[PATCH v4] drm/plane: Add optional ->atomic_disable() callback

[Thierry Reding <thierry.reding@gmail.com>]

From: Thierry Reding <treding@nvidia.com>

In order to prevent drivers from having to perform the same checks over
and over again, add an optional ->atomic_disable callback which the core
calls under the right circumstances.

v2: pass old state and detect edges to avoid calling ->atomic_disable on
already disabled planes, remove redundant comment (Daniel Vetter)

v3: rename helper to drm_atomic_plane_disabling() to clarify that it is
checking for transitions, move helper to drm_atomic_helper.h, clarify
check for !old_state and its relation to transitional helpers

Here's an extract from some discussion rationalizing the behaviour (for
a full version, see the reference below):

    > > Hm, thinking about this some more this will result in a slight difference
    > > in behaviour, at least when drivers just use the helper ->reset functions
    > > but don't disable everything:
    > > - With transitional helpers we assume we know nothing and call
    > >   ->atomic_disable.
    > > - With atomic old_state->crtc == NULL in the same situation right after
    > >   boot-up, but we asssume the plane is really off and _dont_ call
    > >   ->atomic_disable.
    > >
    > > Should we instead check for (old_state && old_state->crtc) and state that
    > > drivers need to make sure they don't have stuff hanging around?
    >
    > I don't think we can check for old_state because otherwise this will
    > always return false, whereas we really want it to force-disable planes
    > that could be on (lacking any more accurate information). For
    > transitional helpers anyway.
    >
    > For the atomic helpers, old_state will never be NULL, but I'd assume
    > that the driver would reconstruct the current state in ->reset().

    By the way, the reason for why old_state can be NULL with transitional
    helpers is the ordering of the steps in the atomic transition. Currently
    the Tegra patches do this (based on your blog post and the Exynos proto-
    type):

        1) atomic conversion, phase 1:
           - implement ->atomic_{check,update,disable}()
           - use drm_plane_helper_{update,disable}()

        2) atomic conversion, phase 2:
           - call drm_mode_config_reset() from ->load()
           - implement ->reset()

    That's only a partial list of what's done in these steps, but that's the
    only relevant pieces for why old_state is NULL.

    What happens is that without ->reset() implemented there won't be any
    initial state, hence plane->state (the old_state here) will be NULL the
    first time atomic state is applied.

    We could of course reorder the sequence such that drivers are required
    to hook up ->reset() before they can (or at the same as they) hook up
    the transitional helpers. We could add an appropriate WARN_ON to this
    helper to make that more obvious.

    However, that will not solve the problem because it only gets rid of the
    special case. We still don't know whether old_state->crtc == NULL is the
    current state or just the initial default.

    So no matter which way we do this, I don't see a way to get away without
    requiring specific semantics from drivers. They would be that:

        - drivers recreate the correct state in ->reset() so that
          old_state->crtc != NULL if the plane is really enabled

    or

        - drivers have to ensure that the real state in fact mirrors the
          initial default as encoded in the state (plane disabled)

References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/gpu/drm/drm_atomic_helper.c |  9 ++++++++-
 drivers/gpu/drm/drm_plane_helper.c  | 10 +++++++++-
 include/drm/drm_atomic_helper.h     | 37 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_plane_helper.h      |  3 +++
 4 files changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 010661f23035..1cb04402cd73 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1113,7 +1113,14 @@ void drm_atomic_helper_commit_planes(struct drm_device *dev,
 
 		old_plane_state = old_state->plane_states[i];
 
-		funcs->atomic_update(plane, old_plane_state);
+		/*
+		 * Special-case disabling the plane if drivers support it.
+		 */
+		if (drm_atomic_plane_disabling(plane, old_plane_state) &&
+		    funcs->atomic_disable)
+			funcs->atomic_disable(plane, old_plane_state);
+		else
+			funcs->atomic_update(plane, old_plane_state);
 	}
 
 	for (i = 0; i < ncrtcs; i++) {
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 2f961c180273..02c1a0b74e04 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -449,7 +449,15 @@ int drm_plane_helper_commit(struct drm_plane *plane,
 			crtc_funcs[i]->atomic_begin(crtc[i]);
 	}
 
-	plane_funcs->atomic_update(plane, plane_state);
+	/*
+	 * Drivers may optionally implement the ->atomic_disable callback, so
+	 * special-case that here.
+	 */
+	if (drm_atomic_plane_disabling(plane, plane_state) &&
+	    plane_funcs->atomic_disable)
+		plane_funcs->atomic_disable(plane, plane_state);
+	else
+		plane_funcs->atomic_update(plane, plane_state);
 
 	for (i = 0; i < 2; i++) {
 		if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 2095917ff8c7..a0ea4ded3cb5 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -127,4 +127,41 @@ void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
 
+/*
+ * drm_atomic_plane_disabling - check whether a plane is being disabled
+ * @plane: plane object
+ * @old_state: previous atomic state
+ *
+ * Checks the atomic state of a plane to determine whether it's being disabled
+ * or not. This also WARNs if it detects an invalid state (both CRTC and FB
+ * need to either both be NULL or both be non-NULL).
+ *
+ * RETURNS:
+ * True if the plane is being disabled, false otherwise.
+ */
+static inline bool
+drm_atomic_plane_disabling(struct drm_plane *plane,
+			   struct drm_plane_state *old_state)
+{
+	/*
+	 * When disabling a plane, CRTC and FB should always be NULL together.
+	 * Anything else should be considered a bug in the atomic core, so we
+	 * gently warn about it.
+	 */
+	WARN_ON((plane->state->crtc == NULL && plane->state->fb != NULL) ||
+		(plane->state->crtc != NULL && plane->state->fb == NULL));
+
+	/*
+	 * When using the transitional helpers, old_state may be NULL. If so,
+	 * we know nothing about the current state and have to assume that it
+	 * might be enabled.
+	 *
+	 * When using the atomic helpers, old_state won't be NULL. Therefore
+	 * this check assumes that either the driver will have reconstructed
+	 * the correct state in ->reset() or that the driver will have taken
+	 * appropriate measures to disable all planes.
+	 */
+	return (!old_state || old_state->crtc) && !plane->state->crtc;
+}
+
 #endif /* DRM_ATOMIC_HELPER_H_ */
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index a44139abbd5e..25b27ffd73c8 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -52,6 +52,7 @@ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
  * @cleanup_fb: cleanup a framebuffer when it's no longer used by the plane
  * @atomic_check: check that a given atomic state is valid and can be applied
  * @atomic_update: apply an atomic state to the plane (mandatory)
+ * @atomic_disable: disable the plane
  *
  * The helper operations are called by the mid-layer CRTC helper.
  */
@@ -65,6 +66,8 @@ struct drm_plane_helper_funcs {
 			    struct drm_plane_state *state);
 	void (*atomic_update)(struct drm_plane *plane,
 			      struct drm_plane_state *old_state);
+	void (*atomic_disable)(struct drm_plane *plane,
+			       struct drm_plane_state *old_state);
 };
 
 static inline void drm_plane_helper_add(struct drm_plane *plane,
-- 
2.1.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel