From: Rhyland Klein <rklein@nvidia.com>
To: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Mike Turquette <mturquette@baylibre.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Thierry Reding <thierry.reding@gmail.com>,
Alexandre Courbot <gnurou@gmail.com>,
Bill Huang <bilhuang@nvidia.com>, Jim Lin <jilin@nvidia.com>,
Benson Leung <bleung@chromium.org>,
linux-clk@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org, Rhyland Klein <rklein@nvidia.com>
Subject: [PATCH 2/9] clk: tegra210: Remove improper flags for lock_enable
Date: Fri, 8 Jan 2016 13:45:07 -0500 [thread overview]
Message-ID: <1452278714-10751-3-git-send-email-rklein@nvidia.com> (raw)
In-Reply-To: <1452278714-10751-1-git-send-email-rklein@nvidia.com>
Most PLL's don't actually have LOCK_ENABLE bits. However, most PLL's
also had that flag set, which meant that the clk code was trying to
enable locks, and inadvertantly flipping bits in other fields.
For PLLM, ensure the correct register is used for the misc_register.
PLL_MISC0 contains the EN_LCKDET bit which should be used for enabling
the lock, and PLLM_MISC1 shouldn't be used at all.
Lastly, remove some of the settings which would point to the EN_LCKDET
bits for some PLLs. There is no need to enable the locks, and that is
done as part of the set_defaults logic already.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
drivers/clk/tegra/clk-tegra210.c | 42 ++++++++++++++--------------------------
1 file changed, 14 insertions(+), 28 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 58514c44ea83..f45c9adf7fb2 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1386,7 +1386,7 @@ static struct tegra_clk_pll_params pll_c_params = {
.mdiv_default = 3,
.div_nmp = &pllc_nmp,
.freq_table = pll_cx_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1425,7 +1425,7 @@ static struct tegra_clk_pll_params pll_c2_params = {
.ext_misc_reg[2] = PLLC2_MISC2,
.ext_misc_reg[3] = PLLC2_MISC3,
.freq_table = pll_cx_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc2_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1455,7 +1455,7 @@ static struct tegra_clk_pll_params pll_c3_params = {
.ext_misc_reg[2] = PLLC3_MISC2,
.ext_misc_reg[3] = PLLC3_MISC3,
.freq_table = pll_cx_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc3_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1505,7 +1505,6 @@ static struct tegra_clk_pll_params pll_c4_vco_params = {
.base_reg = PLLC4_BASE,
.misc_reg = PLLC4_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
.lock_delay = 300,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLC4_MISC0,
@@ -1517,8 +1516,7 @@ static struct tegra_clk_pll_params pll_c4_vco_params = {
.div_nmp = &pllss_nmp,
.freq_table = pll_c4_vco_freq_table,
.set_defaults = tegra210_pllc4_set_defaults,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE |
- TEGRA_PLL_VCO_OUT,
+ .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1559,7 +1557,7 @@ static struct tegra_clk_pll_params pll_m_params = {
.vco_min = 800000000,
.vco_max = 1866000000,
.base_reg = PLLM_BASE,
- .misc_reg = PLLM_MISC1,
+ .misc_reg = PLLM_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLM_MISC_LOCK_ENABLE,
.lock_delay = 300,
@@ -1588,7 +1586,6 @@ static struct tegra_clk_pll_params pll_mb_params = {
.base_reg = PLLMB_BASE,
.misc_reg = PLLMB_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLMB_MISC_LOCK_ENABLE,
.lock_delay = 300,
.iddq_reg = PLLMB_MISC0,
.iddq_bit_idx = PLLMB_IDDQ_BIT,
@@ -1598,7 +1595,7 @@ static struct tegra_clk_pll_params pll_mb_params = {
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllm_nmp,
.freq_table = pll_m_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.set_defaults = tegra210_pllmb_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1671,7 +1668,6 @@ static struct tegra_clk_pll_params pll_re_vco_params = {
.base_reg = PLLRE_BASE,
.misc_reg = PLLRE_MISC0,
.lock_mask = PLLRE_MISC_LOCK,
- .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE,
.lock_delay = 300,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLRE_MISC0,
@@ -1681,8 +1677,7 @@ static struct tegra_clk_pll_params pll_re_vco_params = {
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllre_nmp,
.freq_table = pll_re_vco_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_LOCK_MISC |
- TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_VCO_OUT,
+ .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_LOCK_MISC | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllre_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1712,7 +1707,6 @@ static struct tegra_clk_pll_params pll_p_params = {
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLP_MISC_LOCK_ENABLE,
.lock_delay = 300,
.iddq_reg = PLLP_MISC0,
.iddq_bit_idx = PLLXP_IDDQ_BIT,
@@ -1721,8 +1715,7 @@ static struct tegra_clk_pll_params pll_p_params = {
.div_nmp = &pllp_nmp,
.freq_table = pll_p_freq_table,
.fixed_rate = 408000000,
- .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK |
- TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_VCO_OUT,
+ .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllp_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1750,7 +1743,7 @@ static struct tegra_clk_pll_params pll_a1_params = {
.ext_misc_reg[2] = PLLA1_MISC2,
.ext_misc_reg[3] = PLLA1_MISC3,
.freq_table = pll_cx_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _plla1_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
@@ -1787,7 +1780,6 @@ static struct tegra_clk_pll_params pll_a_params = {
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLA_MISC_LOCK_ENABLE,
.lock_delay = 300,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
@@ -1802,8 +1794,7 @@ static struct tegra_clk_pll_params pll_a_params = {
.ext_misc_reg[1] = PLLA_MISC1,
.ext_misc_reg[2] = PLLA_MISC2,
.freq_table = pll_a_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_MDIV_NEW |
- TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK | TEGRA_MDIV_NEW,
.set_defaults = tegra210_plla_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
@@ -1836,7 +1827,6 @@ static struct tegra_clk_pll_params pll_d_params = {
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLD_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.iddq_reg = PLLD_MISC0,
.iddq_bit_idx = PLLD_IDDQ_BIT,
@@ -1850,7 +1840,7 @@ static struct tegra_clk_pll_params pll_d_params = {
.ext_misc_reg[0] = PLLD_MISC0,
.ext_misc_reg[1] = PLLD_MISC1,
.freq_table = pll_d_freq_table,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.mdiv_default = 1,
.set_defaults = tegra210_plld_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
@@ -1876,7 +1866,6 @@ static struct tegra_clk_pll_params pll_d2_params = {
.base_reg = PLLD2_BASE,
.misc_reg = PLLD2_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
.lock_delay = 300,
.iddq_reg = PLLD2_BASE,
.iddq_bit_idx = PLLSS_IDDQ_BIT,
@@ -1897,7 +1886,7 @@ static struct tegra_clk_pll_params pll_d2_params = {
.mdiv_default = 1,
.freq_table = tegra210_pll_d2_freq_table,
.set_defaults = tegra210_plld2_set_defaults,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
@@ -1920,7 +1909,6 @@ static struct tegra_clk_pll_params pll_dp_params = {
.base_reg = PLLDP_BASE,
.misc_reg = PLLDP_MISC,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
.lock_delay = 300,
.iddq_reg = PLLDP_BASE,
.iddq_bit_idx = PLLSS_IDDQ_BIT,
@@ -1941,7 +1929,7 @@ static struct tegra_clk_pll_params pll_dp_params = {
.mdiv_default = 1,
.freq_table = pll_dp_freq_table,
.set_defaults = tegra210_plldp_set_defaults,
- .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+ .flags = TEGRA_PLL_USE_LOCK,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
@@ -1973,7 +1961,6 @@ static struct tegra_clk_pll_params pll_u_vco_params = {
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC0,
.lock_mask = PLL_BASE_LOCK,
- .lock_enable_bit_idx = PLLU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.iddq_reg = PLLU_MISC0,
.iddq_bit_idx = PLLU_IDDQ_BIT,
@@ -1983,8 +1970,7 @@ static struct tegra_clk_pll_params pll_u_vco_params = {
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllu_nmp,
.freq_table = pll_u_freq_table,
- .flags = TEGRA_PLLU | TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE |
- TEGRA_PLL_VCO_OUT,
+ .flags = TEGRA_PLLU | TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllu_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
--
1.9.1
next prev parent reply other threads:[~2016-01-08 18:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-08 18:45 [PATCH 0/9 REPOST] Tegra CLK Fixes Rhyland Klein
2016-01-08 18:45 ` [PATCH 1/9] clk: tegra: Fix divider on VI_I2C Rhyland Klein
2016-01-08 18:45 ` Rhyland Klein [this message]
[not found] ` <1452278714-10751-1-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-08 18:45 ` [PATCH 3/9] clk: tegra210: Fix naming of MISC registers Rhyland Klein
2016-01-08 18:45 ` [PATCH 4/9] clk: tegra: Fix the misnaming of nvenc from msenc Rhyland Klein
2016-01-08 18:45 ` [PATCH 5/9] clk: tegra: pll: Fix potential sleeping-while-atomic Rhyland Klein
2016-01-08 18:45 ` [PATCH 6/9] clk: tegra210: fix pllx dyn step calculation Rhyland Klein
2016-01-08 18:45 ` [PATCH 7/9] clk: tegra: pll: Do not disable PLLE when under HW control Rhyland Klein
2016-01-08 18:45 ` [PATCH 8/9] clk: tegra: pll: Fix PLLE SS config Rhyland Klein
2016-01-13 14:00 ` Thierry Reding
2016-01-08 18:45 ` [PATCH 9/9] clk: tegra210: Initialize PLL_D2 to a sane rate Rhyland Klein
[not found] ` <1452278714-10751-10-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 14:03 ` Thierry Reding
2016-01-13 16:27 ` Rhyland Klein
[not found] ` <56967ADD.8090904-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 17:28 ` Thierry Reding
2016-01-13 14:05 ` [PATCH 0/9 REPOST] Tegra CLK Fixes Thierry Reding
-- strict thread matches above, loose matches on Subject: below --
2016-01-08 18:37 Rhyland Klein
2016-01-08 18:37 ` [PATCH 2/9] clk: tegra210: Remove improper flags for lock_enable Rhyland Klein
2015-12-10 22:08 [PATCH 0/9] Tegra CLK Fixes Rhyland Klein
2015-12-10 22:08 ` [PATCH 2/9] clk: tegra210: Remove improper flags for lock_enable Rhyland Klein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452278714-10751-3-git-send-email-rklein@nvidia.com \
--to=rklein@nvidia.com \
--cc=bilhuang@nvidia.com \
--cc=bleung@chromium.org \
--cc=gnurou@gmail.com \
--cc=jilin@nvidia.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).