From: Mikko Perttunen <mperttunen@nvidia.com>
To: rui.zhang@intel.com, edubezval@gmail.com, swarren@wwwdotorg.org,
thierry.reding@gmail.com
Cc: linux-tegra@vger.kernel.org,
Mikko Perttunen <mperttunen@nvidia.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v2 1/4] of: Add bindings for nvidia,tegra124-soctherm
Date: Tue, 5 Aug 2014 15:18:54 +0300 [thread overview]
Message-ID: <1407241137-32232-2-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1407241137-32232-1-git-send-email-mperttunen@nvidia.com>
This adds binding documentation and headers for the Tegra124
SOCTHERM device tree node.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
.../devicetree/bindings/thermal/tegra-soctherm.txt | 35 ++++++++++++++++++++++
include/dt-bindings/thermal/tegra124-soctherm.h | 13 ++++++++
2 files changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
create mode 100644 include/dt-bindings/thermal/tegra124-soctherm.h
diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
new file mode 100644
index 0000000..3505c8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
@@ -0,0 +1,35 @@
+Tegra124 SOCTHERM thermal management system
+
+Required properties :
+- compatible : "nvidia,tegra124-soctherm".
+- reg : Should contain 1 entry:
+ - SOCTHERM register set
+- interrupts : Defines the interrupt used by SOCTHERM
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - tsensor
+ - soctherm
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - soctherm
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
+ of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
+ list of valid values.
+
+
+Example :
+
+ soctherm@0,700e2000 {
+ compatible = "nvidia,tegra124-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+ <&tegra_car TEGRA124_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+
+ #thermal-sensor-cells = <1>;
+ };
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
new file mode 100644
index 0000000..85aaf66
--- /dev/null
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -0,0 +1,13 @@
+/*
+ * This header provides constants for binding nvidia,tegra124-soctherm.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+#define _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+
+#define TEGRA124_SOCTHERM_SENSOR_CPU 0
+#define TEGRA124_SOCTHERM_SENSOR_MEM 1
+#define TEGRA124_SOCTHERM_SENSOR_GPU 2
+#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
+
+#endif
--
1.8.1.5
next prev parent reply other threads:[~2014-08-05 12:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-05 12:18 [PATCH v2 0/4] Tegra124 soctherm driver Mikko Perttunen
2014-08-05 12:18 ` Mikko Perttunen [this message]
2014-08-05 13:34 ` [PATCH v2 1/4] of: Add bindings for nvidia,tegra124-soctherm Eduardo Valentin
2014-08-05 13:44 ` Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 3/4] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 4/4] thermal: Add Tegra SOCTHERM thermal management driver Mikko Perttunen
2014-08-05 12:24 ` Mikko Perttunen
[not found] ` <1407241137-32232-5-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-05 13:53 ` Eduardo Valentin
2014-08-06 7:30 ` Mikko Perttunen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407241137-32232-2-git-send-email-mperttunen@nvidia.com \
--to=mperttunen@nvidia.com \
--cc=edubezval@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox