From: Alexandre Courbot <acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 0/9] drm/nouveau: support for GK20A, cont'd
Date: Fri, 25 Apr 2014 16:19:47 +0900 [thread overview]
Message-ID: <1398410396-23338-1-git-send-email-acourbot@nvidia.com> (raw)
Changes since v2:
- Enabled software class
- Removed unneeded changes to nouveau_accel_init()
- Replaced use of architecture-private pfn_to_dma() and dma_to_pfn() with
the portable page_to_phys()/phys_to_page()
- Fixed incorrect comment/commit log talking about bytes instead of words
Hope this looks good! Once this gets merged the next set will be to use this
driver on Jetson and Venice2 boards.
Cheers,
Alexandre Courbot (9):
drm/nouveau/bar: only ioremap BAR3 if it exists
drm/nouveau/bar/nvc0: support chips without BAR3
drm/nouveau/ibus: add GK20A support
drm/nouveau/fb: add GK20A support
drm/nouveau/fifo: add GK20A support
drm/nouveau/graph: enable when using external firmware
drm/nouveau/graph: pad firmware code at load time
drm/nouveau/graph: add GK20A support
drm/nouveau: support for probing GK20A
drivers/gpu/drm/nouveau/Makefile | 6 +
drivers/gpu/drm/nouveau/core/engine/device/nve0.c | 17 +++
drivers/gpu/drm/nouveau/core/engine/fifo/gk20a.c | 35 +++++
drivers/gpu/drm/nouveau/core/engine/fifo/nve0.h | 1 +
.../gpu/drm/nouveau/core/engine/graph/ctxgk20a.c | 53 +++++++
.../gpu/drm/nouveau/core/engine/graph/ctxnvc0.h | 9 ++
.../gpu/drm/nouveau/core/engine/graph/ctxnve4.c | 14 +-
drivers/gpu/drm/nouveau/core/engine/graph/gk20a.c | 47 ++++++
drivers/gpu/drm/nouveau/core/engine/graph/nvc0.c | 13 +-
drivers/gpu/drm/nouveau/core/engine/graph/nvc0.h | 2 +
drivers/gpu/drm/nouveau/core/engine/graph/nve4.c | 4 +-
drivers/gpu/drm/nouveau/core/include/engine/fifo.h | 1 +
.../gpu/drm/nouveau/core/include/engine/graph.h | 1 +
drivers/gpu/drm/nouveau/core/include/subdev/fb.h | 1 +
drivers/gpu/drm/nouveau/core/include/subdev/ibus.h | 1 +
drivers/gpu/drm/nouveau/core/subdev/bar/base.c | 6 +-
drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c | 114 +++++++-------
drivers/gpu/drm/nouveau/core/subdev/fb/gk20a.c | 56 +++++++
drivers/gpu/drm/nouveau/core/subdev/fb/priv.h | 1 +
drivers/gpu/drm/nouveau/core/subdev/fb/ramgk20a.c | 167 +++++++++++++++++++++
drivers/gpu/drm/nouveau/core/subdev/ibus/gk20a.c | 103 +++++++++++++
21 files changed, 583 insertions(+), 69 deletions(-)
create mode 100644 drivers/gpu/drm/nouveau/core/engine/fifo/gk20a.c
create mode 100644 drivers/gpu/drm/nouveau/core/engine/graph/ctxgk20a.c
create mode 100644 drivers/gpu/drm/nouveau/core/engine/graph/gk20a.c
create mode 100644 drivers/gpu/drm/nouveau/core/subdev/fb/gk20a.c
create mode 100644 drivers/gpu/drm/nouveau/core/subdev/fb/ramgk20a.c
create mode 100644 drivers/gpu/drm/nouveau/core/subdev/ibus/gk20a.c
--
1.9.2
next reply other threads:[~2014-04-25 7:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-25 7:19 Alexandre Courbot [this message]
2014-04-25 7:19 ` [PATCH v3 7/9] drm/nouveau/graph: pad firmware code at load time Alexandre Courbot
[not found] ` <1398410396-23338-1-git-send-email-acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-04-25 7:19 ` [PATCH v3 1/9] drm/nouveau/bar: only ioremap BAR3 if it exists Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 2/9] drm/nouveau/bar/nvc0: support chips without BAR3 Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 3/9] drm/nouveau/ibus: add GK20A support Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 4/9] drm/nouveau/fb: " Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 5/9] drm/nouveau/fifo: " Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 6/9] drm/nouveau/graph: enable when using external firmware Alexandre Courbot
[not found] ` <1398410396-23338-7-git-send-email-acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-04-28 2:10 ` Ben Skeggs
2014-04-28 6:57 ` [Nouveau] " Thierry Reding
2014-04-28 23:52 ` Ben Skeggs
[not found] ` <CACAvsv51Ju_ZqJfNU5GzzEmDzf2Fr6Xr_5yGRtfqOQRVTgvDPg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-01 4:53 ` Alexandre Courbot
[not found] ` <CAAVeFuK7H3zK3CaxYT4MP4pY=r2dF0oojjYHG1DGRf7Sq0TExg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-01 4:59 ` [Nouveau] " Ben Skeggs
2014-04-25 7:19 ` [PATCH v3 8/9] drm/nouveau/graph: add GK20A support Alexandre Courbot
2014-05-01 7:11 ` [PATCH v3 0/9] drm/nouveau: support for GK20A, cont'd Ben Skeggs
[not found] ` <CACAvsv5x6uZcTGUTa3-wBRo0sJ-557sJ_d8r0kscODhr18yzBA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-01 7:14 ` Alexandre Courbot
2014-04-25 7:19 ` [PATCH v3 9/9] drm/nouveau: support for probing GK20A Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398410396-23338-1-git-send-email-acourbot@nvidia.com \
--to=acourbot-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox