linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: linux-kernel@vger.kernel.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Vinod Koul <vinod.koul@intel.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Alexandre Courbot <gnurou@gmail.com>,
	dmaengine@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH 6/6] drivers/dma: make tegra20-apb-dma.c explicitly non-modular
Date: Wed, 9 Dec 2015 18:22:02 -0500	[thread overview]
Message-ID: <1449703322-17762-7-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1449703322-17762-1-git-send-email-paul.gortmaker@windriver.com>

The Kconfig currently controlling compilation of this code is:

drivers/dma/Kconfig:config TEGRA20_APB_DMA
drivers/dma/Kconfig:    bool "NVIDIA Tegra20 APB DMA support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

We don't replace module.h with init.h since the file already has that.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: dmaengine@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/dma/tegra20-apb-dma.c | 35 ++++-------------------------------
 1 file changed, 4 insertions(+), 31 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 935da8192f59..eee783cee45b 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -3,6 +3,8 @@
  *
  * Copyright (c) 2012-2013, NVIDIA CORPORATION.  All rights reserved.
  *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -26,7 +28,6 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
@@ -1309,7 +1310,6 @@ static const struct of_device_id tegra_dma_of_match[] = {
 	}, {
 	},
 };
-MODULE_DEVICE_TABLE(of, tegra_dma_of_match);
 
 static int tegra_dma_probe(struct platform_device *pdev)
 {
@@ -1488,27 +1488,6 @@ err_irq:
 	return ret;
 }
 
-static int tegra_dma_remove(struct platform_device *pdev)
-{
-	struct tegra_dma *tdma = platform_get_drvdata(pdev);
-	int i;
-	struct tegra_dma_channel *tdc;
-
-	dma_async_device_unregister(&tdma->dma_dev);
-
-	for (i = 0; i < tdma->chip_data->nr_channels; ++i) {
-		tdc = &tdma->channels[i];
-		free_irq(tdc->irq, tdc);
-		tasklet_kill(&tdc->tasklet);
-	}
-
-	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_dma_runtime_suspend(&pdev->dev);
-
-	return 0;
-}
-
 static int tegra_dma_runtime_suspend(struct device *dev)
 {
 	struct tegra_dma *tdma = dev_get_drvdata(dev);
@@ -1616,15 +1595,9 @@ static struct platform_driver tegra_dmac_driver = {
 	.driver = {
 		.name	= "tegra-apbdma",
 		.pm	= &tegra_dma_dev_pm_ops,
+		.suppress_bind_attrs = true,
 		.of_match_table = tegra_dma_of_match,
 	},
 	.probe		= tegra_dma_probe,
-	.remove		= tegra_dma_remove,
 };
-
-module_platform_driver(tegra_dmac_driver);
-
-MODULE_ALIAS("platform:tegra20-apbdma");
-MODULE_DESCRIPTION("NVIDIA Tegra APB DMA Controller driver");
-MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(tegra_dmac_driver);
-- 
2.6.1

  reply	other threads:[~2015-12-09 23:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 23:21 [PATCH 0/6] drivers/dma: drop modular code from non modular drivers Paul Gortmaker
2015-12-09 23:22 ` Paul Gortmaker [this message]
     [not found] ` <1449703322-17762-1-git-send-email-paul.gortmaker-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>
2015-12-09 23:29   ` Arnd Bergmann
2015-12-10  0:17     ` Paul Gortmaker
     [not found]       ` <20151210001741.GT22885-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>
2015-12-10  3:12         ` Vinod Koul
2015-12-10  9:01         ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449703322-17762-7-git-send-email-paul.gortmaker@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=gnurou@gmail.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).