Re: [PATCH v1] clk: tegra20: Add 216 MHz entry for PLL_X

[Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 12.12.2017 18:17, Peter De Schrijver wrote:
> On Tue, Dec 12, 2017 at 03:08:08PM +0300, Dmitry Osipenko wrote:
>> On 12.12.2017 13:02, Peter De Schrijver wrote:
>>> On Mon, Dec 11, 2017 at 09:50:09PM +0300, Dmitry Osipenko wrote:
>>>> The cpufreq driver uses 216 MHz as the lowest CPU clock frequency, but
>>>> clock driver doesn't provide that rate, so the requested clock is rounded
>>>> up to 312 MHz. Let's add entry for 216 MHz to match with cpufreq.
>>>>
>>>
>>> This seems odd. If there's no table entry, _calc_rate should kick in and
>>> calculate the parameters for 216MHz. Any idea why this is not happening?
>>
>> Actually, it is happening. Please ignore this patch.
>>
>> If PLL's rate could be calculated, why do we need the predefined tables?
> 
> The algorithm to calculate the PLL parameters is rather crude. It will
> favour undershooting the rate rather than overshooting. This is fine for
> DVFS usecases when you want to avoid a too high clock rate, but not good
> for eg display or memory, where as close as match as possible is needed.
Okay, thank you for the clarification.