From: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v2 10/19] clk: tegra: pll: Add logic for out-of-table rates for T210
Date: Wed, 29 Apr 2015 13:21:40 -0400 [thread overview]
Message-ID: <1430328109-537-11-git-send-email-rklein@nvidia.com> (raw)
In-Reply-To: <1430328109-537-1-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
For Tegra210, the logic to calculate out-of-table rates is different
from previous generations. Add callbacks that can be overridden to
allow for different ways of calculating rates. Default to
_cal_rate when not specified.
Based on original work by Aleksandr Frid <afrid-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/clk/tegra/clk-pll.c | 24 ++++++++++++++++++++++--
drivers/clk/tegra/clk.h | 10 ++++++++++
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 2a559408cee1..0b9cbe12a3eb 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -687,7 +687,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
}
if (_get_table_rate(hw, &cfg, rate, parent_rate) &&
- _calc_rate(hw, &cfg, rate, parent_rate)) {
+ pll->params->calc_rate(hw, &cfg, rate, parent_rate)) {
pr_err("%s: Failed to set %s rate %lu\n", __func__,
__clk_get_name(hw->clk), rate);
WARN_ON(1);
@@ -722,7 +722,7 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
return __clk_get_rate(hw->clk);
if (_get_table_rate(hw, &cfg, rate, *prate) &&
- _calc_rate(hw, &cfg, rate, *prate))
+ pll->params->calc_rate(hw, &cfg, rate, *prate))
return -EINVAL;
return cfg.output_rate;
@@ -912,12 +912,28 @@ const struct clk_ops tegra_clk_plle_ops = {
static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
unsigned long parent_rate)
{
+ u16 mdiv = parent_rate / pll_params->cf_min;
+
+ if (pll_params->flags & TEGRA_MDIV_NEW)
+ return (!pll_params->mdiv_default ? mdiv :
+ min(mdiv, pll_params->mdiv_default));
+
+ if (pll_params->mdiv_default)
+ return pll_params->mdiv_default;
+
if (parent_rate > pll_params->cf_max)
return 2;
else
return 1;
}
+u16 tegra_pll_get_fixed_mdiv(struct clk_hw *hw, unsigned long input_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+
+ return (u16)_pll_fixed_mdiv(pll->params, input_rate);
+}
+
static unsigned long _clip_vco_min(unsigned long vco_min,
unsigned long parent_rate)
{
@@ -1492,6 +1508,10 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll,
init.parent_names = (parent_name ? &parent_name : NULL);
init.num_parents = (parent_name ? 1 : 0);
+ /* Default to _calc_rate if unspecified */
+ if (!pll->params->calc_rate)
+ pll->params->calc_rate = _calc_rate;
+
/* Data in .init is copied by clk_register(), so stack variable OK */
pll->hw.init = &init;
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index f3c1f07d5332..b009c803f277 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -199,6 +199,8 @@ struct div_nmp {
* base register.
* TEGRA_PLL_BYPASS - PLL has bypass bit
* TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
+ * TEGRA_MDIV_NEW - Switch to new method for calculating fixed mdiv
+ * it may be more accurate (especially if SDM present)
*/
struct tegra_clk_pll_params {
unsigned long input_min;
@@ -235,7 +237,13 @@ struct tegra_clk_pll_params {
struct div_nmp *div_nmp;
struct tegra_clk_pll_freq_table *freq_table;
unsigned long fixed_rate;
+ bool vco_out;
+ u16 mdiv_default;
+ u32 (*round_p_to_pdiv)(u32 p, u32 *pdiv);
void (*set_gain)(struct tegra_clk_pll_freq_table *cfg);
+ int (*calc_rate)(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate);
};
#define TEGRA_PLL_USE_LOCK BIT(0)
@@ -249,6 +257,7 @@ struct tegra_clk_pll_params {
#define TEGRA_PLL_LOCK_MISC BIT(8)
#define TEGRA_PLL_BYPASS BIT(9)
#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
+#define TEGRA_MDIV_NEW BIT(11)
/**
* struct tegra_clk_pll - Tegra PLL clock
@@ -671,5 +680,6 @@ void tegra114_clock_deassert_dfll_dvco_reset(void);
typedef void (*tegra_clk_apply_init_table_func)(void);
extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
int tegra_pll_wait_for_lock(struct tegra_clk_pll *pll);
+u16 tegra_pll_get_fixed_mdiv(struct clk_hw *hw, unsigned long input_rate);
#endif /* TEGRA_CLK_H */
--
1.7.9.5
next prev parent reply other threads:[~2015-04-29 17:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-29 17:21 [PATCH v2 00/19] Tegra210 Clock Support Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 02/19] clk: tegra: periph: add new periph clks and muxes for Tegra210 Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 04/19] clk: tegra: pll: simplify clk_enable_path Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 05/19] clk: tegra: pll: update warning msg Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 06/19] clk: tegra: pll-params: change misc_reg count from 3 -> 6 Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 07/19] clk: tegra: pll: Don't unconditionally set LOCK flags Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 08/19] clk: tegra: pll: Add logic for handling SDM data Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 09/19] clk: tegra: pll: Add logic for SS Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 11/19] clk: tegra: pll: Add code to handle if resets are supported by PLL Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 12/19] clk: tegra: pll: Add specialized logic for T210 Rhyland Klein
[not found] ` <1430328109-537-13-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-04-29 18:27 ` Andrew Bresticker
2015-04-29 21:42 ` Rhyland Klein
[not found] ` <1430328109-537-1-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-04-29 17:21 ` [PATCH v2 01/19] clk: tegra: Modify tegra_audio_clk_init to accept more plls Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 03/19] clk: tegra: pll: add tegra_pll_wait_for_lock to clk header Rhyland Klein
2015-04-29 17:21 ` Rhyland Klein [this message]
2015-04-29 17:21 ` [PATCH v2 13/19] clk: tegra: pll: Add support for PLLMB for T210 Rhyland Klein
2015-04-30 10:11 ` Peter De Schrijver
2015-04-29 17:21 ` [PATCH v2 14/19] clk: tegra: pll: Adjust vco_min if SDM present Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 15/19] clk: tegra: pll: Add dyn_ramp callback Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 16/19] clk: tegra: pll: Add Set_default logic Rhyland Klein
[not found] ` <1430328109-537-17-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-04-30 10:12 ` Peter De Schrijver
[not found] ` <20150430101225.GU3097-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2015-04-30 15:31 ` Rhyland Klein
[not found] ` <55424ACA.9010406-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-11 11:50 ` Peter De Schrijver
[not found] ` <20150511115036.GG22637-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2015-05-11 15:07 ` Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 17/19] clk: tegra: pll: Fix _pll_ramp_calc_pll logic and _calc_dynamic_ramp_rate Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 18/19] clk: tegra: Add Super Gen5 Logic Rhyland Klein
2015-04-29 17:21 ` [PATCH v2 19/19] clk: tegra210: add support for Tegra210 clocks Rhyland Klein
2015-04-30 20:43 ` Andrew Bresticker
[not found] ` <CAL1qeaHdjb57D8U-NBeyicV=JP2pNkyx3Xfn2RDgWivdw5jWNg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-30 20:57 ` Rhyland Klein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430328109-537-11-git-send-email-rklein@nvidia.com \
--to=rklein-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).