From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Courbot Subject: [PATCH v3 1/4] drm/dsi: Flag for non-continuous clock behavior Date: Tue, 8 Jul 2014 21:32:11 +0900 Message-ID: <1404822734-8603-2-git-send-email-acourbot@nvidia.com> References: <1404822734-8603-1-git-send-email-acourbot@nvidia.com> Return-path: In-Reply-To: <1404822734-8603-1-git-send-email-acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andrzej Hajda , Thierry Reding , Terje Bergstrom , Stephen Warren Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, Alexandre Courbot List-Id: linux-tegra@vger.kernel.org As per section 5.6.1 of the DSI specification, all DSI transmitters must support continuous clock behavior on the clock lane, while non-continuous mode support is only optional. Add a flag that allows devices to indicate that they support non-continuous clock mode so host drivers can adapt their behavior accordingly. Signed-off-by: Alexandre Courbot --- include/drm/drm_mipi_dsi.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index 944f33f..efa1b55 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -94,6 +94,8 @@ void mipi_dsi_host_unregister(struct mipi_dsi_host *host); #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) /* disable EoT packets in HS mode */ #define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) enum mipi_dsi_pixel_format { MIPI_DSI_FMT_RGB888, -- 2.0.0