From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Zhao Subject: [PATCH] serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS' Date: Sun, 21 Jul 2013 10:43:26 +0800 Message-ID: <1374374607-31183-1-git-send-email-rizhao@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, jslaby-AlSwsSmVLrQ@public.gmane.org, swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org, ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, Richard Zhao List-Id: linux-tegra@vger.kernel.org ttyTHS is consistent with the name used in driver. Signed-off-by: Richard Zhao --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5e3d689..1456673 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -277,7 +277,7 @@ config SERIAL_TEGRA select SERIAL_CORE help Support for the on-chip UARTs on the NVIDIA Tegra series SOCs - providing /dev/ttyHS0, 1, 2, 3 and 4 (note, some machines may not + providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not provide all of these ports, depending on how the serial port are enabled). This driver uses the APB DMA to achieve higher baudrate and better performance. -- 1.8.1.5