[PATCH 0/4] soc/tegra: Turn on XUSB partitions

Jon Hunter
2016-06-30T10:56:23Z

The Tegra XHCI driver currently assumes the XUSB power partitions have
been enabled by the bootloader. This is not for the Tegra210 Smaug board
and so cause the kernel to hang when enabling XHCI support. Although the
XHCI driver itself needs to manage these partitions, for now enable the
partitions if the XHCI driver is enabled.

In order to do this I have made a fundamental change to the PMC driver
to initialise the power partitions during early init. A benefit of this
is that if CONFIG_PM_GENERIC_DOMAINS is not enabled, then we can simply
turn on the partitions early before any devices are probed.

This is based upon the PMC fixes series [0].

Changes from initial RFC:
- Added patch to add more detailed error messages when initialising
powergates.

[0] http://marc.info/?l=linux-tegra&m=146711078013182&w=2

Jon Hunter (4):
soc/tegra: pmc: Add specific error messages for initialising a
powergate
soc/tegra: pmc: Initialise power partitions early
soc/tegra: pmc: Enable XUSB partitions on boot
arm64: tegra210: Add XUSB powergates

arch/arm64/boot/dts/nvidia/tegra210.dtsi | 24 +++++++++++++
drivers/soc/tegra/pmc.c | 60 +++++++++++++++++++++++---------
2 files changed, 67 insertions(+), 17 deletions(-)

--
2.1.4