From: Penny Chiu <pchiu@nvidia.com>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com,
gnurou@gmail.com, pdeschrijver@nvidia.com, pgaikwad@nvidia.com,
rjw@rjwysocki.net, viresh.kumar@linaro.org
Cc: linux-pwm@vger.kernel.org, linux-pm@vger.kernel.org,
mturquette@baylibre.com, sboyd@codeaurora.org,
linux-kernel@vger.kernel.org, Penny Chiu <pchiu@nvidia.com>,
linux-tegra@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/11] clk: tegra: Add Tegra210 support in DFLL driver
Date: Fri, 22 Apr 2016 18:31:04 +0800 [thread overview]
Message-ID: <1461321071-6431-5-git-send-email-pchiu@nvidia.com> (raw)
In-Reply-To: <1461321071-6431-1-git-send-email-pchiu@nvidia.com>
Add Tegra210 support and related CVB table in tegra124 DFLL driver,
and also update the binding document.
Signed-off-by: Penny Chiu <pchiu@nvidia.com>
---
.../bindings/clock/nvidia,tegra124-dfll.txt | 4 +-
drivers/clk/tegra/Makefile | 4 +-
drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 55 ++++++++++++++++++++++
3 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
index 84080a8..42a1fe6 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -11,7 +11,9 @@ communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
Currently only the I2C mode is supported by these bindings.
Required properties:
-- compatible : should be "nvidia,tegra124-dfll"
+- compatible : should be one of following:
+ - "nvidia,tegra124-dfll" for the Tegra124 SoC
+ - "nvidia,tegra210-dfll" for the Tegra210 SoC
- reg : Defines the following set of registers, in the order listed:
- registers for the DFLL control logic.
- registers for the I2C output logic.
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index 97984c5..9b8e9de 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -17,7 +17,9 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o
-obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124-dfll-fcpu.o
+ifneq ($(filter y, $(CONFIG_ARCH_TEGRA_124_SOC) $(CONFIG_ARCH_TEGRA_210_SOC)),)
+obj-y += clk-tegra124-dfll-fcpu.o
+endif
obj-$(CONFIG_ARCH_TEGRA_132_SOC) += clk-tegra124.o
obj-y += cvb.o
obj-$(CONFIG_ARCH_TEGRA_210_SOC) += clk-tegra210.o
diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
index b577bc6..6b3316c 100644
--- a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
+++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
@@ -44,6 +44,11 @@ static const unsigned long tegra124_cpu_max_freq_table[] = {
[3] = 2524500000UL,
};
+static const unsigned long tegra210_cpu_max_freq_table[] = {
+ [0] = 1912500000UL,
+ [1] = 1912500000UL,
+};
+
static const struct cvb_table tegra124_cpu_cvb_tables[] = {
{
.speedo_id = -1,
@@ -87,6 +92,45 @@ static const struct cvb_table tegra124_cpu_cvb_tables[] = {
},
};
+static const struct cvb_table tegra210_cpu_cvb_tables[] = {
+ {
+ .speedo_id = -1,
+ .process_id = -1,
+ .min_millivolts = 850,
+ .max_millivolts = 1170,
+ .speedo_scale = 100,
+ .voltage_scale = 1000,
+ .cvb_table = {
+ {51000000UL, {1007452, -23865, 370} },
+ {102000000UL, {1007452, -23865, 370} },
+ {204000000UL, {1007452, -23865, 370} },
+ {306000000UL, {1052709, -24875, 370} },
+ {408000000UL, {1099069, -25895, 370} },
+ {510000000UL, {1146534, -26905, 370} },
+ {612000000UL, {1195102, -27915, 370} },
+ {714000000UL, {1244773, -28925, 370} },
+ {816000000UL, {1295549, -29935, 370} },
+ {918000000UL, {1347428, -30955, 370} },
+ {1020000000UL, {1400411, -31965, 370} },
+ {1122000000UL, {1454497, -32975, 370} },
+ {1224000000UL, {1509687, -33985, 370} },
+ {1326000000UL, {1565981, -35005, 370} },
+ {1428000000UL, {1623379, -36015, 370} },
+ {1530000000UL, {1681880, -37025, 370} },
+ {1632000000UL, {1741485, -38035, 370} },
+ {1734000000UL, {1802194, -39055, 370} },
+ {1836000000UL, {1864006, -40065, 370} },
+ {1912500000UL, {1910780, -40815, 370} },
+ {0, { 0, 0, 0} },
+ },
+ .cpu_dfll_data = {
+ .tune0_low = 0xffead0ff,
+ .tune0_high = 0xffead0ff,
+ .tune1 = 0x20091d9,
+ }
+ },
+};
+
static const struct dfll_fcpu_data tegra124_dfll_fcpu_data = {
.cpu_max_freq_table = tegra124_cpu_max_freq_table,
.cpu_max_freq_table_size = ARRAY_SIZE(tegra124_cpu_max_freq_table),
@@ -94,11 +138,22 @@ static const struct dfll_fcpu_data tegra124_dfll_fcpu_data = {
.cpu_cvb_tables_size = ARRAY_SIZE(tegra124_cpu_cvb_tables)
};
+static const struct dfll_fcpu_data tegra210_dfll_fcpu_data = {
+ .cpu_max_freq_table = tegra210_cpu_max_freq_table,
+ .cpu_max_freq_table_size = ARRAY_SIZE(tegra210_cpu_max_freq_table),
+ .cpu_cvb_tables = tegra210_cpu_cvb_tables,
+ .cpu_cvb_tables_size = ARRAY_SIZE(tegra210_cpu_cvb_tables)
+};
+
static const struct of_device_id tegra124_dfll_fcpu_of_match[] = {
{
.compatible = "nvidia,tegra124-dfll",
.data = &tegra124_dfll_fcpu_data
},
+ {
+ .compatible = "nvidia,tegra210-dfll",
+ .data = &tegra210_dfll_fcpu_data
+ },
{ },
};
MODULE_DEVICE_TABLE(of, tegra124_dfll_fcpu_of_match);
--
2.8.1
next prev parent reply other threads:[~2016-04-22 10:31 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 10:31 [PATCH 00/11] arm64: tegra: Add Tegra DFLL for Tegra210 Jetson TX1 Penny Chiu
2016-04-22 10:31 ` [PATCH 01/11] clk: tegra: dfll: Fix voltage comparison Penny Chiu
2016-04-22 10:31 ` [PATCH 02/11] clk: tegra: dfll: Move SoC specific data into of_device_id Penny Chiu
2016-04-22 13:04 ` Thierry Reding
2016-04-22 10:31 ` [PATCH 03/11] clk: tegra: Add DFLL DVCO reset control for Tegra210 Penny Chiu
2016-04-22 13:11 ` Thierry Reding
2016-04-22 10:31 ` Penny Chiu [this message]
2016-04-22 13:16 ` [PATCH 04/11] clk: tegra: Add Tegra210 support in DFLL driver Thierry Reding
2016-04-22 10:31 ` [PATCH 05/11] pwm: tegra-dfll: Add driver for Tegra DFLL PWM controller Penny Chiu
2016-04-22 12:55 ` Thierry Reding
2016-05-06 23:15 ` Stephen Boyd
2016-05-06 23:21 ` Stephen Warren
2016-04-22 10:31 ` [PATCH 06/11] clk: tegra: dfll: Add PWM inferface Penny Chiu
2016-04-22 10:31 ` [PATCH 07/11] cpufreq: tegra124: Add Tegra210 support Penny Chiu
[not found] ` <1461321071-6431-8-git-send-email-pchiu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-04-22 11:00 ` Viresh Kumar
2016-04-22 10:31 ` [PATCH 08/11] arm64: tegra: Add PWM regulator for CPU rail on Jetson TX1 Penny Chiu
2016-04-22 10:31 ` [PATCH 09/11] arm64: tegra: Add DFLL clock node " Penny Chiu
[not found] ` <1461321071-6431-10-git-send-email-pchiu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-04-22 13:28 ` Thierry Reding
2016-04-22 10:31 ` [PATCH 10/11] arm64: tegra: Add clock properties on cpu0 for Tegra210 Penny Chiu
2016-04-22 11:44 ` Jon Hunter
2016-04-22 13:23 ` Thierry Reding
2016-04-22 13:36 ` Jon Hunter
[not found] ` <1461321071-6431-1-git-send-email-pchiu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-04-22 10:31 ` [PATCH 11/11] arm64: config: Enable CPUFreq-DT, Tegra DFLL PWM, and PWM regulator Penny Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461321071-6431-5-git-send-email-pchiu@nvidia.com \
--to=pchiu@nvidia.com \
--cc=gnurou@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=rjw@rjwysocki.net \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).