[GIT PULL 1/4] ARM: tegra: Device tree changes for v3.20

[GIT PULL 1/4] ARM: tegra: Device tree changes for v3.20

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-dt

for you to fetch changes up to 62981239a61bfd5306737effc015deba26c0d198:

  ARM: tegra: Update isl29028 compatible string to use isil vendor prefix (2015-01-09 13:42:04 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Device tree changes for v3.20

A couple of unit addresses fixes in device trees, addition of microphone
detection on Chromebook 13 and a vendor prefix update.

----------------------------------------------------------------
Arnaud Ebalard (1):
      ARM: tegra: Update isl29028 compatible string to use isil vendor prefix

Dmitry Osipenko (1):
      ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses

Dylan Reid (1):
      ARM: tegra: Enable the mic-detect gpio on Acer Chromebook 13

Thierry Reding (1):
      ARM: tegra: Fix unit address for Cortex-A9 TWD timer

 arch/arm/boot/dts/tegra124-nyan-big.dts |  2 ++
 arch/arm/boot/dts/tegra20.dtsi          | 10 +++++-----
 arch/arm/boot/dts/tegra30-cardhu.dtsi   |  2 +-
 arch/arm/boot/dts/tegra30.dtsi          |  2 +-
 4 files changed, 9 insertions(+), 7 deletions(-)

[GIT PULL 2/4] ARM: tegra: Default configuration changes for v3.20

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-defconfig

for you to fetch changes up to fe07e48964c6f21020eeeb7f83e35a5bf1977a65:

  ARM: tegra: Regenerate defconfig based on v3.19-rc1 (2015-01-06 14:10:57 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Default configuration changes for v3.20

This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.

----------------------------------------------------------------
Thierry Reding (1):
      ARM: tegra: Regenerate defconfig based on v3.19-rc1

 arch/arm/configs/tegra_defconfig | 2 --
 1 file changed, 2 deletions(-)

Re: [GIT PULL 2/4] ARM: tegra: Default configuration changes for v3.20

[Olof Johansson]

On Fri, Jan 23, 2015 at 04:59:58PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
> 
>   Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-defconfig
> 
> for you to fetch changes up to fe07e48964c6f21020eeeb7f83e35a5bf1977a65:
> 
>   ARM: tegra: Regenerate defconfig based on v3.19-rc1 (2015-01-06 14:10:57 +0100)

We usually don't do this for all configs on all releases -- just drop
them when you revisit the file for other reasons some other time. That
being said, no harm as long as only a few people do it every release
(i.e. we don't want this to creep up on diffstats).

Merged into next/defconfig.


-Olof

[GIT PULL 3/4] ARM: tegra: Core code changes for v3.20

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-soc

for you to fetch changes up to 3568df3d31d62b4368830cc6aac868cecdefd187:

  soc: tegra: Add thermal reset (thermtrip) support to PMC (2015-01-23 16:20:49 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Core code changes for v3.20

This contains a couple of preparatory patches for 64-bit support. A new
feature is implemented in the power-management controller which allows
it to switch off the SoC if it overheats.

----------------------------------------------------------------
Mikko Perttunen (3):
      of: Add descriptions of thermtrip properties to Tegra PMC bindings
      ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree
      soc: tegra: Add thermal reset (thermtrip) support to PMC

Paul Walmsley (1):
      soc/tegra: pmc: restrict compilation of suspend-related support to ARM

Thierry Reding (5):
      clocksource: Build Tegra timer on 32-bit ARM only
      soc/tegra: Add Tegra132 support
      soc/tegra: fuse: Constify tegra_fuse_info structures
      soc/tegra: fuse: Add Tegra132 support
      soc/tegra: pmc: Add Tegra132 support

 .../bindings/arm/tegra/nvidia,tegra20-pmc.txt      |  26 +++++
 arch/arm/boot/dts/tegra124-jetson-tk1.dts          |   7 ++
 arch/arm/mach-tegra/Kconfig                        |   4 +
 drivers/clocksource/Kconfig                        |   3 +
 drivers/clocksource/Makefile                       |   2 +-
 drivers/soc/tegra/fuse/fuse-tegra.c                |   1 +
 drivers/soc/tegra/fuse/fuse-tegra30.c              |   9 +-
 drivers/soc/tegra/pmc.c                            | 124 ++++++++++++++++++++-
 include/soc/tegra/fuse.h                           |   1 +
 include/soc/tegra/pm.h                             |   2 +-
 10 files changed, 167 insertions(+), 12 deletions(-)

Re: [GIT PULL 3/4] ARM: tegra: Core code changes for v3.20

[Olof Johansson]

On Fri, Jan 23, 2015 at 04:59:59PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
> 
>   Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-soc
> 
> for you to fetch changes up to 3568df3d31d62b4368830cc6aac868cecdefd187:
> 
>   soc: tegra: Add thermal reset (thermtrip) support to PMC (2015-01-23 16:20:49 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> ARM: tegra: Core code changes for v3.20
> 
> This contains a couple of preparatory patches for 64-bit support. A new
> feature is implemented in the power-management controller which allows
> it to switch off the SoC if it overheats.

Merged.


-Olof

[GIT PULL 4/4] arm64: Add initial Tegra support

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 3568df3d31d62b4368830cc6aac868cecdefd187:

  soc: tegra: Add thermal reset (thermtrip) support to PMC (2015-01-23 16:20:49 +0100)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-arm64

for you to fetch changes up to d035fdfa27ac124bc8f94c3d7dc82ad069802170:

  arm64: Add Tegra132 support (2015-01-23 16:32:52 +0100)

As you can see by the shortlog below this depends on the tegra-for-3.20-soc
pull request to resolve build time dependencies.

Thanks,
Thierry

----------------------------------------------------------------
arm64: Add initial Tegra support

This adds support for the Tegra132 SoC, which is essentially a Tegra124
with a dual Denver CPU complex instead of the quad-Cortex-A15. There is
not much here, only the Kconfig entries, but it will allow us to more
easily get subsequent patches in (many of which have already been sent
for review).

----------------------------------------------------------------
Paul Walmsley (1):
      arm64: Add Tegra132 support

Thierry Reding (1):
      Merge branch 'for-3.20/soc' into for-3.20/arm64

 arch/arm64/Kconfig | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Re: [GIT PULL 4/4] arm64: Add initial Tegra support

[Olof Johansson]

[cc:ing Catalin/Will so they're aware of cases when we touch the shared
Kconfig]

On Fri, Jan 23, 2015 at 05:00:00PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 3568df3d31d62b4368830cc6aac868cecdefd187:
> 
>   soc: tegra: Add thermal reset (thermtrip) support to PMC (2015-01-23 16:20:49 +0100)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-arm64
> 
> for you to fetch changes up to d035fdfa27ac124bc8f94c3d7dc82ad069802170:
> 
>   arm64: Add Tegra132 support (2015-01-23 16:32:52 +0100)
> 
> As you can see by the shortlog below this depends on the tegra-for-3.20-soc
> pull request to resolve build time dependencies.

Merged, thanks!


-Olof

Re: [GIT PULL 1/4] ARM: tegra: Device tree changes for v3.20

[Olof Johansson]

On Fri, Jan 23, 2015 at 04:59:57PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
> 
>   Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-3.20-dt
> 
> for you to fetch changes up to 62981239a61bfd5306737effc015deba26c0d198:
> 
>   ARM: tegra: Update isl29028 compatible string to use isil vendor prefix (2015-01-09 13:42:04 +0100)

Merged, thanks.


-Olof