From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Courbot Subject: [PATCH 0/4] drm/dsi/tegra: continuous clock support Date: Wed, 2 Jul 2014 21:19:16 +0900 Message-ID: <1404303560-32209-1-git-send-email-acourbot@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" To: Thierry Reding , Terje Bergstrom , Stephen Warren Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org List-Id: linux-tegra@vger.kernel.org This small series adds support for DSI continuous clock as required by the DSI specification and as needed for NVIDIA SHIELD's panel. Continuous clock mode can be specified as the flags of a DSI device, and host drivers can check this flag to adapt their behavior. The flag is then added to the panel embedded in NVIDIA SHIELD, which allows us to finally enable the panel in its device tree. Alexandre Courbot (4): drm/dsi: Add flag for continuous clock behavior drm/tegra: dsi - Handle continuous clock flag drm/panel: LG LH500WX1-SD03 uses continuous clock ARM: tegra: roth: add display DT node arch/arm/boot/dts/tegra114-roth.dts | 23 ++++++++++++++++++++--- drivers/gpu/drm/panel/panel-simple.c | 2 +- drivers/gpu/drm/tegra/dsi.c | 3 ++- include/drm/drm_mipi_dsi.h | 2 ++ 4 files changed, 25 insertions(+), 5 deletions(-) -- 2.0.0