public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
	linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org
Cc: lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] hwmon: (lm90) Add support for TI TMP451
Date: Tue, 8 Oct 2013 17:27:37 +0800	[thread overview]
Message-ID: <1381224457-21858-1-git-send-email-wni@nvidia.com> (raw)

TI TMP451 is mostly compatible with ADT7461, except for
local temperature low byte and max conversion rate.
Add support to the LM90 driver.

Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 Documentation/hwmon/lm90 |    6 ++++++
 drivers/hwmon/lm90.c     |   37 +++++++++++++++++++++++++++++--------
 2 files changed, 35 insertions(+), 8 deletions(-)

diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index b466974..e40af89 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -122,6 +122,12 @@ Supported chips:
     Prefix: 'g781'
     Addresses scanned: I2C 0x4c, 0x4d
     Datasheet: Not publicly available from GMT
+  * Texas Instruments TMP451
+    Prefix: 'tmp451'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at NXP website
+               http://www.ti.com/litv/pdf/sbos686
+
 
 Author: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
 
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 82a1ca15..81a7bf6 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -60,6 +60,11 @@
  * This driver also supports the G781 from GMT. This device is compatible
  * with the ADM1032.
  *
+ * This driver also supports TMP451 from Texas Instruments. This device is
+ * supported in both compatibility and extended mode. it's mostly compatible
+ * with ADT7461 except for local temperature low byte register and max
+ * conversion rate.
+ *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
  * concern all supported chipsets, unless mentioned otherwise.
@@ -111,7 +116,7 @@ static const unsigned short normal_i2c[] = {
 	0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
-	max6646, w83l771, max6696, sa56004, g781 };
+	max6646, w83l771, max6696, sa56004, g781, tmp451 };
 
 /*
  * The LM90 registers
@@ -168,6 +173,9 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_DEF_CONVRATE_RVAL	6	/* Def conversion rate register value */
 #define LM90_MAX_CONVRATE_MS	16000	/* Maximum conversion rate in ms */
 
+/* TMP451 registers */
+#define TMP451_REG_R_LOCAL_TEMPL	0x15
+
 /*
  * Device flags
  */
@@ -206,6 +214,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "nct1008", adt7461 },
 	{ "w83l771", w83l771 },
 	{ "sa56004", sa56004 },
+	{ "tmp451", tmp451},
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -294,6 +303,13 @@ static const struct lm90_params lm90_params[] = {
 		.max_convrate = 9,
 		.reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
 	},
+	[tmp451] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+		  | LM90_HAVE_BROKEN_ALERT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 9,
+		.reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
+	}
 };
 
 /*
@@ -718,7 +734,7 @@ static int read_temp8(struct device *dev, int index)
 	struct lm90_data *data = lm90_update_device(dev);
 	int temp;
 
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		temp = temp_from_u8_adt7461(data, data->temp8[index]);
 	else if (data->kind == max6646)
 		temp = temp_from_u8(data->temp8[index]);
@@ -762,7 +778,7 @@ static int write_temp8(struct device *dev, int index, long val)
 		val -= 16000;
 
 	mutex_lock(&data->update_lock);
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		data->temp8[index] = temp_to_u8_adt7461(data, val);
 	else if (data->kind == max6646)
 		data->temp8[index] = temp_to_u8(val);
@@ -803,7 +819,7 @@ static int read_temp11(struct device *dev, int index)
 	struct lm90_data *data = lm90_update_device(dev);
 	int temp;
 
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		temp = temp_from_u16_adt7461(data, data->temp11[index]);
 	else if (data->kind == max6646)
 		temp = temp_from_u16(data->temp11[index]);
@@ -848,7 +864,7 @@ static int write_temp11(struct device *dev, int nr, int index, long val)
 		val -= 16000;
 
 	mutex_lock(&data->update_lock);
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		data->temp11[index] = temp_to_u16_adt7461(data, val);
 	else if (data->kind == max6646)
 		data->temp11[index] = temp_to_u8(val) << 8;
@@ -912,7 +928,7 @@ static ssize_t show_temphyst(struct device *dev,
 	struct lm90_data *data = lm90_update_device(dev);
 	int temp;
 
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
 	else if (data->kind == max6646)
 		temp = temp_from_u8(data->temp8[attr->index]);
@@ -940,7 +956,7 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
 		return err;
 
 	mutex_lock(&data->update_lock);
-	if (data->kind == adt7461)
+	if (data->kind == adt7461 || data->kind == tmp451)
 		temp = temp_from_u8_adt7461(data, data->temp8[2]);
 	else if (data->kind == max6646)
 		temp = temp_from_u8(data->temp8[2]);
@@ -1368,6 +1384,11 @@ static int lm90_detect(struct i2c_client *client,
 		 && (config1 & 0x3F) == 0x00
 		 && convrate <= 0x08)
 			name = "g781";
+	} else
+	if (address == 0x4C
+	 && man_id == 0x55) { /* Texas Instruments */
+		if (chip_id == 0x00)
+			name = "tmp451";
 	}
 
 	if (!name) { /* identification failed */
@@ -1429,7 +1450,7 @@ static void lm90_init_client(struct i2c_client *client)
 	data->config_orig = config;
 
 	/* Check Temperature Range Select */
-	if (data->kind == adt7461) {
+	if (data->kind == adt7461 || data->kind == tmp451) {
 		if (config & 0x04)
 			data->flags |= LM90_FLAG_ADT7461_EXT;
 	}
-- 
1.7.9.5

             reply	other threads:[~2013-10-08  9:27 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-08  9:27 Wei Ni [this message]
     [not found] ` <1381224457-21858-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-08 15:25   ` [PATCH] hwmon: (lm90) Add support for TI TMP451 Guenter Roeck
     [not found]     ` <20131008152550.GA18402-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-10-09  2:30       ` Wei Ni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381224457-21858-1-git-send-email-wni@nvidia.com \
    --to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
    --cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox