra/sleep.h | 6 +++++-
drivers/clk/tegra/clk-tegra114.c | 26 ++++++++++++++++++++++++++
13 files changed, 120 insertions(+), 13 deletions(-)
--
1.8.3.2
next reply other threads:[~2013-07-03 9:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-03 9:50 Joseph Lo [this message]
[not found] ` <1372845047-25147-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-03 9:50 ` [PATCH V2 01/11] ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 Joseph Lo
2013-07-03 9:50 ` [PATCH V2 02/11] ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL Joseph Lo
2013-07-03 9:50 ` [PATCH V2 03/11] ARM: tegra114: set up the correct L2 data RAM latency for Cortex-A15 Joseph Lo
2013-07-03 9:50 ` [PATCH V2 04/11] ARM: tegra114: add low level support code for cluster power down Joseph Lo
2013-07-03 9:50 ` [PATCH V2 05/11] ARM: tegra114: shut off the CPU rail when the last CPU in suspend Joseph Lo
2013-07-03 9:50 ` [PATCH V2 06/11] ARM: tegra114: hook tegra_tear_down_cpu function Joseph Lo
2013-07-03 9:50 ` [PATCH V2 07/11] ARM: tegra114: flowctrl: add support for cpu_suspend_enter/exit Joseph Lo
2013-07-03 9:50 ` [PATCH V2 08/11] clk: tegra114: add suspend/resume function for tegra_cpu_car_ops Joseph Lo
2013-07-03 9:50 ` [PATCH V2 09/11] ARM: tegra: remove the limitation that Tegra114 can't support suspend Joseph Lo
2013-07-03 9:50 ` [PATCH V2 10/11] ARM: dts: tegra114: dalmore: add GPIO power key support Joseph Lo
[not found] ` <1372845047-25147-11-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-09 17:03 ` Stephen Warren
[not found] ` <51DC4274.8040607-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-07-10 1:06 ` Joseph Lo
2013-07-03 9:50 ` [PATCH V2 11/11] ARM: dts: tegra114: dalmore: add PM configurations for PMC Joseph Lo
2013-07-19 16:54 ` [PATCH V2 00/11] ARM: tegra114: add support for system suspend Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372845047-25147-1-git-send-email-josephl@nvidia.com \
--to=josephl-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox